FOR SALE: Anderson Kingfisher Kit (1/4 scale) with NIB SV-26
OL: 70.0 OW:`108.0 AUW: approx. 20-25 lbs depending on engine choice, finish etc.
I've always wanted to build/fly one of these beauties, but reality has set-in and I know I won't get to it any time soon. This is the 1/4 scale version of the Anderson Kingfisher Float Plane, modified by the Kingfisher Master himself, Tim Nolan out of Australia. He was kind enough to produce & ship this kit before he traveled from Australia to the 2015 Salmon Arm Float-Fly held in British Columbia. What you will receive is as follows:
-SV-26 gas engine NIB, have Bowman rings for it, ready to install. -three blade 3.0 spinner, three blade nylon prop. -two Hitec HS-125MG thin-metal gear wing servos for elevator. -Vacuumed bagged epoxy fuselage (sandwich construction) in grey primer, with carbon fiber reinforcements in key structural areas added in the mold! -molded fiberglass front hatch access cover. -molded fiberglass engine cowl & nacelle. -cut to shape foam tip floats. -laser cut ribs, engine center section and firewalls etc. -machined aluminum strut ends and strut tubing. -partially formed material for the metal spray rails. -printed plans for wings & tail surfaces. -flash stick with hundreds of construction photos & building notes.
This is a large box for shipping, as the fuselage alone is approx. 70.0 L x 11.0 W x 20.0 H! Kit will ship from Sweet Grass MT 59484, with a box dimension of 72.0 x 14.0 x 24.0 and approximate weight of 25.0 lbs. Engine will need to be shipped separately if I can't fit everything into one large box. If you prefer to use Pay Pal, add 3% for their fees.
Last login: 10/20/2017 5:30:PM
Location: AB, CANADA
Yes this plane can be shipped, probably UPS or FedEx? I have a brand new SV-26 I was going to use if interested? Would throw the engine in along with the two Hitec narrow wing servos you'll need for the elevators for 650.00