I built a 3 piece wing to make transportation easier. It uses a single wing tube with an anti-rotation pin. The wing servo automatically connects to the fuselage thru a multiplex connector when the wing is pushed on. There are no servo leads that need to be plugged in.
The landing gear is the Dreamworks Pro-Link gear and brake system. All 3 gears are trailing link design. The brake valve is the reliable Jet-Tronics low loss proportional pneumatic brake valve. Jet-Tech made a custom fuel cell that holds about 107 ounces. I prefer not to ship, but will drive a reasonable distance up to one hour away to meet you. If shipped there needs to be several boxes and charges will be actual UPS shipping to your location including insurance. Airframe with servos and fuel cell only.
See more photos Turbinator pictures: Turbinator pictures https://www.dropbox.com/sh/cvf8volrv2fgm08/AADz8YfzX6aqNXwdrp77We2ya?dl=0 Note - photos show airframe with engine and receiver components still in place but they have been removed.
A. E. Haas, MD Venice Plastic Surgery 836 Sunset Lake Blvd Ste 103 Venice, FL 34292-7555