Here is a DX18 transmitter, charger, SD card, battery and instructions used very little. Mode two is the normal mode most RC radios come in. There is option for mode 1 which puts the throttle on your right side.
Key Features •250-model memory •Built-in telemetry with vibration alerts •Extensive airplane, helicopter and sailplane programming •Throttle start or switch start timer •Region settings for global compliance •16 programmable mixes •Flap delay and elevator compensation •10 airplane wing types •6 airplane tail types •5 airplane and heli flight modes •Dual rates and expo •Active gyro trim •7-point heli throttle curve •7-point heli pitch curve •7-point heli tail curve •6 swashplate types •Swashplate timing •5 sailplane wing types •3 sailplane tail types •10 sailplane flight modes •Global charging system •X-Plus™ technology expandability up to 18 channels •11ms frame rate •Large LCD screen •2048 resolution on the first 10 channels •Language selectable
Product Specifications # of Channels: 18Modulation: DSM2/DSMXBand: 2.4GHzServos: none includedReceiver: none includedProgramming Features: Airplane/Helicopter/SailplaneModel Memory: 250Transmitter (Tx) Battery Type: 2600mAh (19.24Wh) - 2S LiPoCharger: none includedExperience Level: Advanced Overview Powerful Features for the Expert Pilot The Spektrum™ AirWare™ software that comes in the DX18 offers all the programming features an expert pilot could want. And the intuitive SimpleScroll™ interface makes navigating menus and changing settings as simple as roll and click. It's almost like using a mouse.
Many Spektrum AirWare features are innovations you won't find anywhere else; innovations that make flying safer and programming easier.
Pro-Class Programming for Sailplanes In addition to extensive airplane and heli programming, the DX18 has the most impressive sailplane programming features you'll find in any handheld transmitter. Ten available flight modes, 5 wing types, 3 tail types, 2 motor types, flap delay with elevator compensation – it has it all. You even have the ability to adjust individual servo characteristics (end points, travel, center, etc.) for all 18 channels.
Built-In Sequencer Program a sequence of switch-activated events with time delays between each event. For instance, with a flip of the gear switch you could have an auxiliary channel open landing gear doors, then have the retract channel lower the landing gear, followed by the auxiliary channel closing the gear doors after the gear is extended.
Built-In Servo Balancer No more will you need a complicated network of little boxes littering your fuselage if you want to balance servos. You can precisely balance the output of swashplate servos or multiple servos on a single control surface with the transmitter using a 7-point curve mix.
250-Model Memory The enormous capacity of the DX18's on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easier to navigate too. Only memory slots with model settings saved to them will appear. You won't have to scroll through empty slots or move models around if one is deleted.
Because this DX18 uses the same software platform as the DX6 Gen 2, DX7 Gen 2, DX9 and DX18 Gen 2, you can share model setups with owners of those transmitters as well.
Stay Up to Date Register your DX18 and receive alerts whenever Spektrum Airware™ software updates are available.
Programming Features The DX18 has all the programming functions you need to fly everything from tiny collective pitch helis to competition sailplanes and giant-scale jets.
Airplane • 11 Wing Types: Single Aileron, Dual Aileron, Flaperon, Single Aileron + Single Flap, Single Aileron + Dual Flap, Dual Aileron + Single Flap, Dual Aileron + Dual Flap, Elevon, Elevon B, Quad Aileron, Six Aileron • 6 Tail Types: Normal, V-Tail A, V-Tail B, Dual Elevator, Dual Rudder, Dual Rudder + Dual Elevator • Flap Delay and Elevator Compensation • 5 Flight Modes • Dual Rates and Expo • 16 Programmable Mixes
Sailplane • 5 Wing Types: Single Aileron, Dual Aileron, Dual Aileron + Single Flap, Dual Aileron + Dual Flap, Quad Aileron + Dual Flap • 3 Tail Types: Normal, V-Tail A, V-Tail B • Motor Throttle Switch Assignment • Aileron and V-tail Differential • Camber System • Camber Preset • Flap Delay and Elevator Compensation • 10 Flight Modes • Dual Rates and Expo • 16 Programmable Mixes
Max Out Your Functions. Both the DX18 and the AR9020 receiver have X-Plus™ channel expansion capabilities. This means you can add up to eight extra channels with an X-Plus channel expansion module (SPMXP8000 – sold separately). Just plug the module into the receiver, bind it and then assign the extra channels to any function you want.
Fly Smarter with Built-In Telemetry. Built-in telemetry gives you real-time information on things like your model's battery voltage, signal quality, engine or motor temperature, airspeed, altitude and more. You can have the DX18 alert you whenever any of these parameters exceed limits you define. You also have the option of logging telemetry data to the transmitter’s SD card for review after the flight.
A Spektrum TM1000 telemetry module and telemetry sensors (all sold separately) are required. You will find there are Spektrum telemetry sensors for tracking just about any model function you can think of, and new ones are being added all the time.
Superior Ergonomics. Made to Fit the Way You Fly. The weight distribution and ergonomics of the DX18 have been optimized to fit the way you fly. The result is a sense of balance and comfort that perfectly complements the speed and precision of DSMX technology.