Been working on and off with it for 2 years. Lost intrest
Willing to Trade:
This plane was laser cut by Camden Custom Cutters. It is semi-scale. From Dick Barron plans. Flat bottom airfoil. Covered in Solartex. Fiberglass ring cowl. Hand made wheel pants from laminated wood, sealed, sanded and painted. over 80hrs of work just on them!!! There are new 144oz/in. servos in the wings. High torques for the rearend. No throttle servo as of yet. But the whole chin in front is detachable for great accessibility to that work area. Simulated rivet detail on one clean smooth & shaped fuse. 32oz. tank with good access. Scale tail feathers with Dubro pinned hinges. Ailerons are Robert pin hinged. 8ft.span. Plane was built strong with 30 minute epoxy in high stress areas. Aluminum tubes for wing panels. Wires run to all existing servos.Pushrod Linkage there for rudder,, but requirescontrol horn mounting & hook up. Elevator linkage and control horn needs mounted. Scale apperance tailwheel needs final shaping. Arresting hook on bottom detaches so hook lays down. So you see, all the heavy except for engine and servo has been done. She's a big, bad, beautiful girl, and a truly one of a kind plane. Bolt on tail assembly. All graphics were hand made out of Solartex, No vinyl on this girl! I have scads of photos, just too much to show here. If you want to put in your own servo's I will keep whats in there now and we can deal on the price. Read the text... NO SHIPPING. I intended to mount a radial up front, hence the heavy duty fire wall. Here's your chance to have a unique plane. It ain't no top gun, but still very nice. Check out the mirror finish on the cowl! I have invested both great time and money on this project, and I just feel its ready for a new home, I want to move onto a new project. Plus she takes up a lot of room. 1250.00 O. B.O.