RC Classifieds > Engines & Motors > Gasoline Engines > Airplane
 
DLE DLE-20
Views: 135

THIS ITEM IS SOLD!

 
SHOPPER CONTROL PANEL
  • Sign up Free to Respond!
    Check Book Values
    Tell A Friend
  •  
    Item Number 1114237
    Quantity 0
    Asking Price USD $200.00
    Placed 08/01/2017 2:06:32 PM
    Offer History View Offers

    (Stock Photo)

    Transaction Details
    Item Location:
    Dunnellon , FL USA
    See Map

    I will ship to:
    US & Canada Only

    Shipping Terms:
    Buyer pays actual shipping costs to be determined at closing

    Special Shipping Instructions:
    None Given

    Payment Forms Accepted:
    See Item Description

    Payment Terms:
    None Given
     
    Seller Details
    Seller: JSZ
    Last login: 10/16/2017 7:22:PM  

                This member is address verified and upgraded with RCUniverse!

    Average Response Time: This measurement shows how responsive the seller has been over the past 3 months. Measurements started with offers and questions placed on January 17, 2006.
    - Offers: 6.65 hours
    - Questions: 9.72 hours

    Ratings:
    - 77 member ratings ( 73 Good | 4 Poor )

    History:
  • Member Since Mar 2002
  • Auctions placed: 2
  • Classifieds placed: 383

    See other items from this seller

  • Product Guide Information
     This product appears in the RCUniverse product guide. Learn more about this product.
      This product's member rating when new (7 Reviews):

    Get More Product Details

    Item Details
    Condition:New in Box
     
    Why Selling: Not needed
     
    Willing to Trade: No

    Item Description:

    This is the DLE 20cc Gasoline Powered Engine with Electronic Ignition
    FEATURES
    Two sealed bearings on crankshaft-simple design for lighter weight
    Beam mounting allows easy fit in the same mount as comparable glow
    engines
    Aluminum alloy crankcase with advanced CNC machining
    Rear mounted pumper carburetor ensures easier installation and smooth
    idling and dependable fuel flow during flights
    Fully automatic electronic ignition
    Two year limited warranty through Hobby Services beginning at date
    of purchase
    INCLUDES
    Engine, spark plug, ignition, muffler, muffler gasket, two 5x20mm
    muffler bolts and instruction manual
    REQUIREMENTS
    Gasoline with at least 87 octane rating
    2-cycle oil, mix ratio for this engine is 30 parts gas to one part
    oil and must be followed exactly for warranty consideration
    and optimum performance
    4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
    (separate receiver style pack can be used)
    **NOTE, If ignition module is the A-02 model it has a built-in
    voltage regulator. Model A-02 designation is located above the
    word Ignition on top of the case**
    LiPo & LiFe batteries require voltage regulator on older A-01
    ignition module
    Propeller and field equipment
    SPECIFICATIONS
    Output Power: 2.5 HP at 9,000 RPM
    Idle Speed: 1,750 RPM
    Static Thrust: 6 kg Pulling Force/100 meters altitude
    5.3 kg Pulling Force/1,800 meters altitude
    Displacement: 1.22cu in (20cc)
    Bore and Stroke: 1.3 x 1.0 (32 x 25mm)
    Compression Ratio: 10.5:1
    Weight: Engine: 22.93oz.(650g)
    Exhaust: 1.76oz (50g)
    Ignition: 4.23oz (120g)
    Total: 28.9oz (820g)
    Gasoline/Oil Mixture: 30:1
    Gasoline Octane Rating: 87-93
    Recommended Propellers: 14x10, 15x8, 16x6, 16x8, 17x6, 18x6
    (break-in prop not specified)
    Ignition Battery: 4.8V min,max as marked on electronic ignition unit.
    If marked 6V max, BEC required if LiPo battery used.
    Newer ones may be marked 4.8V to 8.4V.
    Replacement Spark Plug: CM3, DLEG2126
    Spark Plug Gap: 0.018 - 0.020
    Plug Installation Torque: 7 - 8ft-lbs
    Carburetor Adjustments;
    Low Speed Needle: 1.5 turns out as a starting point, adjust for a
    smooth idle and a reliable transition to high throttle
    High Speed Needle: 1.5-2 turns out from closed, adjust needle to peak
    RPM, if engine slows or dies at full throttle, the high-speed
    mixture is likely too lean
    Height from bottom/Crankcase to top of Cylinder Head: 5.4 (138mm)
    Height/bottom/of Mounting Tab to top of Cylinder Head: 3.4 (87.5mm)
    Width of Cylinder Head: 2.5 (65mm)
    Width at Mounting Tabs: 2.8 (70.5mm)
    Distance/Mounting Hole Centers Same Side: 1.0 (26mm)
    Distance/Mounting Hole Centers Opposite Side: 2.4 (60mm)
    Height of Exhaust Opening: 0.42 (10.8mm)
    Width of Exhaust Opening: 0.83 (21mm)
    Length from Carburetor to Front Bearing: 4.5 (114mm)
    Length from Carburetor to Prop Hub: 5.1 (130mm)
    Total Height of Muffler including Exhaust Pipe: 3.8 (96mm)
    Center of Muffler Exhaust Opening to end of Pipe: 2.4 (61mm)
    Muffler Width: 2 (52.1mm)
    Exhaust Pipe Inner Diameter: 0.56 (14.2mm)
    Crankshaft thread size: 8mm x 1mm


     
    Photo Gallery

    Click photos to see enlarged images
     

    (Stock Photo)
    DLE DLE-20
    Right-click to save
     
    Member Posts to this Ad
     
    WHY IT'S CRITICAL FOR BUYERS TO USE THE "MAKE OFFER" FORM VS. EMAIL

      


    OTHER ITEMS FROM JSZ
    Reduced Hangar 9 B
    Beila four blade p
    3W 3W 60 reduced
    Composite-ARF Euro
    REDUCED CA Models



     



     
    RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2017.
    Terms of Service | Privacy Policy
     
    GET FREE RC CONTENT FOR YOUR WEBSITE

    Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

    Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

    Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

    Products Videos WattFlyer.com RC Classifieds

    RCU2 | 54.162.154.91 | 0 | 1 | 08:18:06 AM EST | NC