My hobby is upgrading RC's. Up for sale is my newest finished project, a used Arrma Senton 6S w/ new Bulletproof Diff Mod, new bearings all around, and a few other tweaks.
I've listed it on ebay in case that makes it easier for you http://www.ebay.ca/itm/Arrma-Senton-6S-w-Bulletproof-diff-mod-new-bearings-all-around-/263144010743?hash=item3d449af3f7:g:uVMAAOSwruhZjQMz
-In the Senton, all the bearings are new. -Bearings have been added to the steering rack to replace the stock bushings. -All 3 diffs were opened, shimmed using TeknoRC and Mugen Seiki shims. The small pins in the diff were replaced with 2.2mm High Speed Steel (HSS) drill bits cut down to the correct length. This removes excess play in the diffs making them much more heavy duty than before. -All 3 diff gaskets are new. -Front and rear 60K oil, center diff 500K oil, front and rear transmission housing has white lithium grease added. -All 4 side cage screws are upgraded to the right length, to correct for the manufacturer defect that occurs in Senton V1 and V2 models (see picture). -Wheels have been upgraded to used Proline Badlands. -Wheelnuts have been replaced with new covered ones.
-The unit has not been run after all these mods in order to keep the bearings and all other mods brand new. The body shell is a bit beat-up. But this RC is ready to one thing, and that is out-bash the competition, leave slashes in the dust, and be the last one standing!
-Comes with remote, Servo, and ESC. All you need is a 6S battery.
I’ll also be including the parts that were taken off and also extra parts:
- Original diff pins - Original wheel nuts - 4 steering bushings - Remainder of TeknoRC and Mugen seiki shims - Remainder of 2.2mm drill bits - Remainder of any new and old bearings - Remainder of 60K and 500K diff oil bottles.