If you have been flying -some- 90mm EDF or have flown --any-- 120mm size EDF jet then you are ready for this one
For a comparison; few really good 120-127mm EDF set up will provide for no more than 2 minutes flight time with the equivalent to a 44N engine, one minute at 54N after take-off and less than 30N before landing)..so you don't need more than 60N on it, although you can have a larger engine mounted in it, there is room and the frame will take the punishment.
This is probably one of the most enjoyable entry level jets if you don't have any jet experience, but it wont disappoint seasoned flyers either, it behaves as a Goldberg Tiger 60 with a .61fx nitro engine engine.
The designer indicates a flying weight if 13#, but they can easily go to 17# tank filled.
Perfect entry level or all around Sunday Flyer (if you are tired of all the stresses of scale jet flying)
Hitech metal gear servos all over the 80 inches ONE PIECE WING and steering wheel.
JR servos on the 73 inches long fuse (tail)
Electronic valve for air brakes on Intairco wheels from DreamWorks.
will split engine 7.7hrs K60G ($1100) and frame ($650 empty frame or $850 arf)
Paypal taken / no personal checks / NO TRADES
NO SHIPPING due to its size (80ws and 73 FL / 13# dry weight)