I have the following Gyro systems that I am not planning on using THIS AD IS FOR ALL 4 ! 2 ea potenza AURA 8 GYROS ( they label then as advanced flight systems)...NIB 1 ea Futaba GYA460 6-axis flight control for airplane...NIB ( the clear plastic box top is missing ) 1 ea Bavarian Demon CORTEX 3-axis gyro for R/C planes..this was mounted in a foam plane for ground testing but not used for flying
Specifications here: The Aura 8 is the an advanced flight control system for fixed wing aircraft. It Is very lightweight and compatible with all major radio brands. You no longer need to spend a fortune, nor be restricted to specific radio types to experience state of the art control.
The Aura 8 is designed to enhance the pilots experience, while not interfering with the pilots control. Your aircraft will fly as if it were bigger, and in less wind, even though it is as agile as you want it to be.
The powerful 32-bit processor makes it virtually future proof. The micro USB port makes updates easy, not complex. The firmware can even be updated as new features become available. Today, the Aura 8 offers various three axis gyro stabilization modes (and yes, you can turn it off from the transmitter if you choose), but it's new generation six axis sensor means it is ready for the future.
Features: Enhanced Stability and Control for all types of Fixed Wing Aircraft Connects easily to receivers or satellites from all major radio brands Micro USB Port allows loading model configurations, user programming, and firmware updates Custom tuning through PC 3+ Flight Modes allow precise or aggressive settings to be selected in the same flight 3 Axis Gyro modes for Precision and 3D Aerobatics 6 Axis Sensor and powerful 32-bit processor allows for continuous expansion and feature updates Lightweight and Durable plastic case Dimensions 38.2/36.5/14.5 mm or 1.5 x 1.4 x 0.6 Weight 0.5 oz Voltage 4 - 10V DC
Ports: Eight Servo Ports can be individually configured as (PWM) Inputs or Outputs Two dedicated ports for DSM® Satellites Dedicated input port for single wire digital connection via S.Bus® (Futaba®) or SRXL (JR®, Multiplex, Graupner SUMD) or analog PPM stream Supports traditional receivers via male to male 'Servo' Interconnect Leads Micro USB Port for loading model programs, user programming, and firmware updates Telemetry port for future expansion
Futaba here Features
3-axis gyro sensors and 3-axis accelerator sensors, for the ultimate in flight control. Three selectable flight modes, including Beginner mode that provides automatic horizontal level return control and flight attitude angle control. Gyro mode assists pilots learning inverted flight and aerobatics, while Gyro Off mode puts flyers in complete control. Separate sensitivity adjustments for aileron, elevator and rudder. Easy to set up, and S.Bus compatible. A low profile design, compact in size and light in weight. For electric models only. Beginner Mode Suitable for training Fuselage flight attitude angle is limited to approximately 80° Automatic horizontal level control returns the model to a level state Gyro Mode Suitable for inverted flight and aerobatics Gyro Off Mode Model is not controlled by the gyro
Specs: FUTM0790 Gyro Sensor: MEMS vibrating structure gyro Operating Voltage: DC 4.0~8.4V Current Drain: 44mA Temperature Range: 14°~113°F (-10°~+45°C) Dimensions: 1.37 x 1.06 x 0.47 in (35 x 27 x 12 mm) Weight: 0.35 oz (10 g)
Demon here The CORTEX 3-Axis Aircraft Gyro Stabilization System, by Bavarian DEMON Download the CORTEX Gyro Manual Here
Features Easy to Run: simply connect your current radio system No PC necessary Supports: 2 ailerons, 2 elevators, 1 rudder Supports various receiver systems: S.Bus (receipt), Spektrum/JR satellites (up to 2 sats), Jeti-/PWM-/PPM sum signal, Conventional receivers Software and firmware updates via web The 3-Axis CORTEX Gyro: Power for everything. And for each type of RC airplane. Ground-breaking 3-axis stabilization system. Gyro CORTEX has a high-quality, is reliable and universal. Whether a Parkflyer, 3D Acro model or turbine jet, this gyro fits every RC aircraft. 100% reliable sensors. The latest soft-ware algorithms. Everything in more remarkably small and CNC-milled aluminium housing. Together, these fea-tures bring the gyro to a whole new level. And they will do the same for your RC airplane. Whatever you do, you will notice the difference - your remote controlled airplane is in the air, starting and landing work per-fectly and strong or gusty winds are no longer a problem. Immediately 'Ready to Run'. Simply read in existing signals and take flight. The Cortex does not require any PC or additional software settings - unless it is desired. You do not want to wait too long and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier. Compatible. Universal. Strong. The versatility leaves nothing to be desired. The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed in the Internet at any time. Scope of delivery & gadgets. Greatest possible flying satisfaction - without worries. Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on carefree. The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads and exclusive design and information material.
Specifications Dimensions: 36 x 34 x 14 mm Supply voltage: 4-10 V (2S-LiPo-compatible, min. 5.5V using Spektrum/JR satellites) Max. roll & pitch rotational speed: 500°/s Max. tail rotational speed: 650°/s (typical) Servo frame rate: 55Hz / 220Hz selectable Tail servo output: 1.520µs / 760µs selectable Maximum servo currents: Total 10A (continuous load) Weight: approx. 18g (without cable loom) Length of connecting cables to receiver: 90 mm