This KingTech K-180G is new-in-box with zero time. It's the G model with a Xicoy ECU, kero start, with start and fuel valves built into the case. Same engine specs and performance as the G2, but with a different ECU. It was bolted into a jet, but removed and put back in the original box when plans changed...having never been started.
Optional accessories included in this sale: - 2100mAh LiFe ECU battery ($72) - FOD screen ($30) - NIB Pilot 240ml air trap ($95)
The G2 version sells for $2690 without any of the accessories included in this sale - but the engine is currently backordered.
From the manufacturer: KingTech G series, a true Fuel Start turbine, will start and run on Diesel, Kerosene and Jet-A. G series have both solenoid valves built into the front cover, with a single fuel feed that eliminates at least 8 fuel connections upstream to the turbine, making a clean engine install a very simple task.
KingTech K-180 G turbine engine specifications:
Diameter: 114mm ( 4-1/2? ) Weight: 1724g ( 3 lb. 12oz. ) RPM Range: 33,000 – 123,000 RPM Thrust: 18 kg @ 123,000 RPM ( 40 lbs @ 123,000 RPM ) Exhaust gas temp.: 550° C-720° C ( 1022° F – 1328° F ) Fuel consumption: 545g / min ( 19.22 oz / min ) <~change Fuel: Diesel, Jet A1, Kerosene Lubrication: 5%, 3 to 5% for Diesel Maintenance cycle: 25 hours