Up for sale: HSD SUPER VIPER 105mm EDF. I purchased this bird as a kit and added all the electronics myself. The power system is a Changesun 105mm 12S, with a Phoenix Edge HV 160 ESC. The ailerons, elevators, rudder and flaps, have Turnigy 113MG or HobbyWing MG servos. It also comes with the electric brake control, gear retract control, upgraded wing (the original ones are junk) plugs and the HSD Master Flight Conteol box. With this bird, comes a wing bag, extra right wing and vertical stabilizer. The original ones came out of the box with some damage, but not enough to get rid of. There is also a CastleCreations Safety Switch included. The bird only needs a receiver, Lipo and (optional) flight stabilizer and she's ready to turn n burn. I have 2 others (1 Turbine, 1 105 mm EDF) and I,can tell you, the 12S setup will thrill you. Please let me know if you have any questions and thanks for looking.
PRICE REDUCED!!!! The first $725.00 Takes her Home. LETS MAKE A DEAL TODAY!
MAKE ME AN OFFER & Lets TALK...
SPECIFICATIONS: Wingspan 1500mm (59.1in) Length 1663mm (65.5in) Flying Weight 5kg (11 lb) Wing area 34.28 dm2 Wing load 145.9 g/dm2 EDF diameter 105mm 12-blade Power System 4258-700KV brushless Outrunner Motor Electronic Speed Control 160A UBEC 6A Cruising speed 180 km/h Flying time 4 mins (full throttle) Painting surface treatment Low gloss CG (Center of Gravity) 170mm from the leading edge of the Main Wing Landing Gears Metal electric retractable hydraulic landing gear×3 Radio System 6 channel (required & not included) Power Battery 12S 44.4V 5000mAh LiPo with AS150 type connector(required & not included) Receiver Battery 2S 7.4V 1800~2200mAh LiPo with 2PDu-Pont type connector(required & not included) Battery Charger 6S×2 LiPo battery charger (required & not included) Ailerons Yes Elevator Yes Rudder Yes Flaps Yes Candrd No Lights Yes Hinge Type Nylon hinges Material EPO foam Skill Level Intermediate Build Time 1~2 hours