This turbine was sent in to dreamworksrc for a full service and they replaced seals and new bearings as well as a fuel pump. when I recieved it back I put it on my test stand and fired it up, she ran like a champ. I put it back in the box and haven't used it since. Comes with everything to run the turbine except the 7.2V lipoly battery. Also this is a gas start turbine.
Specifications: Nominal thrust: Typ. 180N (40lb) at 120.000 RPM Idle thrust: 7N (1.5lb) Idle RPM: 32,000 Diameter: 111mm (4.3) Engine weight: 1,870g (4lb) . Including leads and mounting strap. Installed weight: 2,050g (4,5lb) including ecu, pump, valves and tubes. Fuel: Kerosene + 4% oil (synthetic 2T motorcycle oil or turbine oil). Fuel consumption at 160N: 440g/min Pressure ratio: 3.1 to 1 EGT max: 650ºC Massflow: 380g/sec