heres your chance to get one of these have a big plane coming so theses small ones 1/4 scale have to go Specifications Specification Description Specification Description Wing Span 72 Control Horns Aluminum Length 62 Canopy APC Clear Wing Area 1480 sq. in. Wheel Pants Fiberglass Weight 12-14 lbs Wheels Rubber Engine 1.2-2.4 Gas or Glow Push Rod Wire & Wood Covering Oracover (Ultracote) Hardware Included Radio 4 Channels, 6 Servos Servo Tray Included Cowl One Piece Pre-Colored Fiberglass Fuel Tank 550cc Motor Mount Not Included Landing Gear Aluminum Jimmy Franklin and his modified 1937 UPF-7 Waco bring the crowds to there feet at every air show he attends. The Super Kraft 1/5th standoff scale version of his plane will do the same at your field. Beautiful on the ground and breathtaking in the air, this balsa and ply airframe comes expertly covered in Jimmy's scale red and silver trim scheme. The fiberglass cowl, wheel pants, struts, and sturdy aluminum landing gear come pre-painted in matching colors. The two-piece fully symmetrical, aluminum spar, 72-inch top wing and 64-inch bottom wing deliver 1,480 square inches of lift, while four ailerons add to the incredible roll rate. The 62-inch long fuselage and oversize tail feathers produce control other models can only dream of. With a weight range of 12-14 pounds and an average wing loading of only 20 ounces per square foot it will perform on engines from 1.2 glow engines to 2.4 gas. Fly the Super Kraft Waco and put on a little show of your own.