| Item Details |
| Readiness: | RTF 
|
| Condition: | New in Box
|
| Why Selling: | North / South American Importer |
| |
| Willing to Trade: | No |
Item Description:
This is the evoJet 180Vx engine. Currently in use by RC Pilots and Governments around the world.
evoJet B180vx - the powerhouse for all large jet-models up to 55+ lbs takeoff weight. The evoJet VX series of model turbines works in a similar fashion to full size jet aircraft power plants. The engine features an electric starter motor and electric kerosine burner (SFL12V), providing full control over the engine start up from the transmitter. Propane gas is no longer needed.
First major manufacturer with internal kero
First major manufacturer with single fuel line system
First major manufacturer with no external sensors (temp probe)
First major manufacturer to use on-board computer chip to make ECU and fuel pump replacements a snap!
Powerful 12V (3s Lipo or 4S A123) engine system, not a high-amp draw 6v (2S Lipo) system.
A123 ready right from the factory
New turbine-rotor with certified wheels, compressor wheel 5-axis machined of 2618A.
Engine sensors fully integrated and therefore best protected.
Precision balanced rotor for best running performance and ceramic-hybrid bearings.
Mini JETRONIC-Vx ECU - extra lightweight and with powerful firmware.
All components with full evoJet-warranty.
Technical specification:
Thrust: typ.18 kg / 40lb @ 124,000
Weight bare: 1660 g = 3.7 lb
Diameter: 112 mm = 4.4 inches
Rev speed: 30,000 - 124,000 rpm
Exhaust gas temperature: 650°C - 780° C
Fuel: 580g / 18.4oz per min Jet A1
Lubrication: 5% turbine oil in fuel
Maintenance interval: typ.2 years / 120.000.000 revolutions / 25 h
Pack contents
B180vx jet engine with starting devices, JETRONIC-Vx ECU, EDT display and programming unit, precision fuel pump, magnetic fuel valve, fuel tubing, lithium-manganese battery, fueltank clunk pick-up, cable set, mounting clamp, operating instructions.
evoJet has led the charge with turbine engine improvements. We believe we offer the most technologically advanced engine in both quality, machining, and electronics.
This low price of only $4199 is a cash/check only price. Please add 3% for PayPal or Credit Card.
If you have any questions, feel free to contact me personally any time.
Chad Russell
702.521.8010
|
|
Sign in to Make Offer
