Hi my name is brandonn im selling my sky-master f-18c super hornet/jolly roger special edition i took this jet on a trade for a car so dont know much other than the following this is not a scam i just want to be honest about it and the situation first off the jet it is a sky masters f-18/c pro-modelfull painted and to scale just comes with all servos installed ready to go servos include hi-tech-5645x2 futaba-s9650x2 futaba-s9152x2 jr-hs8711x2 cockpit is full detailed and all hand paint to scale it does have full scale landing gear and brakes( I dont have the retract door package sorry never received it IF its a deal breaker i can try to get them or reflect it in the price)! THis is already built and near ready to go needs little odd and end stuff IE.battery,fuel,ect his jet has only been flown 1 time and never crashed or hard landed Next for the turbine The turbine engine is a jet central rhino turbine this engine is gas start at the moment and can be converted over to kero very cheap from jet central !!!!!!!!!!!!!!!READ!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! this engine comes with a lifetime warranty BUT YOU HAVE TO PAY A 250 WARRANTY TRANSFER FEE!!!! I called them today and im the 1st owner of the motor and has recently been fully rebuilt!!!!! i have serial number but email me and ill send it too you This motor currently has no hours on it and only has been bench tested HEre is run down on the motor pecifications: Thrust: 16 Kg (36 Lbs) @ 118,000 RPM Idle Thrust: 0.59 Kg (1.3 Lbs) Weight: 1.970 Kg (4 Lbs 5.4 oz), including starter Diameter: 110 mm (4.3 inches) Length: 300 mm (11.8 inches), with starter RPM Range: 30,000 - 118,000 RPM Exhaust Gas Temperature: 650°C Fuel Consumption: 0.52 Lt/min (14.5 Oz/min. avg.) Fuel Types: Jet A1, 1-K kerosene, Lubrication: 2.5% Synthetic 2T Motorcycle or Turbine Oil mixed in the fuel Maintenance Interval: 25 hours RHINO Turbine Complete Set with Auto Start
SOrry but this is as far as i know about it!!!!!!!!!!!!!! But would be more than happy if i could meet anyone or talk to anyone over the phone about it and explain what i know about it!!!! And yes i am a new member im not a scammer or do i have any-thoughts about scamming anyone im asking 5500 or best offer this may be a fair price or not but im open to offers i have 100s of pictures of it and can try to answer any questions of it you may have i live in fort bragg nc and always wanting to learn from people about the hobby so if you live in the area please fill free to call me 816-394-0993
Last login: 12/17/2012 4:32:PM
Location: NC, USA
i will release that info if i get someone that really wants it i just dont want to release anyones info if you understand where im coming from and the scrapes are from pulling it in and out of my suv its plack marks from where it rubs in my suv and he flew it in va
Last login: 10/23/2014 9:08:PM
Location: CA, USA
You say in your add that you have no clue about the hobby and that you are the first owner of the turbine, and it was just fully rebuilt ???? What happened to the motor that it had to be fully rebuilt ????