This is a pass along project. Quality of work is pretty good all things considered that it's moved on owner to owner. I have the airframe shown as is. Wings are not sheeted. 2 sets of booms,one set sheeted, 1 set framed up. Center section missing flap segments. I have a spare kit to fill in missing pieces. Tail is done but not to true scale. Needs trailing edging to overhang flight control surfaces. . Most of this minor work. Have all the ABS plastic parts. 3 cowlings, 2 clean nonhacked, 1 I hacked to fit the engine. 1 fiberglass noses, 1set of windows,They are little scuffed,possible polish out.Robart gear is new old stock. Sitting on a shelf light corrosion where lacquer was worn off. Skylight 7 inch mains, Dubro 4.5 for the front. 1 set of cut plans so they fit your building table. 2 new old stock Brisson 3.2 engines with starters. They have been started to see if the starters worked. Fired up with a 3S LIPO. Otherwise never flown. Missing are the exhausts. I was trying to run the exhaust up the cowling to dump out the wing like the 1:1 scale airplane. Cylinders are reversed so the carbs both face inward. Can't think of anything else. Let's face it, if your taking on a project like this,be prepared to spend some time on finishing it. My car has been sitting for 2 years and has gone nowhere. Time to move on. If you don't want the engines, airframe and kit (for spares) and gear are 800.00. Price with engines is 1600. Shipping is Greyhound for 100 more. Please note if you want to talk about this project send me a P>M> Don't care for my phone # out in public Thanks for looking
Sign in to Make Offer
