Ok guys, this is something a little different. I started with a Seagull Spacewalker II 1.20 size plane which I got brand new and put together.
I modified the cockpit to make it a single seater with a headrest vs. the two seater. I make an aluminum dash with gauges. I installed two nacels that are set up for electric motors.
I parted out the motors, ESC's, etc. so this sale is for the airframe which includes landing gear, air filled "tundra" type tires, and tailwheel. I have left all the pushrods, etc. in place.
If you want to remove the nacels and put a single gas, electric, or nitro motor up front, the cowl is un cut. I ran the plane on two Power 60's and two 5 or 6 cell 5000 MaH batts. I also had a seperate flight pack.
Must be local sale. Shipping would be as much as the cost of the plane.