-75% Completed Kit Build, almost ready to Glass -New and Installed Robart Main Gear -New and installed Scale Sierra Tailwheel assembly -Canopy -Cowl -Hitec 5645 Servo (Installed Custom setup for Rudder and Tailwheel steering) -Installed Wing Tubes (3 piece wing) -Solartex covered Rudder
YOU WILL NEEED TO SUPPLY YOUR OWN FINAL OUTER WING PANEL SHEETING AND PLYWOOD SUPPLIES FOR DIVE BRAKES AND FLAPS.
I have about 100 build pics if you want to see anything specific. This is a very clean, straight and solid build so far!
Completed: Fuse and Tail feather's, firewall mounted, Center Section and Fairings done and fitted, Main Gear installed and wheel bays cut out. Outer wing panels built, fitted and wing tubes fitted and installed.
Remaining work: Cover Elevators, finish outer wing panel sheeting from Main Spar back to TE on top and bottom, Make Ailerons, Dive Brakes and Flaps, Cover Elevators, finish cockpit area, final sand a ready for Glassing.
Stock Specifications: (These are manufacturer specs and may not necessarily reflect the specs of the item for sale)
Last login: 11/27/2015 9:20:PM
Location: KY, USA
These pictures do not give an accurate representation of this plane! I have personally seen this and it is drop dead gorgeous. The quality of work is awesome. Sorry to see this go, but good luck with the sale.