KI-84 Frank by Wayne Seiwert for sale. Model is 1/5 scale and has a wingspan of 92 iches. The fuselage and wing are carbon fiber with panel lines and screws molded in the silver gelcoat. The model comes with a Zenoah G-62 engine installed with servo attached and dummy engine in the cowl. Airplane comes with 1 scale flying and one carbon fiber static spinner with machined tip screw. The airplane comes with retracts installed with 5 inch wheels. Fiberglass outer doors are installed as well as the aluminum inner doors. The inner doors are controlled by installed air rams and the controls are provided by an ultra precision valve all plumbed in with no additional work required. The wing is one piece with the ailerons and aluminum flaps installed with Robart removable hinges. JR high end servos installed on the ailerons and flaps. Functional landing lights installed with arming switch that activates the light when the gear goes down. Airplane has functional hatch that hides the fuel fill dot, switch, charge jack and air filler valve. Instrument panel is installed along with a fixed canopy. An extra canopy is provided if you want to install a working canopy. Giant scale servos on the elevator and rudder and a standard servo o the tail wheel. The elevators and rudder are installed with Robart removable hinges. The model only needs to be final finished and radio gear installed. Not much left to do unless you would like to add more scale detail. I will crate and ship anywhere in North America at buyers expense.