P-40 plan built from Jerry Bates plans at 1 to 5.5 scale putting it at 82 inch wingspan. Moki 1.8 with Gene Barton scale spinner, glassed and sprayed with latex paint, all markings are masked and sprayed then sealed with matte war Bird colors catalysed clear coat for fuel proofing. scale hinging with Century Jet mains and Robart tail wheel. Dual air bottles for extra capacity with air line restrictors for controlled retraction. Full cockpit detail and approriate pilot in place. Ready to fly weight 20 pounds even and balanced right on the plans indicated point with no additional weight needed. Has not been flown to date. Working on several other projects and never seem to get around to getting this in the air so it should go to someone more interested. Have over $1500 invested but will entertain offers closer to $1200 with pick up or meet within a reasonable distance of Northern NJ. Will also be at Lebanon in March.
Last login: 11/28/2015 10:06:AM
Location: NJ, USA
The Moki is a glow engine that i had from another project, I replaced the bearings and piston /ring. Since then it has been run once this past summer as a tuning. It currently has a JR reciever on the ham band with all new Futaba servos on the flying surfaces and a metal gear on the tail wheel retract since it is mechanical. I go to Rome NY about every 2 months so yes I am going North on 87 and occasionaly 81