I'm selling a partially built Fly Eagle Jet F-18 1/6 Twin (can also be setup for a single large turbine). I have lost interest in completing this jet and have decided to stick to sports jets most for easy of maintenance.
Here is a video of My Jet:
There was some slight shipping damage but I have fixed it by west systems epoxy and carbon fiber, its now very strong. I will include all 4 colors of touch up paint should you need to touch up anything.
This is is version 3 of the jet, it DOES NOT HAVE HONEY COMB FORMER/RIBS for the elevators, instead they are 3 plywood rail ribs with a teflon block. It does not use the aluminum tray.
Dual Carbon Bypasses are included, however, the jet does not have full ducting from the intake to the turbines so I would suggest probably just using the bottom parts.
I can include 8x7980 Servos that I was planning on using on this plane, they are already installed on both ailerons and the flaps the remaining 4 are in the case, if you would like all 8 servos please add $1000.00 otherwise I can use them on my other jets. If not I'll take the servos out of the wings.
I will also include a hydraulic conversion kit for the retracts, you'll need this to make sure you can cycle the gear.
A full light kit with new controller is included, looks really nice and also has a custom cover for the ailerons.
This version does NOT have slats, people that have flown it said that SLATS are useless on it so I ordered the version without SLATS.
The plane seems nice and strong I have seen it Fly in Houston, this was version 2 with the honey comb elevator ribs:
Have about $6,500.00 in it with all the upgrades, Asking $5,300.00
I can ship insured in a wood crate to almost any freight carrier terminal Shipping cost crated are $275.00
Ohh the jet has a weathered paint job from the factory & Elevators are counter balanced already for you.