Kits are available to fit almost all size Mustangs from 1/7 scale up to 1/4 scale ... see the bottom of this ad.
These exhaust manifold kits will make your Mustang stand out above all the rest as no other single accessory will. The Mustang's exhaust system is one of its most distinctive features, but it's very hard to make look realistic. With one of these kits on your Mustang they will look right because they are right.
Developed from accurate scale sources, each exhaust set is as close to scale as possible. Each stack is spaced exactly and at the correct angles rearward and downward. There is small precision relief around the base of each exhaust stack that creates the illusion that the shroud is sheet metal. All this is built into the cast shrouds along with stops to automatically set the correct depth for the pre-cut brass exhaust stacks.
You'll have to paint exhaust streaking on the fuselage however - this non-functional exhaust system just looks real.
These exhaust kits can be installed either during construction or after your Mustang is finished. Attached to the surface of the cowl, the manifolds normally won't interfere with the mounting of the cowl or with your engine installation. With some modifications they can be mounted from inside the cowl for additional realism. If you want, the base of the exhaust stacks can be opened into glass cowls to vent additional cooling air from the engine compartment. They are also light – the Top Flite GS Mustang surface mount kit adds approximately 2 ozs (total) vs the vacuum formed kit parts.
Each kit includes everything needed for installation including a pair of cast resin shrouds (bases), brass exhaust stacks pre-cut to length, comprehensive illustrated instructions, alignment jigs, material used for forming the bands on the tips of the exhaust stacks - even a tool for masking the exhaust stacks for painting. Assembly and installation is straight forward and fully explained in the instructions, leaving you time to spend time painting them as realistically as you want.
KITS ARE AVAILABLE FOR:
1/7 Scale - $35 incl Priority Mail postage Top Flite 60 Mustang kit- (also fits Hangar 9 - 60 and many other similar scale ARF's)
1/6 Scale - $40 incl Priority Mail postage Brian Taylor 69" Mustang and others
1/5 Scale - $40 incl Priority Mail postage. Top Flite GS Mustang - all w/ glass cowl. This kit also fits the Gold Series kits with the balsa top cowl. The shrouds can be surface mounted or mounted from inside the cowl (inside mounting requires modifications to the front fuselage sides and is not possible with all kits). Modified versions are available to fit the Century Jet Models, 1/5 scale Platt / Pica, 1/6 scale Hangar 9 '150' and Aerotech 1/5 scale kits. This kit will also adapt very well to other 1/5 scale kits such as Byron, and World Models – PM me for information.
1/4.5 Scale - $45 including Priority Mail postage. Ziroli 1/4 Scale Mustang. Also Nosen and Nosen (not).
1/4.4 Scale Fiber Classics / Comp ARF - $50 incl shipping (PM me before ordering please)
1/4 Scale - $55 incl Priority Mail postage fits full ¼ scale Mustangs (see http://www.pacific-scaled-aircraft.com/1-4_scale_manifold_kits. to specify how the fairing base should be trimmed.)
I have kits installed on many other Mustang kits. If you have a kit not listed above, please contact me…it's quite possible there is a kit that has been or can be fitted.
PayPal or money order only. Outside US contact me for the additional shipping charges (I charge only the actual postage cost rounded to the next dollar).
When ordering please specify exactly which Mustang kit and the cowl that the manifolds will be used on.
Questions? PM me.
Tony Howard Pacific Scaled Aircraft
Photo Credits ... City of Vancouver (1/5 scale Century Jet Models) photo courtesy Sean McHale Full scale Mustang photo courtesy Ken "Polar Bear Campbell Prudence 7th (Ziroli) photo courtesy Matt Lupri Evie Pie (Hangar9 60 ARF) photo courtesy Mike Day Shangri-La (1/4 scale Fan Fly) photo courtesy Jess Hogan Ferenzi (Top Flite GS) photo courtesy Rich Casteline