This is a complete landing gear set for the Composite ARF Ultra Lightning, can also be used on the original lightning. The strut lentghs for the main are 170mm and the nose is about 140mm, the mains will also work on a Priotti Tuono (nose should work too with some small mods).
The struts are all Dreamworks pro-links for the mains and the nose, the mains are 4.25 Carf Intarico wheels with brakes. The nose is wheel is also by Intarico.
The struts, wheels, brakes, up3, axels, trunions, brake valve and air lines are all brand new and have 0 use on them. The Behotec C-50 retracts do have some use on them but they are in excellent condition (I had some glue on them so I sanded the glue down hence the weathering on the retract body. 4 colored arilines in 3mm diameter and 16 feet in length are included as well as 12 feet of clear 3mm tubing for the brakes. I was planning on using this kit on another plane, until I found that that required much longer struts. Rather than try to modify them I am selling the kit as a whole ready to install inside a UL or Classic Lightning, or even a Pirotti Tuono.
Shipping insured in mainland USA is about $15.00 via fedex ground.