This is a Skymaster 1/6th scale F-16 in the tigermeet scheme. The Skymaster F-16 is probably the most well known of all scale jets, and pretty much anyone that flies jets will have eventually get an F-16, hence that is why I got one too.
Anyway, the Jet is about 3 years old and is in pretty good shape. NO major crashes or repairs, however, I have done some cosmetic maintenance and small repairs (scrapes and what not) here and there, but for the most part the jet is in fly ready condition. Overall a solid 7/10
HERE IS A VIDEO OF THE JET (this is the SAME JET that is in the video, a RCUNIVERSE STAR !
This has the BVM upgrades installed and also includes BVM vavles, smooth stop and BVM main air valve. Servos are all High End JR servos:
8611A on Ailerons & Rudder 8711 on elevators.
The servos were just serviced from Horizon hobby, I have re-installed the ailerons and rudder, but the elevators need to be installed. ALl servos have metal arms
Jet includes the Carbon Fiber Full bypass and Upgraded Kevlar fuel tanks. a BVM Ultimate Air Trap is also included. Brand new set of tires have been installed on the mains, also included is the nose tire but currently the nose wheel has a good bit of tread left so you don't need to replace it just yet. The jet was originally powered by a P-160 Jetcat, the pipe inlcuded will handle up to a 170N turbine, for larger turbines you'll need to get the skmaster big pipe.
A Details4Scale Pro light kit has been installed and I'll also include a 2500mah LIFE battery that works great with it. This light kit makes the jet really pop during late evening flights or early morning flights when the sun isn't at full force.
1/6th pilot installed in the skymaster F-16 cockpit, the light controller has output options for cockpit lights so should you decide, you can add small green LEDs in the cockpit as well.
Local pickup is preferred, but I have shipped out jets before so no problem on shipping them out, the shipping will be about $250-325 insured to a freight carrier.
NOTE: in the pictures the tail cone is not installed, I simply took it off. I also have the missle rails for the wings they are included as well and simply aren't in the picture. Also the fins have been removed but can easily be reattached, I held mine in place with zap-a-dap goo and they worked great. I have removed them to make it easier to ship.