Deal fell through (buyer disappeared and didn't return calls) so she's being relisted.
From CARF, we have the 2.1M Extra 300 with only 15 flights and in great condition. Includes the following:
CARF 2.1 Airframe - $300
DA50 on MTW canister/header - $500
CF Mejzlik 22x8 prop - $30
Titanium turnbuckles/HD connectors - $10
Standard Switch on Ignition - $5
Tru-Turn Alum spinner - $25
CARF stab and rudder bag - $5
RC Excel Ignition Kill with LED light - $15
Graph Tech CF Gear - $40
DA fuel dot - $10
Throttle Servo - $15
Needs igniton and Rx batteries, receiver, and Rx switch (Wolverine was installed). Best part about this plane is the the RTF weight of 14lbs 10 oz. This DA doesn't skip a beat, doesn't hesitate, doesn't burble, doesn't do anything other than pull this plane out of the vertical like there is no tomorrow. Running on Redline at 50:1 and consistently starts on the first flip. Takeoff in 10 feet and land in 50 feet. Harriers, hovers, knife edge (does tuck towards the gear), spins, snaps, blenders,.......this planes does it all and looks good doing it. All switches are inside so nothing but a clean, in-the-mold paint job on the outside (no wrinkles in the sun...lol). Slows down very well for landing, in fact, shoot the approach with a little throttle and spot land every time. Upgraded to a one piece Graph Tech CF gear providing extra height for larger prop clearance. VERY CLEAN. Fuselage does have two hairline "paint cracks" on lower portion as it begins to curve to the underside about mid-way down. Not sure how that happened but it is surface only and has been reinforced for good measure.
Looking for pickup or drive to meet a short distance. Airframe sells for over $800 from CARF normally. You can get this one for $800 and everything else is free. Can leave in all the Hitec 5955 servos with SWB arms for an addtional $350. Come take a look, you won't be disappointed. Any other questions, just ask.