Thinning the fleet.
Price shown is for Airframe only.
Willing to Trade:
"ULTRA LIGHT" Hangar 9 260
(AirFrame Only Price $900.00 or Ready to Fly less rec. and batteries $2,200.00)
Started life at a 100cc Hangar 9 260 then went on a diet. Plane will come with two sets of wings. The first is stock no changes other than the scheme change. The other set went on a diet. Wing had all plywood removed and Durant system installed in wing changing wing from two servos to one per side. The ailerons where lightened and a carbon fiber tube run in them to stiffen them back up.
Fuse was left stock other than scheme change to the new Toyota scheme. Fuse was new in box and removed and redone like you see. "NO DAMAGE HISTORY OR REPAIRS "the landing gear changed to carbon fiber and wheels are Airman Wheels with titanium axles. Hatch was cut and lightened and pilot was left out. Motor is a Custom DA-100L (SUPER LIGHT) I had the motor cylinders saved as DA does to the DA-200 and removed 6 oz. making it lighter than the DA-120.
Plane is in pristine condition and comes in just under 24lb. ready to fly (less fuel) with light wings and one A123 battery in plane. If you want to go fast and do IMAC or turn and burn fly it with the two batteries and the stock wing and plane is back to factory but still a light plane due to coke bottle fuel tank and carbon landing gear and hatch cover lightened.
This is what you will get with plane.
Hangar 9 260 100cc plane with two complete sets of wings and wing bags. One Revoc custom set and one Aeroworks set and ready to fly on the plane (no transmitter program change to fly either wing and still in trim) One wing has two Hitec HS 7950 and the other has four Hitec HS 5645
All the rest of servos in the Fuse are Hitec HS-7950s
Super Light DA-100L (light cyl.)
Coke bottle fuel tank
Fiber optic kill
Hangar 9 fuller
Airman wheels and titanium axles
I will be pulling the reciever and Fromeco A123 batteries from the plane shown in the pictures at sale.
I have had several of the Hangar 9 260 thru. The years and this one is one I truly went all out to take one plane to the field that would IMAC great and 3D great and have enjoyed this plane for 2 years but thinning the fleet as I have new plane on the horizon.
Thanks for looking and hope you have a Happy New Year.
Stock Specifications: (These are manufacturer specs and may not necessarily reflect the specs of the item for sale)
Last login: 12/20/2014 8:36:PM
Location: TX, USA
Yes I did fly this plane at Waco last year and had a great time with you guys. I do not have any spare servos but the ones I have in this plane if I sell the airframe first I would have some servos. The Hangar 9 260 has been my personal beat flying plane for years now.
Last login: 12/20/2014 11:45:AM
Location: N/A, UNITED KINGDOM
Do you have an idea of what it would cost me to get this plane delivered to an address in Miami? I am flying out there for a jet event in a couple of weeks and would love to have this plane for a bit of fun before the event. regards Al