RCUniverse Classified Ad Market Archive

Showing Listings No. 4801-5100 of 20000

   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67 
 
Kingtech K-60 G1 Turbine Engine
This item for sale is a Kingtech K-60 G1 Turbine Engine with 655 minutes of runtime. The engine is complete with all operating accessories, including Kingtech FOD screen and ECU battery. This turbine

extra 260
this is a 35% Extra 260 ARF-QB aircraft with a Da 100 engine with std. mufflers. 4'~| alu. spinner with 28x10 carbon fiber prop. Has Hitec servos 5645 on ever thing with a 7955 on the rudder. has a el

TURBINE CERAMIC BEARING SET.
Turbine ceramic bearings set .Contact angular type. Size-8x22x7mm (608)

Jemco Master Scale SBD 5 Douglas Dauntless Kit
Wingspan 64 inches. Recommended engine size .60-.90 2 stroke 4-8 channels Weight of 9-12 lbs Kit contains: Five piece canopy each section molded separate for exact scale, flaps and dive brakes ha

Great Planes P-6E Hawk ARF EP $200
Discontinued Electrifly P-6E Hawk. Hard to find. $200 plus shipping SPECIFICATIONS Stock Number: GPMA1164 Wingspan: 43.5 in (1105 mm) Wing Area: 352 in² (22.7 dm²) Weight: 3.75-4.5 lb (1.70-2.

J&J Truoblemaker ,Tony Bonetti designed pattern ship $250
Long out of production pattern kit from early 70's,kit is complete and unstarted,has supplement sheet for installing Rhom air retracts,pans a re yellowed and brittle from age as these were blueprints.

Kits For Sale NIB
All Kits Are new in the box unstarted unless noted,prices listed are the selling prices,lowball offers will be ignored. Due to varied work schedule most things are shipped on Saturday morning .All m

BVM Ultra Bandit - LG Parts
I am selling Langing gear parts for an UltraBandit. One nose gear retract unit. One main gear retract unit with main strut and wheel hub. All in very good condition.

JR 12X
JR 12x Transmitter in good condition. Includes JR original Charger. Does not include battery.

Quadra 35cc Gasoline RC Engine w/Spring Starter & Muffler - Free Shipping
Quadra 35cc Engine with Spring Starter & Muffler. Nice, clean engine with smooth bearings and strong compression. One of a "lot" of several engines recently purchased. Engine looks ver

Saito FA-150S
Engine was used 3 years and then retired. I don't have plans in using it and rather sell it than watching it getting older. Was used in a 1/4 scale biplane and this engine is a monster powerhouse. Ha

Dietrich Performance Aircraft Extra 260 50cc


FMS 1500mm P-47D PNP
This is a really nice flyer. It does need a one new retract as it burned out , But it has had new retracts, struts , gear doors put on it , Everything else works 100%. . It does have hanger rash and o

Freewing 1410mm P-51 Old Crow PNP
Got this from a friend , It had one bad landing as shown in last pic. Not really a big deal, easy fix It has all new struts and retracts, New prop , New gear doors . It does have hanger rash but want

World Models Ultimate 27%
World Models 27% Ultimate with YS 1.40L four stroke. Less than 40 flights includes servos, A123 battery, Xtreme Power Systems receiver, Fromeco Badger switch. Will deliver within 100 miles +/-.

BVM F-4 Phantom
Selling my complete custom BVM F-Phantom ready to fly minus turbine and receiver: Fully customer and programmable lighting system Hard to find and get BVM air actuated extending front Navy strut

JR DS8411
I have 4 JR 8411 servos that were only used for one season that are in very good condition. Each of the 4 servos has a SWB 1.5 inch arm attached to it that goes with each servo. Additionally, 2 of the

Taranis Qx7 Transmitter Green Version with 2 Rxs
I have a pretty much new transmitter, I did add a sd card to it and added models but only flew one airplane on it. I really like this radio but its still a little to much for the little flying I do. J

Freewing Avanti S 80mm
Wingspan: 48.7in. / length: 51.2 in. /1850kv motor/ 80mm 12 blade edf / 100A esc / 5a UBEC / 9g digital metal servos (8 pcs) / 6 cell 4500-5000 mah (not included) / metal retracts / lights / 115 mph /

Ziroli Bob Downey's Ole Tiger
Beautifully built, 42 percent Cassat ole tiger. All flying surfaces are beautifully hinged with servos in the wings. Brand new DA 60 under the hood, spinner, prop, cowl all mounted. Hard work all done

35% H9 extra 300
H9 35% EXTRA 300 great condition, no crashes, etc.. I have no time for hobby, one of my favorite airframes. Airframe only with B&E graphics and no limit white spinner(drilled for da120, spinner not

JMD Models Luscombe Silvaire kit
JMD Models Luscombe Silvaire Kit New in box 105 inch wing span, 1200 sq. inches engine, G38 or equevalent

Spektrum DX7 and JR 9303
I have a DSM2 DX7 for sale that has very little use and stored insde all year long. I would like to get 120.00 for it. I also have a JR 9303 that is for sale. It has a new battey and is in great shap

Top Flite F4U Corsair Model Kit .60-80,60"
Open Box. Rudder and stabilizer frame assembled. All other parts untouched. Includes new in original package: 12oz fuel tank, fueling valve, 3' of fuel line, replica radial engine and cockpit kit. Pay

E-flite Blade 200 srX - BNF - Free Shipping
E-flite Blade 200 srX Helicopter in excellent condition. This ad is for helicopter and one 800mAh flight battery only. No carrying box, manual, tools, etc. Asking $60.00 shipped to the continental

Robart 100 degree rotating air mains complete set
This is a complete set for 1/8 scale model Corsair, Mustang etc. Set includes: 180 degree rotating mains, scale retract for tail wheel, air control kit, 3 1/4~| main wheels, tail wheel, air line restr

Traxxas


Parkzone se5a


Pica spit Brison 50cc. Will trade for p51 arf or?
Servos r hitec 645 on flaps and alerions and on elv halfs will sell rtf for 550.has Robart air retracts THE WAY PLANE IS RTF RITE NOW HAVE NOT TOUCHED IT WOULD RATHER SELL RTF thanks NO SHIPPING

Tower Hobbies Millennium Master PNP
Wingspan is 41~|. Great flying plane! Has some minor scrapes. Just add receiver and battery. Local pick up only. Price is firm! It has an Orange DSM2 Receiver with stabilization that I will include fo

Hobby People Waco Biplane PNP
This is a Hobby People Waco biplane. Price includes motor, ESC, and servos. It has an Orange DSM2 receiver with stabilization that I will include for an extra $20.00. Wingspan is 39~|. Flies great! Lo

Conscendo™ S 1.5m RTF
HobbyZone Conscendo RTF. Comes with DX4E transmitter, 2 batteries, charger, and manual. Flies great. Local pick up only. Price is FIRM!

Sport Cub 1.3m BNF with AS3X
Nice used Sport Cub for sale. Comes with float kit I never used. Flies great! Local pick up only. Price is FIRM!

Brave Night Flyer 1.2m BNF Basic with AS3X
EFlite Brave night flyer BNF with AS3X. Has about a dozen flights on it. Flies great! Local pick up only. Price is FIRM!

Waco YKS-6
. Waco YKS-6 has been refurbished with Solartex covering on fuse, silver monokote on wings, trimed with spa blue enamel spray with red pin stripe. G62 is basically new, all new High Tec 645mg servos

JR Channel Expander
New in box JR Channel Expander. Never used. 35.00 shipped in conus only

Garage Sale Ad!!
Three Parkzone Flyers with Two controllers 1. T-28 Trojan PNP. $100 Link to specs. https://www.horizonhobby.com/product/airplanes/airplanes-14501--1/plug-n-play/t-28-trojan-pnp-pkz4475 2. UMX Ce

Mugen Seiki MBX6T Competition Truggy
Mugen 1/8 4WD Offroad buggy with a Novarossi OVA 3.5 Nitro engine. It's about 95% complete. Needs throttle servo, gas tank, and a couple other little things that a pro should have already.  Thi

Thunder Tiger Raptor 30 V2 mechanics with cober fuselage
I'm selling a approach engineering ah-1f cobra fuse partially built and thunder tiger rapter 30v2 heli converted to electric. the helicopter was test hovered twice after conversion. will come with eve

Balsa USA Sopwith Pup 1/3 - 2.7
Wing Span: 108 in Wing Area: 4428 sq in Wing Loading: 15 - 18 oz/sq ft Flying Weight: 29 - 34 lbs Fuselage Length: 77 in Height: 36 in Recommended Engine Size: 45 - 70cc Gasoline Cowl Diameter:

Top Flite Giant Scale F4U Corsair Gold Edition Kit NIB Plus Extras
SOLD PENDING PAYMENT I have a new in box Top Flite Giant Scale F4U Corsair kit with a Tysplane cockpit kit ($75 plus shipping) and a complete Callie Graphics decal set ($35 plus shipping). Kit box wa

Yokomo YZ10
Yokomo YZ10 rolling chassis with a steering servo. It is missing a front shock but the rest of it is there. Has aluminum steering assembly and a oneway in the front belt drive. Body has a few cracks b

Top Flite P-51D Mustang Kit - 60 Gold Edition
SOLD PENDING PAYMENT. I have a new in box Top Flite 1/7 scale P-51D Gold Edition kit. Only opened to take pictures. I have decided that I need to get rid of some of my kits to fund another project

Exceed Drift Star
Up for sale is a Exceed Drift Star rc car. This car is in good condition with very small body scrapes on the front and a missing rear wing. This car has only been ran two or three times then put awa

Midwest 27% Super Stinker Fiberglass Cowl
New Midwest 27% Super Stinker fiberglass cowl. The mold seam is sanded and any imperfections (a few pinholes and mold parting seam) were faired with 3M Spot Glazing putty; it's also been wet-sanded w

1/4 Scale Big Fleet Biplane
SOLD PENDING PAYMENT. I have a new in box Concept Models Big Fleet Biplane kit. Only opened to take pictures. I have decided that I need to get rid of some of my kits to fund another project. I h

Pica Spitfire Mk IX - 1/5
i have a pica spitfire 1/5 scale mk trop all covered in fiberglass rivets and panel lines 3 blades aluminum spinner retracts aluminum wheels ready to paint this plane was flying is used and

Garage Sale Ad!!
1.) Futaba 7 Channel Fasst Transmitter and Receiver. 2.) Two High Capacity Li-Po batteries for the transmitter. 3.) 2000 maH NiMH flight battery. 4.) Turnigy Charger for all battery types, Powered

Garage Sale Ad!!
1.) Futaba 7 Channel Fasst Transmitter and Receiver. 2.) Two High Capacity Li-Po batteries for the transmitter. 3.) 2000 maH NiMH flight battery. 4.) Turnigy Charger for all battery types, Powered

Garage Sale Ad!!
1.) Futaba 7 Channel Fasst Transmitter and Receiver. 2.) Two High Capacity Li-Po batteries for the transmitter. 3.) 2000 maH NiMH flight battery. 4.) Turnigy Charger for all battery types, Powered

Spektrum DM8 Module for Futaba Transmitters
I have for sale a used Spektrum 8 channel DMS2 module (i.e. DM8) for use with Futaba 7U, 8U, 9C and 9Z series transmitters. Comes with original packaging, instructions, antenna and adaptor. This modul

RCV90SP 4 -Stroke Model Aero Engine NIB
RCV90SP 4 -Stroke Model Aero Engine NIB I have a brand new RCV engine that has never been out of box. Brand new no fuel no mounting just NIB with all paperwork that came with the engine. Please not

DX20 transmitter case
Very nice case! Brand New and fits 2 radios and accys.

Vess 27B propeller
New unopened Vess 27B ,similar to 10 or 12 pitch Also a 24 12 Zinger drilled for 100 to 120 engines. Both for 28.00 shipped in conus

Lanier Laser 200 - 3.2
I have a new in box Lanier RC 1/3 Scale Laser 200 kit. Only opened to take pictures. I have decided that I need to get rid of some of my kits to fund another project. I have too many and they are taki

Thunder Tiger Raptor 30 PARTS
I AM IN NEED OF SOME PARTS FOR A RAPTOR 30 HELICOPTOR. I HAVE THE VERSION 1 BUT BELIEVE THE VERSION 2 PARTS WILL WORK AS WELL. 1- TAIL PITCH SLIDER 2- TAIL PITCH CONTROL LEVER 3 - TAIL ROTOR BLAD

Garage Sale Ad!!
Avastar 40 with brand new .40 engine, two early 90s radios (one for buddy cord) 75% built 4 star 60 with fs 4stroke engine, servos included, needs batteries and receiver to complete p40 Warhawk with

Quality Aircraft Wild Thing Kit BNIB
I have a brand new in box Quality Aircraft Wild Thing kit. Only opened to take pictures. I have decided that I need to get rid of some of my kits to fund another project. I have too many and they are

Twinsync
Twinsync by Wike RC new.  I have the instructions also.

DLE35RA Cylinder
DLE35RA Cylinder brand new in box-Price includes shipping in Cont US.

Composite-ARF Extra 330L 2.6M ARF
Hello Guys, Up for sale is a CARF Extra 330L 2.6M ARF. I got this is a lot sale and planned on selling it once I got a canopy frame and clear canopy for it. I ordered the new canopy from Andy at CA

hobbico accu -cycle pro-elite
this a hobbico accu-cycle pro elite charges 1-10 nicd or nimhs or 1-3 lithium-polymer or li-ions it charges,discharger,analyer for rc it comes with own power supply,hook it up to 12 volt and temp s

jr -pro-pro transmitter holder
I have transmitter holder hands free good shape you can ajust height make it easyer to hold radio I take cost 90.00 it fully adjustable sides,on,off . over the sholder up or down. leaves hands free

Ball Links, Kwik Links, etc.
I have a bunch of assorted hardware for servo control linkage. There's: 28 Heavy Duty 4-40 Ball Links 8 Heavy Duty 4-40 Double Ball Links 17 4-40 Kwik-Link Safety locks 12 Hayes Steel Pin Clevis'

Control Horns
I have a bunch of control horns for sale. Here's what's included: 2- Rocket City Swivel Clevis Super Horn #8 Thread 4- Rocket City Swivel Clevis Super Horn #10 Thread 6- Nelson Hobby 8-32 Swivel L

Twisted Hobbys 32" Crack Yak RTF
I'm getting out of the hobby, and selling everything I have. This Crack Yak has a Sunny Sky X2204-21, 1800KV motor on it, and Hitec servos. It has an orange rx from HobbyKing, and I don't remember

Mounts for Satellite rx's
I have over 100 mounts for satellite rx's. Can be used to mount other things as well. Two different types. One type is a plastic mounting base with self stick pad on the back of it. The other type is

Airplane Holders
I have 2 of these airplane holders left to sell for just $15 each. These will hold your plane at the stab while you start the engine. It will probably cost at least $25 to ship one of these, so I do

Spektrum SR3000 DSM 3 Receiver
For Sale used Spektrum SR3000 surface receiver. For boat or car use Has programable fail safe when binding. 25.00 shipped to your door

Align trex 700e v3
Trex 700e with v3 tail All aluminum servo mounts Dfc head Chassis brace Castle voltage reg. 2 of.....new spare blades, landing gear, frames, rotor shafts, links, booms, boom supports enough parts

Garage Sale Ad!!
NEW IN BOXES!! Retail cost of these 19 parts is $335. -SIDE MOUNT ADJUSTABLE SERVO TRAYS . BVM PART 5535 X2 -WING SERVO MOUNTS & UTILITY BRACKETS. BVM PART 5545 X2 -SUPER BANDIT WING TANKS & PYL

look at this pakage deal wow!!!
here is a deal... eveything is new to this deal and cheap!!!... look at the pic this stuff is all new and top of the line! i have a christen eagle ll 90 arf new in the box this is a nice plane. the ot

Extreme Flight Yak 54 - 88
Wanted extreme flite canopy either red or yellow.

CARF Ultra Flash
Carf Ultra Flash RTF with Dreamworks Electric LG. Everything new installed on this build. Due to a life changing event, she must go. JR 8411's through out. Powerbox Sensor switch, dual Jeti rx packs,

MINI T1 New
MINI T1 Green Silver All new can't ship because I threw away the box No trades Thank you

AeroWorks 150cc Yak 54 parts
I'm looking for an upper cowling but frankly would like to collect some extra parts. If you have a cowling, canopy, wings etc let me know and we will see if we can find those unused parts a new home.

Sky aviation P-51 100” wingspan
Im selling a discontinued sky aviation p-51 mustang kit. The plane has a 100" span and is all fiberglass with the wing and control sufaces having a foam interior. Also included are robart main re

Nighthawk 280 Quad, Dominitor V3 Goggles, TATTU Lipos
For sale is a Nighthawk 280 Quad with radio. Also will include Fatshark Dominator V3 FPV Goggles and 3 2250 MAH TATTU Lipos batteries. Have all the original boxes for everything...

S75k ring r/c super tiger engine
Super tiger s75k ring r/c engine (No muffler) nib

DLE-30 , prop, bowman ring will trade for electric setup
I am listing a DLE-30 for sale, I purchased it from TOWER, and put a bowman ring and smoothed/polished the reedblock and seats before I ever installed it, and have always ran it on STIHL ULTRA HP oil.

Mamba monster 2 esc and torque flux motor
Mm2 esc and flux torque 2200 motor. Had it in my savage flux. $110 shipped

3W 106 B2 FREE SHIPPING! (was involved in a crash. See details)
I am selling my pride and joy 3W106B2 engine. This has been one of my all-time favorite engines I’ve owned. It has absolutely phenomenal power. Unfortunately, it was involved in a crash, when I lost m

Tower Hobbies .46 BB ABC
I have an older Pro .46 Tower Hobbies glow engine I don’t need and had on a J-3 Cub for a while. It has ran good with no problems but had a carb off of another brand of engine. I put the factory carb

FunAero S.E.5a - 60
WANTED: Looking to trade for a new in box 60~| FunAero S.E.5a. If you have a FunAero S.E.5a you are willing to part with, please contact me. Thank you.

Zenoah G-62
I have a nice Zenoah G-62 I got earlier this year for a project that I never finished. As the holidays approach, I have realized that the money would do me more good than the engine would right now, s

Kingtech K180G2, Kero
Recently purchased this on RCU but decided to go in another direction, have sold the jet I bought it for and no longer need it. It is basically a NIB Kingtech k180G2 that was purchased by the orignal

Global Jet F15 Eagle with jetcat Titan kerostart
For sale F15 by global jet club Complete RTF with landing gear, electronics, tanks etc and a Jetcat Titan Kero start turbine. Maple leaf can be taken off so it'll be the original prototype colours,

DL 100cc 111cc Carburator
Carburator for DL100cc or DLE111cc This carb is the factory one that can with the engine. I only used it to break in my DLE 111 on a test stand. There is nothing wrong with it. I had an extra walbro

New Desert Aircraft DA-100 WITH new canister mufflers and new Biela 28x10 propeller
I need to sell my new DA-100 with canister mufflers. The holidays are here, and I just need the money to help with our vacation to see family. The DA and canister mufflers are new. They were mounted

Ryan STA
A beautiful scale Ryan STA by Golden Age Modelworks USA.  Fiberglass fuselage with scale rivets along with built up wood wing (two pieces). Recommended set up (not included) Power 480; 4 ch

F/S or Trade, garage sale r/c
I have a bunch of r/c stuff to trade for a Tamiya f350 high lift roller First I have a losi night crawler roller , has a integumentary 55 turn motor, good condition I have a set of 4 Mashers on blac

Hangar 9 Extra 260 - 35% with NEW DA 100 and canister mufflers!
I bought this Hangar 9 Extra 260 in March, eager to get it flying, but ended up getting a Carden Edge around the same time. Now, the holidays are upon us, and I am trying to come up with more money fo

BTE Delta Vortex Kit
New in box BTE DELTA VORTEX Kit is complete and untouched.  Ships to lower 48 USA only.

Super Tigre S61K ABC with stock muffler (Italy)
Selling my Super Tigre S61K ABC engine with muffler. This is the Italian version with removable front housing. I no longer fly this size engine. This engine has very little run time as it has only

Os bgx-1
Hi guys, I'm looking for a crankshaft for a Bgx 1. let me know what you have thanks much Harry 5204002525

model battleship plans missouri bb63
for sale the plans total 5 sheets of the battleship missouri these are scale down copies of the original blue prints that were used to build the real battleship ,,really nice set of plans to build d

uss ticonderoga cg 47 plans
for sale this set of 3 sheets of the uss ticonderoga the length of the ship is 4 + feet long 1/96 scale plans are new never used .great details of this ship on these plans,bulkheads and everthing s

O.S. Engines O.S. .32 SX-H
Selling my OS 32 SX-H as I no longer fly helis and its time to clean out the drawers. This is a nice though not perfect engine. It has relatively low run time but was involved in an auto tip over

Skymaster BAe Hawk 1/3.65
I have a hawk 100 snub nose for sale. Skymaster large 1/3.65 scale. I have all the new jr slow start servos installed, powerbox dual smoke pump, all jr xbus setup with heavy duty centre hub and 4 plug

Futaba 10CG
this is my trusty Futaba T10CHG i used it for all of my planes although it is originally a heli tx. the difference is that the throttle has smooth action instead of clicking. works great i've had i

Mockingbird Aviation aluminum tailwheel spring setup
Mockingbird Aviation would like to announce the release of a new product for your consideration. It's an aluminum tailwheel spring setup that houses a stainless steel 4-40 threaded rod and stainl

Cermark Viper Mk II
This airplane is in new condition and professionally built. Includes Jet cat P-80SE Turbine with 6 hours total time. Add your receiver, bind and fly. The engine is guaranteed to be in excellent condit

E-FLITE Cessna 150 Areobat
BNF with your battery. All new servos from e-flite. This model is no longer available. Will ship . Call 8564982209

Horten BV-38 by Zeta Science
The Horten BV-38 is the airplane from Raiders of the Lost Ark. It never existed. This is the kit version of this plane, NIB, still sealed, and includes no electronics. It's the airframe only. This

Insane GX5 Big Block. Run once. No oxidation
I have a brand new GX5 big block hydro for sale. Run once then given to me. Comes with brand new Futaba radio. Lots of accessories. Battery charger. Fuel can with pump and filling accessories. PVC ra

Great Planes Fun-51
This Fun-51 is a profile fuse with a built up wing. It can be a 3D or fun fly plane. It can be powered by glow or electric. The box says it can be built in a day. Serious offers will be consider

Extra
Almost ready to Fly Extra 300 ( not sure on manufacture) . DLE 30 ( Only 3 tanks of fuel) , Mix of Servos with 645 on Rudder. Fourtitude fuel tank, Dual Switch, Just add receiver and batteries of choi

Sig Spacewalker II
This Spacewalker II kit has the wings about 90% built with the fuselage still in the box. Everything is there to build. I will ship at buyers expense but would prefer a local pickup in the Philadelp

Hangar 9 Sukhoi 3.1 m
I have a 3.1 m Hanger 9 Sukhoi I'm selling The air frame only. This airframe is in excellent condition, no bad landing or repairs. I'm the second owner and I set it up with a DLE170 and it flow fantas

Century Predator GASSER*PLUS MANY PARTS * DRASTICALLY REDUCED
********************SOLD************************** *******FIRST $ 300.OO TAKES THE HELICOPTER AND ALL SPARE NEW AND USED PARTS********** THIS HELICOPTER IS THE PREDATOR GAS MODEL, HAS 710MM MAIN

Saito FA-150S
This engine has been run a few times on the bench but was never mounted on a plane. It comes with everything a brand new one does except the price. Serious offers will be considered. This is for a

48" Sterling Chris Craft Corvette
1:10 scale 48~| Sterling Models CHRIS CRAFT CORVETTE BUILT WITH NO RUNNING GEAR CURRENTLY. Located central PA. Shipping at buyers expense. Make me an offer if your interested. Pics t

Smoke EL
Brand new Smoke EL System. Comes with two wingtip burners with G Force telemetry that activates on tight turns and loops. Item has never been used and is band new in box. $700

JetCat P300
JetCat P300 Just came back from service from JetCat in German. Airplane that was going to be used on was sold and just have the engine. Used about 2 hours before it was sent to service at JetCat. E

Airtronics 94102Z (8 servos)
Here are 8 Airtronics 94102 servos. One of them has a broken mounting tab and one gear with a couple bad teeth. The other 7 work OK. These are the later version of the 94102 that have correct wiring

FlyZone Sensei Wing Mounting Screws
Here are the over priced and sometimes hard to find nylon screws for mounting the FlyZone Sensei (and others) wings. When I couldn't find any in stock anywhere I went straight to the manufacturer a

1/4oz Steel Stick On Self Adhesive Weights x 100
I have a bunch of weight. Great for planes that need nose weight or tail weight $20.91 for 100 FREE SHIPPING

Top Flite Gold Edition F4U Corsair - 60 Kit, NIB
Top Flite Gold Edition .60 F4U Corsair Kit - New in Box. Specifications: Wingspan: 62" Wing Area: 700 sq in Weight: 7-9.5lbs Length: 48.5" .60-.80 2-stroke or .91-1.20 4-stroke Eng

Saito FA-300TL
For sale Saito 300 great for scale project . Sold airframe no longer need motor. Buyer pays Shipping USA ! Any ? Call 813-965-8746

ZDZ 120 B2 RV
For sale ZDZ 120 runs great. Low time went to 40% no need for motor at this time. Buyer pays Shipping USA ! Any ? Please Call 813-965-8746

Xoar 16x8 Beachwood Prop
Thanks for stopping by. I've got a NIB Xoar 16x8 prop that is no longer needed. Let me know if you could use this - 15 dollars shipped to the lower 48. Best wishes to you!

Super Sportster Bipe
New in the box Super Sportster Bipe KIT. Price reflects double boxed shipping with insurance. This is a classic out of production KIT.

Wings for Edge 540 Seagull 60-90
Looking for replacement wings for my Edge 540 (60-90) Specifically looking for the right wing or both

O.S. Engines O.S. .40 LA Blue in excellent condition
Broken in and flown twice. Super clean! Reliable OS engine. This is a great video representation! https://youtu.be/028PjsE2oNk

SAiti FA-270T Flat Twin(45cc)
Up for your consideration is a NIB Saito FA-270T(45cc) glow engine. $499.00 shipped(CONUS).

70cc gas 4 stroke engine
This is a almost new Torqpro TP-70 engine...It is a 70cc 4 stroke....I had about 10 flights with it ..It was just too much engine for my 50cc jenny..I like flying slower... Displacement:

For Sale
Used DLE 30 w/ignition side exhaust/rear carb includes aftermkt throttle and choke arms and 4 ea 2 3/8 inch standoffs. Good engine low flight time .Pics on request

Hangar 9 Meridian
ARF Hangar 9 Meridian. OS GT15 gas engine, Hitec Servos, 2 Hydramax 6 volt 2000 batteries.. Just add receiver and fly.. runs forever on a tank of fuel..

H9 Carbon Cub
H9 Carbon Cub is in excellent shape. It has only three flights on it. The plane includes RCGF 20cc rear exhaust with pitts muffler, master airscrew prop, tru-turn spinner, 6' dubro tundra tires, stand

Zenoah G-38
Used Zenoah G 38 side exhaust/rear carb. includes Bisson muffler and aftermkt throttle and choke arms

Aviation Design Super Scorpion
I am listing this for a friend that does not use RCU. Below is the description from him. Previous sell fell through. ~| This is a first Generation Aviation Design Super Scorpion. Jet is in excelle

Hangar 9 Cessna 182 Skylane - 150
ARF Discontinued Cessna 182. 30cc gas engine, Hitec servos.. Just add receiver and batteries to fly. Around 8 flights..

For Sale
Duralite Flight Systems PowerBoxes: PowerBox 40/24 Competition w/single sensor switch $185.00 Older Version PowerBox 40/24 Professional w/ 2 switches not sensor type $100.00 All in full op

For Sale
Bavarian Demon Gyro 3 axis flight stabilization system

Aero Subaru 91.7in
Almost Ready to fly 30cc Aero Subaru. 91 inch wingspan. Hitec Servos, Simple bolt on one piece wing. A dream to fly and lands on rails with flaps. Just add batteries and receiver of choice.

Great Planes Patriot - 40
Hi guys, here is a brand new kit that I haven't even taken out of the box .

N.I.B. Sig 1/4 scale float kit
N.I.B. 1/4 scale Sig float kit. $ 85.00 + actual shipping cost. paypal add 3.5% for their fees.

Balsa USA Fokker D-VII - 1/3- Full Kit
UNOPENED Balsa USA Fokker DVII kit. Actual shipping to be charged for delivery. Paypal users add 3.5% for their fees. Kit price is $565.00 + Actual shipping. Kit is new and stored in a clean envir

100cc plane sale, 3dhs, comp arf, wm, sd
I do old low energy 3d so the airframes have low stress 3d hobby shop 104 slick, new dle 120. I just installed it, flew previously on a dle 111. hitec 5955tgs. Rtf minus batts and rec. $1700 3d

Pitts Muffler DLE-55/DA-50/DLA56 PLUS SALE
Brand New Pitts Muffler Fits, DLE50 / DLE55 / DA50 / DLA56 / GP50R, JVO 52 plus others! 50cc size mounting holes are 40mm center to center For instructions on how to add a Muffler Bracket,

Hangar 9 Tribute 4D 36
For sale is a bind-and-fly Tribute .36 airplane. Comes complete with servos, receiver, battery, all pictured parts. It has the normal wear and tear of an older plane, but still flies like a champ. B

DLE 20 PITTS MUFFLER
NEW! Pitts Muffler for DLE20 20cc Gas Engine May fit other engines with 32mm center to center Mounting holes. Please check attached dimensions. Comes with mounting bolts and gasket $42.99 p

Flying Wing
For sale is a homemade flying wing, much like the very popular Zagi. Comes as a bind-and-fly with motor, servos, esc, and receiver (DSM2). Flies great on a 3S 1800mAh battery (no batteries included)

Hobbico Field Box
For sale is a barely used Hobbico field box. Comes with the power panel, Hobbico Torquemaster starter fuel jug electric pump and plumbing. No 12V battery included, and if I'm shipping it, no fuel ju

30 ROLLS OF COVERING
here is 30 rolls of ultracoat and monokote and a large bag of decals, dashs numbers ect ect. and all are favorite top Flite, Hanger 9 and a few others. A few rolls are new, some have a lot some are

Quadra 35cc Gasoline RC Engine w/Spring Starter & Muffler - Free Shipping
Quadra 35cc Engine with Spring Starter & Muffler. Nice, clean engine with smooth bearings and strong compression. One of a "lot" of several engines recently purchased. Engine looks ver

Mamba biplane by Flex Innovations DA70
One Badass Mamba Biplane with DA70, brand new, clothed Hobbyking wingbags , two total wingbags, Redline oil 40:1 , B&E Graphics, custom Black and Yellow Checkers with new Checker spinner, Carbon Fiber

VBar Control RX-Satellite
It is NEW without its box. The wire installed is for the old VBars before the NEO. In order to connect it to VBar Neo you will need to purchase the wire for it through Mikado($10). This is why i am

Seagull Edge 540 .60
For sale is a 60 size Seagull edge 540 This plane has a wingspan just under 64 inches. It is powered by an OS 91FX two stroke engine with less than a gallon of fuel run through it. 2 ea JR DS 537 o

Hangar 9 Edge 540 (1.20)
For sale is a Hangar 9 27% Edge 540 This is a great flying aerobatic airplane. Powered by a Saito 180 four stroke. 78 inch wingspan Throttle JR-417 Ailerons- 2 es JR ST125 MG Elevators 2 each J

Mustang 50 engine & starter(price reduced)
Price reduced!! Hey Byron Originals/Iron Bay Guys. This is a new in box Byron Mustang 50 gas engine and German Robbe electric start complete. Great upgrade for the original Quadra 35/42 powered P-51 b

Sig Piper J-3 Cub 1/5 NIB Laser cut kit
I have for sale a new in box Sig 1/5 scale Cub kit. It's still factory sealed. This is all laser cut. Asking $170 plus shipping. Would prefer a local pickup. US Postal Service money order only.

Spektrum AR9000
Each AR9000 comes with a satelite receiver.

Losi Aftershock Stock Wheel LOSB7001
I'm looking for a new or slightly used wheel for a Losi Aftershock. The part number is LOSB7001, and the description is "Magneto" Chrome Wheel. If you have one to sell and you want to

Extra parts for Phoenix Westland Lysander 60cc
I have the busted fuselage and right wing to the 126 inch Westland Lysander. Yes it has been pronounced dead. Underpowered takeoff and that was it. The landing gear is fine. One wheel pant is like

Sbach 60
For Sale Hanger 9 Sbach 60 very exciting and easy plane to fly. Can be purchased ready to fly with your Futaba TX. Saito 115. turbo muffler. truturn spinner and apc prop. 4 Hitec 645MG and 1 hi

Great Planes Big Stik 60
Big stik 60 very fun and easy to fly. can be purchased ready to fly with your futaba tx. OS 75ax. 3 inch red truturn anodized spinner apc prop. Futaba R617FS 7-channel FASST RX. 4 Hitec 645MG

WING BAG for Skymaster Viper 2.6meter
Brand new, never used, perfect condition, no defects. One large wing bag with divider and winglet bag extension, fits both wing halves with winglets attached.

JetCat P-80
For sale jetcat P80, very low time on 2hr 12 min, comes with both solenoids,Ecu v5 , Gsu, fuel pump and filter, all cables and led I/O board.

Philip Avonds F-15C Full Composite
This is Fully Composite PA F-15C. This is Elevon setup with rudder. This is airframe and landing gear only. No electronics. This been flown many time and several repair been done due to runway overrun

Powerbox Baselog - NIB
PowerBox BaseLog with MPX Cables PowerBox BaseLog features completely redundant construction. The regulators, the switches and even the micro-controllers which are responsible for the on / off s

Tamiya The Grasshopper
Fully assembled. Battery and Transmitter/Receiver not included. Manual and any extra supplies from box are included. Body does have a paint job, however the stock decals are included also. Operated ap

Demon Cortex 3-Axis Gyro Fixed Wing
Demon Cortex 3-Axis Gyro Fixed Wing + extra  NIB USB cable     Easy to Run: simply plug in your current control signals     No PC necessary     S

Composite-ARF Flash main tank
Offering a new perfect condition Composite-Arf  main tank, bypass bottom and intake mid section. No trades please.  Shipping included.

Desert Aircraft DA-150
I bought this and have never run an ounce of fuel thru it. I don't have enough room for an aircraft of this size. Someone will get great use out of this engine.

Blazer Backlash Gen 3 lite carbon
Backlash Gen 3 Carbon lite Vacuum bagged sides, floor for added strength Carbon rods added at 3 forward bulkheads Has Blazer turning and bracket, Insane transom hardware Comes with driveshaft an

KingTech K-80
Hi; I am selling my King Tech Turbine K80 20 lbs thrust with all electronics needed for installation to run the engine. 3.5 hours run time. It was recently returned to service by King Tech Turbine

Ace R/C 4-60
I'm looking for a new-in-box Ace R/C ~|4-60~| designed by ~|Doc~| Mathews. If you have a kit you would be willing to part with, please contact me at: aircats@att.net I pay immediately via PayPa

Peak Electronics (Sirius) Charger and Super Test
For Sale: Probably the best Nimh/Nicad charger and tester ever made. Sirius Caharger charges 2 RX batteries Super Test discharges to 1.1v per cell and reports mah I believe I have the inst

13 1/2 ft. 1937 Aeronca C3
Scratchbuilt and designed by myself, 45% scale, 13 1/2' wing span, 34 lbs, Futaba servos 333 oz in. Power 120 twin JC Evo. Covered with orange 21st Century, trimmed with blue enamel, plug-in wing pa

1917 Bristol M1C 152'' span
Up for sale is my newly finished 45% WW1 Bristol M1C monoplane. Designed and built by myself. Construction is balsa and lite ply. Dimensions are as follows: wing span-152~|, fuse length-111~|, chor

Slot Machine
GREAT PLANES SLOT MACHINE with hinges, marking tool and extra blades. Payment Methods: M.O, Bank Check or Pay Pal

O.S. 75 AX ABL
O.S. MAX 75AX ABL 61A CARBURETOR E40 With TOPFLITE WARBIRD MUFFLER and HEADER $175.00 USD Payment~|: MO Cashiers Check Pay Pal

Real Flight 7 and Interlink plus controller.
Real Flight 7 and Interlink plus controller. De registered on 11/13/2017 and ready to run on your computer. Register and upgrade to 7.5 free. Great condition, shipped by USPS. What you see is what y

top flight p51D
never flown, stunning aircraft. she has everything ready to go except a receiver. servos are there, wires etc. takes 6cell 22.2v lipo battery. DIMENSIONAL SPECIFICATIONS Wingspan: 65.50 inches

MDS .40 FS Pro
This MDS40 engine was running several years ago, but not recently. It has good compression and the carb rotates freely. Comes with the muffler. Also included is a second MDS40 engine that has two b

CORTEX
price includes shipping. any questions please ask Shawn

Wheels to Go
Wheels to Go (2-1/4~| 2 pair) (2~| 1 pair) ({1-3/4 set of three) ( 2-1/2' one single) (2' one) (1-3/4 two singles). Good condition, used. I consider this one item.

Futaba 14 SGA
Got this Tx/Rx set for my kid as a first radio....MISTAKE !!! so is for sale... It is the A version (airplane), one model memory was used, never flown, after finding it is a bit complicated for a b

100cc plane sale, 3dhs, comp arf, wm, sd
I do old low energy 3d so the airframes have low stress 3d hobby shop 104 slick, new dle 120. I just installed it, flew previously on a dle 111. hitec 5955tgs. Rtf minus batts and rec. $1700 3d

Composite-ARF Ultra Flash rtf
Comp Arf Ultra Flash. Rtf etc, has a Kingtech K140, digital servos etc, electric gear and brakes. Only 5 flights on new plane and turbine. low time bought new king Tech K140 turbine, 200 minutes on it

BVM Bandit arf rtf
BVM Mark 1 bandit. Rtf minus batteries and receiver. Kingtech k100 kero start. Great flying jet! low time, bought new king Tech k100. 5 hours on it ,(317 minutes) Includes air power models multi fu

Midwest Stand
This stand has been sitting in the shop, hard to believe was never used! A little dirty and one foam has a crack in it, but it’s in grate shape for my asking price. Due to size local pickup preferred…

Great Planes Big Stik 40
FOR SALE 2 NEW RIGHT HAND WING PANELS - IDENTICAL SIDES Sent by mistake - never used had for almost 2 years You will need at least another left side to complete a wing. Shipping not included

Hangar 9 Spitfire Mk II - 60
NOT GAS, converted to electric w/ lipo battery. Has never been flown by me. This plane is ready to fly, minus the receiver. has slight scuffs on prop, not critical. This is a very beautiful plane, and

TAIWAN TORNADO 120mm and ESC
I have a used, excellent 120mm Taiwan Tornado fan and a Castel 160 ESC for sale. This is a 12s set up and was used in a Skymaster/E extreme F-15. Was a 15lb plane and it flew it with excellent power.

Garage Sale Ad!!
I got all of this in a sale plus a DX8. Instead of risking damage I have decided to sell this new never flown package deal. 1700MM FMS P51 Mustang (NEVER FLOWN) Bomb Drop kit that also can drop ga

Sightler,racing boat RTR
Sightler hull all fiberglass 42~| hull, new 4025 brushless leapord water cooled 1600kv motor , dynamite new 120 amp water cooled esc. Water proof radio box. Trim tabs, turn fins octura 465 bronze pr

Quadra 100cc Twin - INSTRUCTIONS NEEDED
I need the instructions / manual for a Quadra 100cc Twin Gas Engine that has electronic ignition. Any engine or EI related instructions would be appreciated for this engine. I've contacted B&B Speci

OS Engines Gas GT 33cc
OS Engines Gasoline GT 33cc Engine. New in Box, Never Mounted, Never Ran. Beautiful Engine, as OS generally builds. I have no doubt will perform as good as it looks. Hard to give it up but I mostl

Wheel 50x19mm for 4 mm axis
50X19 mm wheel with rubber tire and ball-bearing for 4 mm axis CNC machined rim 7075, with ball-bearing, real soft rubber tire. Only 24 grams weight (included all parts). Perfect fits for some airli

Aquila Sailplane
Aquila This sailplane is modified to be powered electrically and was built eliminating the canopy and spoilers. The stab is a floating type. Both the stab and rudder are controlled by new HiTec HS

DA 70 full exhaust and smoke system
This is a full exhaust system with a smoke system. If you were to buy all this new it would cost over 530.00 dollars. I will list all the items and there cost new, You can buy this as a package or pi

Roban Superscale Bell 407 (700 size)
Price reduced by 100.00 This is a Roban Bell 407 (700) size prepainted kit. You will need to add your electronics to the aircraft. Includes scale lighting, landing gear, function doors and full i

3W Yak-54
This is an ARF kit. It is precovered and has most of the hardware necessary to complete the build. Requires minimum of 5 HD servos and a throttle/choke servo. Slots for dual gang aileron servos. I bou

Century Jet Models F4U Corsair /Retracts
Selling a beautiful Century jet models 1/5 F4U Deluxe kit 100 inch [3] piece wing that includes the highly optioned CJM electric main landing gear .....Electric tail gear.....[ CJM Electronic Sequen

Kangaroo Jet Turbine or EDF
I have a Kangaroo that has served me well in testing many fan systems. At this point I’m ready to make room for another project and need to make space. The Kangaroo will be airframe and nacelle only.

Top Flite P-47D Thunderbolt ARF
Nice p47 biult with all the good stuff, lipo batt, to art retracts, difrent scene than the box, little devil, Saito 480 radial on gas, flies great. Just don't fly it much, needs to be flow. This thing

AeroWorks Yak 54 150cc
Bought this and decided it's not my thing... Aeroworks YAK 54 - 150 cc version Was flown for one season by Aeroworks Team then hung up for display Includes all surface linkages Does have one tear

JetCat P-120 Serial #1389 PROPANE Start
Very Strong and extremely reliable engine. I am the original Owner.. Has 42.5 hours total (7.5 hour until recommended maintenance). Has a dent in the can from bad packaging on my part when sent

two stroke thunder tiger 51


two stroke os .46 fs


ZDZ 40B Sportsman
Used, well kept and in great condition. Great compression, runs awesome, some cosmetic scuffs and such. No muffler (funny story). Not needed and it needs a good home. %^) Free basic shipping CONUS.

OS four stroke 48


OS four stroke FS 61


O.S. Engines O.S. .46 FX


OS 40 FP two stroke


Skymaster F-22 Raptor fuel cells
Hi, I have a pair of SkyMaster F-22 fuel cells. These cells are brand new and do not include any kind of hardware. Please call or text 617-538-7755 Matt, for additional info.

Aeromodel G-Shark
I have a NIB Aeromodel G-Shark ARC. Giant scale airplane, 63~| long by 84~| wingspan. Price to sell $299 including shipping to lower 48 Willing to trade for GS Top Flite p-47 kit

Losi DBXL 30cc
I have a DBXL with a aftermarket 30cc engine, exhaust pipe, full skid plates, proline trencher tires, DGI turnbuckles front and rear but rear haven't been installed yet, K&N airfliter not installed, a

Aviastar 120 and 200 Engines(NEW) in box..
selling for my friend (2) brand new engines...the 120 for$175.00 and the 200 for$225.00.....total $400.00....will sell seperately...both come with a Bisson...(new) pitts muffler....payment would be po

Phoenix Strega 40
Selling for a friend,a BRAND NEW, Ready to fly Strega....just add receiver and battery.....Has a brand New OS 46 (2 stroke)...never had fuel....all JR servos installed..Reducing the price to $150.00 .

DA-50(new in box)..Jtec pitts muffler(NEW)...
Selling for a friend a brand new, DA-50 and the J-tec Wrap around pitts muffler....reducing the price....great price for both $550. 00 shipped .....the spinner in the picture was sold....thanks for lo

JR 11X 2.4 DSM2
Clean used 100% functional 11X with fresh LiPo battery, 1 GB SD card included. At asking price of $190, I'll ship insured to any address in the contiguous 48 states and eat the PayPal fees. What you s

Navy Cat Turbine Powered Jet Central Bee
Add a 9channel receiver and this plane is ready to fly. Considered a trainer but will do all maneuvers. This is the latest carbon fiber version. All servos are hightech metal gear digitals. Spring Ai

Cessna 421 ARF Deal
For quick response email scaledynamics@yahoo.com (Read carefully) Here is a great deal for someone that has been looking for this ARF? One orange is a complete kit! Plus, almost another ARF! But miss

Jetcat GSU
I have a Jetcat GSU. New. Never used.

Saito FA-65
Saito FA 65 four stroke like new, $100 shipped

Zenoah G-23 Gas
Zenoah G 23 , ran great when I shelved it, may need carb kit $115 shipped

JetCat GSU
New Jetcat GSU. Not needed.

Balsa USA Sopwith Pup - 1/4
1/4 Scale Sopwith Pup Wing Span 77 inches Wing Area 1985 sq. in Flying weight 12-14 lbs Full Size Rolled Plan and Instruction Wire Landing Gear and Struts Basic Hardware Package ABS Plastic

Saito FG-40 Four Stroke Gas engine
Saito FG-40 Four Stroke Gas Engine Up for sale is a Saito FG-40 four stroke Gas Engine. Engine is in like new condition with very high compression and smooth bearings. Please see pictures for condi

Futaba T8FG Super
6531 Nw 87th Ave Suite T -3810 Miami Florida US 33178

Focke Wulf FW-190 Electric German Fighter by Freewing
Focke-Wulf FW-190 WWII Fighter Up for sale is the Fw-190 German fighter by FMS. Wingspan is 55" with a length of 48". The plane is powered by a 4250-850KV motor and has retracts, removal Dr

Associated RC10B5M, RC10L3 and RC12L5
Looking to trade or sell as rollers no electronics unless the right deal is made. If you have something to trade send me a offer. Didn't have to be rc related. No need to ask what I'm interested in as

Dave Platt Brucker Jungmeister 1/4 scale airplane
Dave Platt ¼ Scale Brucker Jungmeister Dave Platt ¼ Scale Brucker Jungmeister Up for sale is a ¼ Scale Dave Platt Brucker Jungmeister. This is a hand built model with a OS 120 FS four stroke engin

AquaCraft AirForce
AquaCraft AirForce RTR New with Upgraded Evolution 52 Engine New. Brand new assembled and test started. Comes with Futaba/ Aquacraft 2 channel Transmitter and new 6 volt NiMh Battery installed. New E

2 new DLE 55RA engines/CW&CCW/P38 spinners
Hi, I have 2 DLE 55 engines for sale they come with ignition and satndoffs. These are new and never have been flown. I have a set of props for both engines and one engine is counter rotating for a

Yellow Aircraft P-47 Thunderbolt
HI I have a New in the Box Yellow Aircraft P47 (bubble) kit for sale it is new and has not been started. The kit comes with the air support and landing gear, fixed tail wheel. It does not have th

Traxxas E-Maxx RTR
Traxxas emaxx with carbon fiber conversion kit, aftermarket dual rate shocks, Novak HV Maxx brushless esc and 4400kv brushless motor, Traxxas TQ radio system (2 channel), upgraded drive shafts. Only t

Aura 8 flight controller
Like new aura 8. Pulled from my Flex Cessna 170. Paypal only. $60 shipped. Not 55, 50, 45 etc.

Axial 1/10 scale Yeti Rock Racer 4 WD
For sale Axial 1/10 scale Yeti Rock Racer 4 WD. Truck is extremely fast has upgraded Vanguard 3150 KV motor and includes axial AX-3 2.4 GHz transmitter, a Duratrax Onyx 7.4 volt 5000mAh 25C 37Wh LiPo

Secraft Fuel Cap Dual V2
Secraft Fuel Cap Dual V2 new price is ship to your door

Secraft Fuel Cap Dual V2
Secraft Fuel Cap Dual V2 new price is ship to your door

Skymaster light controller
This is a light controller came in a Skymaster plane i dont have instructions for this

12pc Needle files
Still have many of these left You get 12 files You get 2 of each Flat, Round, Half-Round , Knife, Triangle , Oval $10.61 shipped

ELITE AEROSPORT SHOCKWAVE
I am selling my Elite Aerosport Shockwave turn key and ready to fly. Included: Shockwave Airframe Upgraded main gear wheels brakes and struts Wing tanks Custom Revoc (color matching) wing and

Hangar 9 46% TOC Ultimate 10-300
Plane has a DA-150 that runs great. Has smoke,wing bags and all new hi-tech 7954's in the wings. has a spectrum reciever and a carbon fiber prop. The plane also comes with a brand new uncut cowl.

AeroWorks Yak 54 100cc
This is a very nice Yak 54. has Fromco batteries, with a sweet running DA-100,duel recievers.It comes ready to fly with a Spectrum DX 7 radio with case. This plane flys like it is on rails.

Chargers - New
Up for sale are two chargers. 1: Hobbico ACCU Cycle Elite (near new) Complete with power supply etc. 2: Dymond Super Turbo Charger Brand new and never used. $65 for both Shipped!!

CMPro Lancair 360 /Mk2 50
Brand new in box. Blue and white color scheme. Beautiful ARF kit. $130 Plus Shipping

FB Jets Dolphin S Cradle
Custom made cradle for FB Jets Dolphin S. Cradle seats are positioned and align with fuselage formers. Airframe is cushioned with industrial foam.

HobbyZone Super Cub S 1.2M - BnF
Hobby zone super cub s BnF basic. Brand new in double box ready to ship. Just add charge your battery,add, bind and go fly!!

Hangar 9 Aresti 40
Hard to find Areati 40 by hangar 9. Plane is in mint condition. It's a great sports pattern plane. Cowl has some surface cracks but just cosmetic. Also comes with all servos installed. Ready for

RC Guys Pitts S1 - 33% with new DLE55 RA
RC Guys unassembled Pitts with red and white color scheme. Plane includes NEW DLE 55RA and Horizon Hobby custom pilot head. Will also include NEW Biela (22X*) prop (white) with plane. A $1300 v

Futaba 9CAP PCM W/XPS Module and Receiver
This transmitter is very clean with no broken switches, scratches or wrinkling in the chrome like many others have. It comes with a good life battery pack and an Xtreme Power Systems 2.4 conversion mo

Pacific Aeromodel Gee Bee Y ARF 97" yellow/black
Used plane with Zenoah G62, servos, etc and ready to fly--just need receiver. I bought the plane from a good friend who was getting rid of planes in light of his cancer. He paid $800 from some guy

Royal Curtiss P6E
New in box hard to find Royal Curtiss P6E kit. Super nice quality full build wood kit. See enclosed pictures for specifications of kit. Also included with sale are 15 close up pictures of the full sca

28% Pilot RC 108" Decathalon witn new DLE 55RA
REDUCED!!!!28% Decathalon from Pilot RC and NEW DLE 55RA plus 2 NEW 22X8 white Biela props. Plane is not in box but have all parts in original plastic. I bought plane, engine and props from Chief A

Spektrum AR12020 receiver NIB
Spektrum AR12020 12 CH Receiver with X-Plus NIB

G P Cap 580 1/3 Scale INSTRUMENT PANEL
Looking for a Great Planes Cap 580 ARF ~| Instrument panel ~|

Spe,Rcgf ,26 cc engine?
Hello guy's here is a new engine that I think is a spe 26 cc. I am not sure of make ,can't find any name on it. It really looks nice,comes with stand offs,ignition and muffler. Thanks for looking.

Quadra 35cc Gasoline RC Engine w/Spring Starter & Muffler - Free Shipping
Quadra 35cc Engine with Spring Starter & Muffler. Nice, clean engine with smooth bearings and strong compression. One of a "lot" several engines recently purchased. Engine looks very cl

Alula-TREK Glider-Slope+DLG+Motor Glider-BNF-Free Ship
Dream-Flight Alula-TREK Glider Can be flown as a slope soarer, discus launch glider or a motor glider. Comes with two separate fuselages, one for soaring and one for motor gliding. Comes with the

E-Flite Blade MCX2 RTF
Blade MCX2 Ready to Fly in excellent condition, no damage, very little use. Comes with the following components: 1 Blade MCX2 Helicopter with rear body 1 Blade 4 channel transmitter 1 E-Flite DC

Futaba 9CAP PCM Air
This transmitter is very clean with no broken switches, scratches or wrinkling in the chrome like many others have. It comes with a good ni-cad battery pack but no module is included. A Futaba factory

ProBoat River Jet
ProBoat River Jet rc boat in great shape. I does have a couple of little scratches on the bottom. Comes ready to run. Has a new battery for the boat comes with the radio and stand. Feel free to ask an

waco biplne RTFLPU
I bought this plans built Waco Saturday with the intentions of getting it into the air. But, I have found an RC plane that I want more, so this is up for sale. This aircraft has an Enya 80 four str

Goldberg Decathlon RTF LPU
This Decathon looks like it has been through a battle, or two, or three, or... Anyway, it has never been wrecked that I know of and flies great! Inverted flight, rolls, spins, knife edge passes, take

Secraft V1 radio tray
Secraft radio tray with hands support ship to your door

Sky Toys UAT
Brand New Sky Toys UAT this are like the Intarco but less expensive only 1 left

XICOY DIGITAL WEIGHT AND BALANCE CG METER
Xicoy Cg Balancer in excellent conditions include Bluetooth adapter and case and batt, i will ship to us or PR on flat rate box USPS .Canada will add extra shipping.

Byron F-16
Byron F-16 all framed up with sevrvos installed on control surfaces. This is later version with stab servos in the tail. Has retracts installed all parts to finish . Comes with extra set of wings and

1/4oz Steel Stick On Self Adhesive Weights x 48
I have a bunch of weight. Great for planes that need nose weight or tail weight Lead weights are like 15mm x 12mm and thick The ones Im selling are 19mm x 16mm and thin $12.67 shipped for

Smart fly super regulator
Built-in BatShare Deans Ultra Plugs In & Out For use with 2-cell Lithium Packs Adjustable output voltage, ~5.1V-6.4V 7.5A continuous, 15A peaks ( 8.4 volts in & 6.0 volts out) Optional Failsafe S

Dubro 1/3 Scale Vintage Wheels
Dubro 1/3 Scale Vintage Wheels 9.33~|, New In Package. $84 list price, selling for $65 plus shipping and if PayPal is used any fees that PayPal charges must be included. I will take a personal check i

Futaba
Hello, you are bidding on three Futaba servos and switch mount. These were assembled in a cub but never flown.

1/3 Scale Balsa USA Mercedes DIII Engine Kit
I have a 1/3 Scale Balsa USA Mercedes DIII Engine Kit for Sale. It is designed for their 1/3 Scale Albatross. The box has never been opened. It lists for $173.20, I am selling for $130, plus shipping,

Smart-fly
Hello, here is a new 9 channel power expander by smart fly. I do not sell anything I would not use my self. Thanks for looking,harry.

DLE 120 carburetor
WANTED: NEW, DLE 120 carburetor, new in the box.

smart-fly pro


Byron Mig 15
Byron Mig 15 all framed up flying surfaces glassed ready for servos and power. Has removable wings. I will meet within 75 miles of Fresno for delivery

RTF BVM Electra, 12s, BVM electric gear
For sale is a kit built BVM Electra with all stock recommended JR servos, BVM electric gear conversion, TAM trailing links on the mains, iGyro. Can be had with, or without Futaba receiver. Model has

Schuebeler DS-94 DIA HST
Schuebeler DS-94-DIA HST with DSM6740-600 For 12-14S setup. up to 10 kg of thrust

IGyro3
Like new IGyro3. Was used for 14 flights Includes USB cable

four new rc airplane's!
i have a deal of a life time here guy's!! the first one is a cmpro cessna with a new never ran rcgf 26cc gas engine and all new hitec 645 servos. the next one is a hanger 9 christen eagle II 90 new in

YS Engines FZ110S regulators
I have 2 YS 110s regulators up for sale that i bought for extra parts and then sold my engines.

Great Planes Cap 580 1/3 Scale spinner 4.0 in
For sale a brand new alum. spinner for a 1/3 Cap from GPM. This spinner is 4.0 in and is painted blue. Can be used in other applications. Comes with mounting hardware. Asking 23.00 .Will ship at buyer

Quadra???
i’m selling an engine that i believe is a quadra. its only for parts since i’m not sure it runs, it was on a dynaflight pt19 i think its a 30cc asking : $30

Ziroli P-51 Mustang
i have this assembled p-51 from ziroli, its ready to paint, comes with all servos futaba, robart retracts. only 6 flights with a brison 95 (engine not included), tail wheel retract robarts. one piece

Top Flite F4U Corsair - 60
i have a brand new kit top flite corsair gold edition i bought it a few years ago but never had the time to built asking $120 obo + shipping

Hirobo Sceadu EVO .50
Used Hirobo, it is a complete airframe, has all the nitro parts included. Canopy has been cut out on the bottom for a 6S lipo, front canopy mount has been modified and battery tray removed (battery tr

Lado programming card
Buyer pay shipping and PayPal fees

Skymaster Avanti XXL
For sale is my Avanti Skymaster XXL, it is the ~|Cadillac of the sky~|. It was built less than a year ago and had only about 15 flights. I just have too many jets and not enough time to fly them all.

Lado actuators
I have 3x Lado RS666 actuators. They are retailed at $140 each, I am selling it at $95 each. Buyer pays shipping and PayPal fees.

Laser 200 23 % scale
New part built older plane Laser 200-- 66 inch wing span , from plans by John Eagle Airplane Factory. very well built . Have all full set of plans for it and all you see in the pics for it .Plans show

Airplane
Have a what I think is a Mustang Strega racing mustang. approx 68 inch wing span , all balsa and in very nice condition . Vintage and I do not know the maker of it, does not have a motor or servos or

Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Traxxas


Team Losi Eight-E 3.0
This is a great condition 8ight E 3.0 rtf with everything pictured. Comes with new set of tires and 4s 5000 lipo. No rx or tx




 
RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2018.
Terms of Service | Privacy Policy
 
GET FREE RC CONTENT FOR YOUR WEBSITE

Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

Products Videos WattFlyer.com RC Classifieds

RCU2 | 54.234.45.10 | 0 | 1 | 11:54:44 AM EST | NC