RCUniverse Classified Ad Market Archive

Showing Listings No. 6901-7200 of 20000

   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67 
 
2 - HPI Racing RS4-2 kit with motor and extra's
hello, I have a nice hpi rs4-2 kit. well I have 2 of these, I picked one up from e-bay for parts so you will get both cars plus ALL the parts I have for them. right now there's only one that's

Pica Waco YMF-3/5 - 1/6 Scale 60"
This is an old kit, been around for quite awhile and the box shows some wear. The contents appear to be in excellent condition, but being an old kit, I'm selling AS-IS. One of the benefits of this bei

Garage Sale Ad :: ENGINES!!!
***$200 SHIPPED for all remaining engines! That's 15 engines, and $70 off my asking price!!!*** Too many engines and not enough time to use them. I've been working on my full-scale project, and hav

tigerjet pulse engine
vintage pulse jet engine. new never started

E-Flite Mini Ultra Stick
One MUS Comes set up with the following, tested but never flown. (4) HS-56HB (1) Align 35 ESC (1) e-Flite 480 (1) TP 3s 2250 (1) Prop 11x3.8 MUS and all electronics are all New. $2

O.S. Engines O.S. .40 LA Natural
Engine is in used condition. Needle valve is broken off, but keep reading. Good compression, turns smooth, etc. It really needs a good cleaning, as seen in the pictures. Sold as-pictured, no box. N

Two GWS Brushless Slow Sticks
Up for sale Two GWS Slow Stick's! The 1st: BNF: Brushless, Phoenix 35 ESC, 1500 3S Lipo, Spektrum RX, Full Symmetrical Wing with Aileron's and steerable tail wheel. The 2nd: Brushless, Flat Bo

O.S. Engines O.S. .46 LA
I'm not sure why the pics are rotated... It's an RCU thing, I guess. Engine is in excellent used condition. Good compression, turns smooth, etc. Sold as-pictured, no box. I accept payment via Pa

reciever battery volt checker


Sig Fazer
A brand new, still wrapped in plastic SIG Fazer kit! I accept PayPal and USPS Postal Money Orders. Thanks for looking! -Wayne

Ace R/C T-34 Kit
New in the box Ace T-34 kit, with foam wings. The box has seen better days, but the contents appear to be in good condition. I accept PayPal and USPS Postal Money Orders. Thanks for looking!

Air Flair Diamond Tea
A blast from the past! The Diamond Tea was designed as a competition fun-fly ship, and is capable of extreme maneuvers. It's not a modern ~|3D~| plane. These are different styles of flying. The kit

Ace Mini Foam Wings : 3 Sets
Three pairs of Ace Mini Foam Wings. Two pairs of straight, one pair of tapered. The boxes are old and dingy, but the wings look good. A little dusty from storage, but no obvious signs of damage. One o

Hacker Funny - 1/2A
This ARF is brand new, and all parts are accounted for, even the pre-assembled fuel tank. This is intended to be a two channel model for 1/2A power, designed for a beam mounted engine like the Cox Tee

Yellow Aircraft F-16A Falcon
Yellow Aircraft F-16 A short Kit up for sale. This is the old polyester fiberglass version in good condition. Airframe only comes with everything seen in the photo (no landing gear). Prefer local pick

Komatsu Bulldozer by Kyosho
Looking for working condition or NEW Komatsu D 575 radio control bulldozer 757 803 3787

JR 11x with R921 2.4 DMS2
I am out of the Hobby and not using this any more This is 2.4 for heli airplanes and salplanes The screen has a small scratch on it other than that it still looks good and works great and

OS 91 hz
I am selling an O.S. .91HZ engine with a align 90 pipe. The engine is in excellent condition. Tower has it for $400 without pipe and the pipe alone is $90. Asking $230 shipped and paypal.

Composite hornet 2
Ready to fly with your remote Upgraded hornet 2 Electric Collective pitch all carbon fiber body and tail boom Heading lock gyro New 7cell battery Speed control included New blades Will

CARF Extra 330SC 2.6m (35%)
For sale is my Composite ARF Extra 330 SC 2.6m. The plane is in excellent condition and had only a few flights. It had a deadstick landing once and in fact of that the fuse had a small wrinkle right b

Hirobo shuttle SCEDUE 32. 3d ARTF
I have a almost ready to fly 30 sized Hirobo shuttle 3-D helicopter Includes new carbon fiber blades not installed yet Has some mild upgrades almost ready to fly with your radio and receiver M

Hirobo Huges 500 .32
Hirobo huges 500 Os.32 nitro Belt drive Some hardware upgrades Remote glow Volt watch this Heli has been flown over 25 times flys great Overall in good condition, underside of body has some nor

Carf Tutor Behotec C50 Electric Retracts
I have a set of Behotec C50 electric retracts for sale, they fit the Composite ARF Tutor. The conversion was done by Down and Locked. This set contains all 3 retracts and the electronic controller, bu

IQ Hammer 170+ turbine
For sale is a IQ-Hammer 170+ turbine (38 lbs of thrust) with about 1 hour of runtime. It comes with all the original accessories except a battery and I'll also include a FOD screen. The turbine has a

tuned pipe for YS 120-140
tuned pipe with header for YS 120-140 no bents, never crashed, pipe is 15~| long 1-1/4~| wide stinger is 3~| header is 10~|

E-Flite Blade CP Pro
Brand new. Charge it and it's read to fly. $90.00 Cash upon picking up or US postal money order if you want it shipped. Not interested in trades. Thanks for looking. Questions welcome I've lowe

WANTED AR6255 carbon fuse rx
Hey Guys, I'm looking for a couple A6255 RX's LMK what you have Thanks, Scott

Pica T-28B 1/5
This Cox-Pica T-28 Trojan is the second version and is new in box,perfect cond.The plane is a perefect conversion to electric which is what I did with my other one. These planes are no longer in produ

Traxxas Revo
Brand new revo 3.3 roller. Brand new tekno brushless conversion. Motor, pipe, & tank not included. Tires are dry rotted from sitting forever. Comes with brand new unpainted proline chevy truck body, l

89" Bates Dewoitine D.520 short kit
This is a quality Bob Holman short kit for the Jerry Bates 89~| Dewoitine D520. My Kolm IL135 is too long for it so I moved into the same kit but in the 115" version. The 89" short kit is st

O.S. Engines O.S. BGX-1 3500
Here is a brand new O.S. Bgx 3500 engine with no box it includes manual,new stock muffler,radial mount new in package gaskets and back plate and screws and i will throw in a used pitts muffer as well

Castle ICE HV 80
1ea. Castle ICE HV 80 ESC. Good condition. Has no connectors attached. Used in a pattern plane and never had any issues. $ 75.00  with Free Shipping in US Only.

HiMax 3630 F3A Motor
1ea. Himax F3A motor. In good used condition. Just came off a backup plane and runs strong. Some minor scratches on case from installations in various planes. Motor is approximately 2 years old. Still

Saito FA-150S
Wanted: Saito 150 muffler. I have the exhaust pipe but lost the muffler. Any help is much appreciated. Many thanks.

Plattenberg 30-10 EVO
1ea. Platty 30-10 Evo motor. Excellent condition, was used mostly as a backup motor after 1 season. Runs smooth and has connectors attached. $325.00  w/Free shipping in US

Spektrum AR6100e
Spektrum AR6100e - this is the withe the connectors at the end - excellent condition

Great Planes Cap 580 - .46
Looking for Great Planes Matt Chapman Cap 580 .46-.60 with the original splatter paint job. Would prefer new in box. Thanks for looking.

Model Power Extra 330 LX
Absolutely gorgeous Model Power Extra 330LX 2.7 meter ready to fly. 3W 110 ,MTW 75K canisters and custom headers.Very nice fuel and fueling system smoke ready (except pump).Lipo power-2-1600 ma for fl

Spektrum AR9000
Antenna came off. Sent back to horizon for replacement. includes new satellite

K&B engines
Bought for project that didn't happen. $30.00 each, both for $50.00, plus shipping. They are 28's , not 25's.

AR7610
AR7610 NIB - unopened

JR X9503
JR Heli X9503 DSMX - Used Excellent Condition. Less than 2 years old, still under warranty. Will provide copy of receipt.

Align T-Rex 450XL 500e
H4046643113ere we have trex 450XL all align motor servos esc nav lights bnf call if interested

BVM "UAT"
I am finishing up my Btron F20 conversion to Turbine and I need a few more parts. What I am looking for is the BVM "UAT". If you have one lets talk

losi xxx sct
i have a losi xxx sct 1/10 .has a traxxas xl 5 speed control and titan 12t motor. Hitec 645mg servo truck is in very good condition with very little use . Only wear on truck is on mud flapsfrom wheeli

Great Planes Ultimate Biplane 1.60 ARF
I have a Great Planes Ultimate 1.60 for sale. I haven't finished assembling it but most of it is done. I purchased this plane new-in-box January 2014. Everything for this airplane has been purchase

3" Carbon Fiber Ultimate Spinner
3" ultimate cf spinner in very good shape. Spinner bolt included. Drilled for DLE 30, 35. $15 plus $5 shipping

.25-.40-.Giant Scale Airplane Sale
I am about to graduate in May from App State, and with my new job I will be able to purchase a few planes I have really wanted, and will be willing to trade for. These are the planes I WANT not the pl

Seagull Ultimate Biplane 90
Nice Ultimate Bibe. Has approx 10 flights. New DLE-20 gas engine runs like a top and perfect for this plane. Includes Hitec HS-485BB servos on Ailerons, elevator and rudder with HS-422 on Throttle. 2

Yellow Aircraft P-47 Thunderbolt
This is a morphed P 47, 1 of 2 thunderbolts plated at MM. The outer skin was aluminum plated by Metal-Morphous Inc as was the paint work and details such as engraved panel lines,rivets and fasteners

Hangar 9 extra 300 35%
Hangar 9 extra 300 BNF for sale includes wing bags da 120 hi tec hs- 7950th high voltage servos all around jr r921 receiver smart fly fromeco 5200 mah batteries x2 cube charger 2 jr matchboxes

Herbrandson 218
Herbrandson Engines modified for RC use and in good condition are EXTREMELY rare, but ironically parts are still available... This engine was sold to me as a Herbrandson 289, but I'm now told its a

CHARGERS
1EA- HOBBICO QUICK FIELD CHARGER WITH LEADS(HITEC-FUTABA) $35.00 1EA-HOBBICO ACCU-CYCLE W/LEADS (FUT-HITEC) CHARGES-DISCHARGES-NICADS-NIMH. MISSING INST.MANUAL.-$25.00 1EA HOBBICO R/C MULTI CHARGE

Flair Legionaire (Nieuport 17) -PRICE DROP
NIB Flair Legionaire. Quality kit made in England, complete with plans and Aluminum cowl. A nice kit and great flyer as I already have one built.

*PRICE REDUCED**3 GEAR MECHANICAL RETRACTS
***new lower price*** NOW WITH FREE SHIPPING TOO ! MECHANICAL RETRACTS - 3 GEAR MECHANICAL RETRACTS ARE FROM HOBBY-LOBBY B-25 APACHE PRINCESS. THIS IS A 55~| SPAN ELECTRIC ARF. THEY CAN BE MOUNTE

OS 25 VFDF
This is a NIB engine. The engine was orginally made for the AeroJet 25 ducted fan unit. There were only 500 made. I also have the MAC pipe made for this engine. The engine can be use with a prop als

RC4WD Trail Stomper
RC4WD Trail stomper, only ran indoors, one time. Comes with rc4wd 1.55 steel wheels with 1.55 mud slingers. Upgrades include: 2 yota bodies. RC4WD TF1 billet front bumper, venom rear bumper. Custom ro

Dyna Tron


Traxxas T-Maxx 3.3
T-Maxx with traxxas aluminum bulkheads front and rear. Rpm true track rear a arms rpm front a arms. O.S. .21Tm engine with pull start. all it needs to run is a receiver and transmitter. Also has 17mm

O.S. Engines O.S. .46 FXi
Clean engine with good compression, smooth bearings, runs perfectly. Includes pitts muffler and glow plug. Nothing damaged or missing, ready to mount and fly. Asking $45 plus $7 for shipping in the lo

Traxxas Revo 3.3 w/ New Engine and Pipe
Selling Revo 3.3 nitro in excellent condition! It is a great machine; fun, fast, and ready for some major bashing or racing! It has reverse with opti drive. The transmission is in excellent condition

Great Planes Gee Bee ARF


Super Tigre G 20 (1.20)
Italian made, good compression, smooth bearings, runs great. Includes pitts muffler, glow plug and heavy hub prop nut. Nothing damaged or missing, ready to mount and fly. There are some castor stains

Garage Sale Ad!! NEW Spektrum Receivers
New in the box, Spektrum Receivers DSM2 2.4GHz. Shipping is free! -AR6110e $20 -AR6100e $20 SOLD -AR6100 $20 -AR9000 $90 SOLD Please contact me with any questions.

AXI 2814-12
I'm selling an AXi 2814/12 motor. It is lightly used and has the X mount. It has Sermos connectors on the motor leads. I will sell it for $40 and pay postage. I only accept US Postal Money Orders

AXI 2820-12
I have for sale an AXi 2820/12 brushless outrunner motor. It has the full mounting kit installed and Sermos connectors of the motor leads. I will sell it for $45 and pay postage. I only accept US P

Duratrax DRX8-E
Brand new RX8-E, just built, never run. Needs electronics.

Quadra-Aerrow Q75M
This is a Bennett Built Quadra BQ75M originally purchased for $760. Engine has never been run. It includes the Bennett spring starter, rear mounting plate and muffler. $585.00 including shipping.

60 Size Plane
This plane will be sold PNP, all you need to do is add your flight pack and receiver. This plane has always been nice to fly but just is not one of my favorite planes. It has a super tiger 90 for a mo

Spektrum A5060 Servo
Looking for 4, Spektrum A5060 Digital Servo's.

JR-NET-JS72 SYNTHESIZED FM RF MODULE 72 Mhz
This is a JR Synthesized 72 Mhz Module Works great....Sold as is....Thanks for Looking and............Good Luck.....

Combo only $599 !! Fly-Model Navy Cat Jet CF + Air Retract (oleo/trailing-link)
ARF kit. Top quality balsa/plywood construction, perfect for both beginners and experienced pilots. Come with all hardware and accessories, engine and servo are separate purchases. Forum: http://w

FUTABA 7UAFS TRANSMITTER ONLY*** CHANNEL 50 ***
This Is a Futaba 7Uafs Super Seven channel Transmitter on Channel 50 ...72 Mhz.Transmitter has blemishes and dings also missing a Mix switch at the top Right.Tx Is shown Powered up in the picture so Y

Viper 500
This is Air Frame only. There is two servos in the tail that i will leave in the plane but you will need to add a throttle servo and aileron servo. The covering will need some attention in areas but

Traxxas Stampede VXL
traxxas stampede with new leopard brushless system...... will come with battery and charger u will neeed rx/tx....... can include tqi for 30.00 more feel free to call 843-246-3300 165.00 s

STINGER 40
This plane is getting sold MINUS: ENGINE, RECEIVER and FLIGHT PACK. It will have all the servos in the plane and wing. If you have any questions please email.

Traxxas Rustler VXL
traxxas rustler vxl like brand new only ran a few times...... tons of rpm upgrades has new trackstar 60a esc and 3300 kv motor...... this thing is super fast on 3s...... u will need rx/tx and battery

Saito FA-72 PARTS FREE SHIPPING
hi, here are a bunch of good Saito 72 parts for sale! 1> crankcase with bearings (it has a tap in it for smoke I guess, but it was done right!) 1> good straight crankshaft 1> good cam shaft w

HiMaxx 2808-980 Brushless Motor, NIB, Free Shipping
New in Box, HiMaxx Brushless Outrunner, 2808-980. 100 watt motor for 9 to 20 oz planes. Includes two stick mounts, firewall mount, collet prop adapter and instructions. HiMaxx listed price is $45.

Byron Originals F-16
Up for sale is a Used Byron F-16 jet. This jet has been built, flown, and then stripped down to be totally restored. I have another one of these, and do not need two restoration projects. The fuse in

Wanted: Cirrus MS-747WB/M Servo sets and arms
These are the giant scale servo that have the 8mm output shaft. Looking for arms primarily, but will buy servos as well as long as they have arms on them! Thanks

O.S. Engines O.S. .40 LA Natural
This is a brand new (never run or taken out of the box) OS Engine, complete. Priced for quick sale. You will be very happy with what you get for the price you pay!

Top Flite Cessna 182 - 61
This is the Giant Scale Gold Edition.  The contents of the kit have never been unpacked.  I am willing to sell this at a personal loss but a savings to you.  This model can be purchased

Magnum XL-32A RNV
This is a brand new, never run or even taken out of the box, Magnum XL32/II (the improved version II) Rear Needle Valve RC Engine.  It has the following specifications:

HPI Racing Nitro Rush RTR
HPI Nitro Rush in mint condition. RTR with original HPI radio. Has optional aluminum chassis brace, Titanium turnbuckles, metal trans gears and HPI CVD's. .15FE has 7 tanks through it and runs excell

FW 190 WING SET/ with retracts
NEW in box FLY ZONE FW 190 wing with retracts .. all servos (ADD 10.00 for USPS shipping..)

World Models Tai Ji - 60 (Pattern)
I have a World Models Tai Ji 60. This is one of the best flying pattern planes ever made. It is powered by a YS-61 R. This is a very good flying plane with a great classic engine. The engine has l

Custom World Models P-51D Mustang - GS
I have a custom build World Models P-51 Giant Scale Mustang (80 inch wingspan). This is a great flying plane. It is powered by a Moki 2.10 which is a beast. This engine can haul this plane around

HPI Racing Sprint 2 Drift Sport W/ 2010 Chevrolet® Camaro®
CAR WAS USED VERY LITTLE . SELLING BATTERY'S INDEPENDENTLY IT IS 2.4 AND 4X4 RUNS GREAT

Skyshark RC P-40N Warhawk
New in the box will trade. 82~| ws.

Futaba 12FG
This is a Futaba 12FGA in mint condition. It has been used to program 2 planes, never seen the outdoors or been used for flying. It has no scratches or scuffs anywhere on it. Comes with the 2.4gig

Hangar 9 Pulse 125


Devo 12s with full telemetry and two 12ch receivers INCLUDED
DEVO 12S .with TELEMETRY and SENSORS and two 12ch RECEIVERS !!!!!!! perfect in mint condition, some scratch on the carrying case 12 Controllable Channel 2. Support helicopter, airplane and g

Airline disconnects bvm 5457


Airline-Retract & Brake
1 12ft purple 1 12ft grey 1 6ft clear brake line

Century Bell 222 with Hawk/Falcon SE V2 and OS engine
Up for sale is a complete kit for a Bell 222 helicopter with Hawk/Falcon SE V2 mechanism and an OS engine. What you see in the picture is what you get. I have put me

Futaba-9VAP Transmitter and receiver
The Futaba FP-9VAP (72mHz) defined state of the art when it came out. Many of the options found now on our more recent systems started out on this. This radio is packed! 9 channels of fun! You can f

two GENS 7.4 5000 MAH
TWO 7.4 V 5000 MAH 40C BATTERYS USED 3 TIMES EACH

RCEXL Opto Gas Engine Kill Switch FREE SHIPPING IN THE USA
***$12.95 or 2 for $25.00*** This device allows you to safely and remotely kill your electronic ignition equipped engine your transmitter.igniton system is Fiber Optically Coupled to isolate you

O.S. Engines O.S. VX-DF .46
This is a NIB OS 46-VRDF. Rear Intake Rear Exhaust. It was designed to be used in Ducted fans. If I remember correctly ( Been a while) this engine produce 8 lbs of thrust, @ 25,000 RPM, in an AeroJet-

Tunnel hull
This is a 3.5 tunnel hull boat .21 outboard size hull. I built and modified this hull to be a very fast, competitive, and fun hull design... It is 24" long, and weighs less than 16 OZS as is...&n

Great Planes .40-.60 fiberglass arf floats (new)
SALE...GREAT PLANES .40-.60 FIBERGLASS ARF SPORT FLOATS #GPMQ 1882 NEW IN BOX. This is the Great Planes almost ready to fly .40 size Float Set. FEATURES: Lightweight fiberglass construction, alrea

Parkzone Radian 480 Motor, E-Flite 30 amp ESC, Prop Combo
I am selling a Parkzone 480 motor, E-Flite 30 amp esc, foldable prop, and spinner combo. $45 plus $5 shipping

JR Single Stick Gimbal
Need a JR Single Stick Gimbal to restore my transmitter..Or a JR Single Stick Transmitter for parts or what ever... Thank you

Fuel Dot- Plug/ Filler Nozzle
Fuel Dot -Plug /  filler nozzle Specifications: Material--Plated Plastic Face 30mm / installation 17mm For Gas or Nitro methane $9.95 Each Shipping $2.99 for 1 or more. NO PAYPAL FEE

SuperTigre 45 ABC nice free shipping!
hi, here is a very nice Italy made SuperTigre 45BB ABC engine for sale. it turns over smooth has great compression and I put a new OS #8 glow plug in it. nothing is broke or drilled out on it, I clean

Selling all my large stuff and trailer
You guys know how much this stuff is worth, there is no need for me to list it here, besides I know I will not get anything close to that. Just tired of the stuff sitting here not getting used.

DLE 55-RA
Bought this for a P51 Mustang and decided not to build. Bought new from Tower Hobbies for 419.97. Will sell for $370 shipped. Thanks for looking!

Schubeler DS-94 HDT
Brand new fan, with used Neu 1521 2y and CC 110HV....$1000....obo New Venom 80amp ESC..............$80....obo New E-Flite 60amp ESC...........$60.......obo Used E-flite Delta V fan(some chips on

G-Made Spider
G-Made Spider with 2 Novak Goat Crawler systems. Built around three years ago. I have ran it a couple hours (maybe) went up and down the stairs a few times that's about it. 750.00......obo

DLE 30
Brand New in the Box DLE 30. Bought two and only used one in a Pilot RC Extra 260. Bought new for 284.97 from Tower Hobbies. Will sell for 240.00 shipped in the continental United States. Thanks f

MOKI RCS 215 cc Radial
For Sale: RCS MOKI 215cc 5 Cylinder Radial Scale Engine with Electronic Ignition I received this Engine as part of a package deal, does not appear to have been mounted or flown. It’s been started (ex

Super Tigre G-75 Ring
Brand new. Bought for a project and decided on a different engine. Paid 129.99. Will sale for $90.00 shipped within the continental United States. Thanks for looking!

Macs Products Exhaust System 90 Degree Adapter
Two new in the package Macs Products Exhaust System 90 Degree Adapters for 3/8~| ID Flex pipe. Fits O.S. 90 FS & SAITO 65 & 90.

Chip Hyde Passport 2m pattern airplane
I have one Passport 2M pattern plane for sale. It is designed by Chip Hyde and built by CA models. In very good condition. Note that the price is only for the airframe including the fuse, wings an

AeroWorks Katana 29% Rx Ready W/DA 50
I am selling a 50cc AeroWorks Katana with a DA 50, and Hitec 645 servos rx ready. Local pick up only. Thanks.

CMPro P-51 Mustang - 120
I am selling a CMP P-51 rx ready with a SPE 40, Robart mechanical retracts, Hitec 645 servos. Local pick up only. Thanks.

Fuel Filler- CNC Aluminum " REDUCED PRICE"
CNC  aluminum Fuel filler. Outside dia. is 30mm. Perfect for larger aircraft, Plus it looks real cool! Equipped with complete screws for convenient installation. $12.99 each  

DLE 20 PITTS MUFFLER
DLE - 20 20cc Pitts Muffler. Mounting holes 32mm center to center, exhaust port 11x21mm 40.99 plus shipping NO PAYPAL FEE

Drill Prop Guides DLE/DA/DLA-engines
Drill Guides for Multiple Props PRICE IS FOR 1 SIZE ONLY!! IN STOCK NOW!  Large Size --Suitable for;   DLE111/ DLE222   & DA100 and DA85  &a

Rxcel HD Power Switch
Rxcel Heavy Duty Power Switch with covered charge port. I HAVE A FEW LEFT!!! LET ME KNOW HOW MANY YOU WOULD LIKE. Save on shipping when you buy 2 or more.! New in package. $7.49 for one! T

DLE/DA/DLA Aluminum Precut Spinners
DLE/DA/DLA Pre-cut Pre-drilled Lightweight Aluminum Spinners -  All Brand New    "Limited Quantities!!!" 3"       &

SET OF MEDIUM SIZED PROPS
For sale, a set of medium sized props. S/B X442 M440 X640 X440 $ 90 shipped for all four. BG

RTF Hangar Nine 1/3 scale Piper Pawnee - DA100 - Tucson, AZ
Hangar Nine 1/3 scale Piper Pawnee Ready-to-Fly with the following: Desert Aircraft DA-100 Hitech Digital servos BoomaRC.com Digital switch with voltage and amp meter B

Acrto 32-4Electric Motor
www.actro.de german high end motor very powerful

OS Max 46 FX
OS Max 46 FX.Strong compression,smooth bearings(new) and no broken fins or oversize mounting holes add up to a engine that is in excellent condition. $79.50 plus $8.50 shipping in the US. Pay with p

Hangar 9 P-47 D Thunderbolt - 60
This Hangar 9  P-47 comes ready to fly after you install your receiver and battery...It has a OS-108 engine for that extra power..No shipping ...Will bring to the Weatherford Tx swapmeet next Fri

O.S. Engines O.S. VX-DF .46
This is a NIB OS 46-VFDF. Front intake Rear Exhaust. It was designed to be used in Ducted fans but can also be used with a prop. If I remember correctly ( Been a while) this engine can produce 8 lbs o

Novarossi BX21 SBK01 engine (Ron Paris Modified)
Novarossi BX21 SBK01 .21 racing engine *(New in Factory Sealed Box)* Legendary R/C engine guy Ron Paris had his hands on this engine a short while before his death. The engine was manufactured in 2

CMPro F4U Corsair - 120
This corsair is ready to fly with your batteries and receiver...Robart retracts and zenoah g38 engine with built in electronic ignition converted by Ralph Cunningham......Plenty of power...3 flights o

O.S. Engines O.S. .91 FX Ringed
Wanted... New-in-Box OS FX 91. Contact cphdrider@aol.com

Hangar 9 1/4 Scale Piper J-3 Float Cub - Complete
Hangar Nine 1/4 scale cub on Hangar 9 floats - complete, ready-to-fly. No damage, issues, problems. Hitec digital servos, 2 water rudder servos, Magnum 160 twin 2-cylinder, 4-stroke, with remote glo

Hangar 9 60 Size P-51 Marie Cowl
I have an impossible to find Hangar 9 P-51 Marie cowl for sale. $30 shipped anywhere in the continental US.

Align hirobo lepton airwolf
Here we have a black airwolf with hirobo mechanics has futaba s3150 on cyclic has 401 gyro futaba s 954 on tail hacker motor has nav lights has retracts call if interested 4046643113

Align T-Rex 600 dfc airwolf
Here we have a airwolf with align 600 dfc mechanics has spectrum 5020 servos on cyclic has 9254 futaba on tail has 3gx flybarless system has castle creations talon 90 nav lights call if interested 404

Align T-Rex 500
Here we have an align Md500e with guai 425 mechanics kde motor castle creations 75 amp esc castle bec 5 blade head 5 edge blades spectrum receiver nav light micro beastx Flys perfect call if intereste

goblin 630
Here we have a new goblin 630 call if interested 4046643113

super scale blackhawk trex mechanics
Here we have a super scale blackhawk with trex 600 esp mechanics 4 blade century head align 615 on cyclic 650 on tail killer nav system with landing lights scorpion motor castle creations 80 hv ice 2

Align T-Rex 500 tow defender
Here we have a 500 tow defender cyclic has Hitec servos align 520 on tail 3gx fly bar less align motor and esc navigation lights call if interested 4046643113

mikado
Here we 800 extreme yge 160 hv edge 813 mm blades 115 mm tail blades interested 4046643113

MD 500e
Here we have a beautiful MD 500e has trex 500 mechanics torque tube align 510 on cyclic 520 on tail align motor esc has a nice boy and nav lights call if interested 4046643113

Hirobo Dauphin2 - 60
Here we have acustom Ferrari dauphin futaba s9252 on cyclic 611 combo on tail electric start 4 blade head retracts painted yellowgreat show bird call if interested 4046643113

Hirobo Bell 222 -60
Here we have a hirobo bell 222 90 size custom paint 9202 all around mds 87 motor retracts great helicopter call for any questions 4046643113

ENYA 80 4 STROKE NIB
New in the box never run no fuel added CALL WITH QUESTIONS...  NO PEN-PALS THANK YOU. 973-271-1200 Thanks Bill

Hyperion EOS 1420i Balance Charger New
This is a New in the Box Hyperion EOS 1420i Net3 Balance Chrager with all the items that are in the pictures , I purchased this new and do not need it , I did remove it and plug it in to be sure it wo

V2 700E DFC night ready
750 align motor , 610 x 3 on cyclic , tail 650 Align servos... all black gears !!! kontronik 120 speed controller , the newest style Align main Blades and tail blades .. perfect regulators on blades L

Mystery diff.
Don't know what this diff is to but might be of use to somebody. $10 shipped in the US

Short course tires
These are for a short course truck. Unknown brand of wheel and tire. Hexes and tires are in very good condition. $10 shipped in the US

New 2.8 tires
Don't know much about these. They have been sitting on the shelf and I don't plan to use them any time soon. $10 shipped in the cont. US

Promotion!! Fly-Model Thunderbird 50cc 3D ARF
Top quality balsa/plywood contruction, perfect for both beginners and experienced pilots. Come with all hardware and accessories, engine and servo separate purchases. Colors: Red/Black (Blue/whit

Promotion!! Fly-Model Yak55 SP 50cc Sport-scale
Top quality balsa/plywood construction, perfect for both beginners and experienced pilots. Come with all hardware and accessories, engine and servo are separate purchases. Available colors: Green

YS Engines 1.20 FZ
carbon fiber tuned pipe with header for YS-120 engine. super lite weight , exc. condition, pipe length 19~|x1-5/8~| stinger length 4~| header length 10~|

Century Bell 222 (fuselage only)
Hello im selling my Century Bell 222 Fuselage it comes with the retracts install and already setup it also has HIGH INTENSITY LEDS so you able to fly the helicopter at night and the most valuable part

YS Engines 1.20 FZ
YS, F-120 engine parts..............complete engine , crank is froze in case.

Wanted motor mounts for a Hangar 9 Funtana X 50 ARF
Looking for a set of Motor Mounts for a Funtana X50 not drilled, I think the 40 size are the same also. Let me know. Vince

YS Engines 1.20 FZ
engine is a YS, F-120, and was just rebuilt and bench ran by Richard at YS motor Co on 3-3-14 engine has not been ran sense I received back from YS ........ engine is in perfect condition and has

Super Tigre G-3250
2 Brand new in box Super Tigre G3250 engines with choices of either b.c.m inverted or b.c.m Pitts mufflers

Moki 1.80
Brand new in box Moki 1.80 with choice of slimline inverted Pitt or Macs products tuned pipe mufflers

Great Planes F-86
New in Box Great Planes F-86 Micro with AnyLink. $105 shipped

Associated SC10 4X4
I reversed the battery side so that I could run a 3cell in it. the belt clicker, and spur and belt plastic coverings are brand new. I'm running a 550 size 4pole 5.5 turn motor. a hobbywing 120amp esc

2 spektrum ar400
Looking to sell or trade four spektrum ar400 receivers . Looking for ground rcs or related items such as 5b parts crawler parts drifter parts buggy truggy truck and so on.

Top Flite P-51D Mustang - 60
Top flite P-51D kit, 65~| wingspan, .60-.90 two cycle, .90-1.20 four cycle, $125.00 plus shipping to lower 48. contact: chestervw@aol.com

MCD race runner
Hello I have mcd race runner comp car  built chrome engine all is new and un used also has wrap around tuned pipe it is chrome as well never run just built, all is new and up for sale.

E OFNA Ultra LX Comp
I'm looking to sell or trade my Ofna ultra comp buggy that was converted from nitro to electric. Looking for a trade more than a cash offers but all is welcomed. (773)567-6453

Desert Aircraft DA-85
I have a brand new, never used, never put a drop of fuel in this engine. Ive had it for 10 months. I never even mounted a muffler to it. I have the original muffler gasket that it comes with along wit

Sebart SU 29 2.6m airframe
Sebart Sukhoi 29 100cc 2.6m/102~| 35% $750 airframe only / shipped more pics here.. http://youtu.be/n0kObzrXfFU

Great Planes Reactor GP/EP ARF 84.5"
Right elevator boroken. stab good. www.flyguyrc.com or $150.00 air frame only Great Planes Reactor GP/EP ARF 84.5~| Wingspan: 84.5~| (2140mm) Wing Area: 1556 sq

Desert Aircraft DA-50
This is a good used DA 50 with no issues. The ignition was replaced with an aftermarket one compete with a hall sensor conversion to work with all DA engines. Engines starts easily and runs reliably

t-connector Male and Female set
T-connector / Deans Male and Female set $2.00 per set $3.50 2- sets $8.00 5-sets

Kangke Monocoupe ARF - .91
Selling my Monocoupe with a CRRC 40cc gas engine with RCxel ignition. The landing gear was pulled out on a bad landing but repaired and flown after. Wing tip has been repaired also. Still ranks 7.5

BO - 105 BRUSHLESS W NAV LIGHTS by Ikarus
WELL BUILT SEMI SCALE  BO - 105  BY IKARUS.  IT IS A VERY UNIQUE MODEL AND VERY ENTERTAINING TO FLY IN SCALE FASHION.  VERY STABLE  FUSELAGE IS PLASTIC.  PAINT IS ENAMEL.

JST connectors Male and female 1 set


Dave Patrick Models Piper PA-18 Super Cub ARF - .90
THIS IS BRAND NEW NEVER FLOWN ALL BUILT HAD A OS 160 TWIN BOLTED ON IT BACK IN THE DAY AND ENDED UP SELLING THE ENGINE AND PUSHED PROJECT TO THE SIDE IT IS IN FLAWLESS SHAPE NOT A SCRATCH HAVE ORIGINA

Dave Patrick Models Piper PA-18 Super Cub ARF - .90
THIS IS BRAND NEW NEVER FLOWN ALL BUILT HAD A OS 160 TWIN BOLTED ON IT BACK IN THE DAY AND ENDED UP SELLING THE ENGINE AND PUSHED PROJECT TO THE SIDE IT IS IN FLAWLESS SHAPE NOT A SCRATCH HAVE ORIGINA

Cable Plug Holder
Cable Plug Holder Please specify clear or Random colors 20 @ $5.00 Clear is temporarily out of stock. Sorry.

Composite-ARF Edge 540 2.6 meter wings
These wings are in perfect shape no repairs and dont appear to be used at all. If you are interested give me a call or e-mail we can talk price on what you need the front wings i want to keep as a set

65 wingspan aerobatic
This is a extra 300s 90 arf kit partially built. Come with a new SK 90 nitro motor includes carburetor and pipe. Would like local pick up that this thing is way too big it's got a 65 inch wingspan sti

Hangar 9 AT6
Wingspan: 67.5 in (1714 mm) Overall Length: 48 in (1219 mm) Wing Area: 706 sq in (45.54 dm²) Flying Weight: 7 - 8.5 lb (3.17 - 3.85 kg) Engine Size: .60 - .90 2-stroke, .82 - 1.

Razor knife
5 for $3.00 10 @ $5.00

Three TP 1010C chargers/TP210V balancers
I have 3 TP 1010C chargers and 3 TP 210V balancers for sale. All are in absolute perfect condition. All of the specifications and manuals can be seen and downloaded at the ThunderPower website.

RX Switches HD JR & FUT
PRESENTLY OUT OF STOCK ON THE JR. Please specify which one you want Futaba or JR. Mix and Match specify in offer. 1 @ $9.00 2 @ $16.00 3 @ $21.00 Are you working.

Zenoah G-26 Marine
Brand new in box Zenoah G260PUM marine engine with WT-644 carb. Never taken out of box.

Spektrum DX7
I have a mint Spektrum DX7 that I got this in a lot of cool Rc items I from an older gentleman who was a great craftsman, I wanted his airplanes and electrics and already had my own DX7. I honestly do

JetCat ECU and fuel Parts
Here are some JetCat plugs and New Turbine to ECU cable, along with 2 filters (used) and a Fuel Valve + 15' of gas tubing $30.00 I pay the shipping

Box of New Deans Connectors Male and Female
Here is a Box of Deans connectors male and female $15.00 Free shipping

Laser 200 EP
For Sale is a Carl Goldberg Laser 200 EP 45 in wingspan It has a Rimfire 35-30 motor with speed control Hitec 65HB servos No Battery or receiver. The left wing tip needs minor repair (see pic)

E-Flight Plugs and High Amp Wire + watt Meter
Here are a number of plugs and 2 different sizes of high amp Battery wire, along with MX8120 watt Meter $60.00 I'll pay the shipping

Spektrum AR6210 Rx's w/Sat's
I have 2 Spektrum AR6210 Rx's with satellites that I have sitting around. $55 each shipped lower 48, or both for $105

Futaba 9CAP 2.4Ghz Air
9CAP, TX With FRsky 2.4Ghz module, Campac and an Frsky 8 ch 2.4 receiver(NIP).

Sirius Square wave Quick charger w / extensions
Here is a Sirius NiCad charger that will charge your TX and flight packs in between flights I bought this new and it is one of the finest chargers I have ever used ( originally cost $300 ) comes with

Hitec HS-625MG
I ALSO HAVE THE FOLLOWING: 1 EA FMA PS705 MBB 80 OZ $25.00 1 EA FMA S-355 70 OZ $25.00 1 EA JR RACING 2590 85OZ $25.00

Losi micro Esc/rx and servo. 27 MHz
Losi 27MHz AM ESC/RX & 5-wire Servo! Crystal set is Included. What is in the picture is all that is included. Shipping to US $20 shipped in the cont. US only

CMPro Yak-54
NEW/UNASSEMBLED YAK..FIBERGLASS FUSE..THERES A SMALL INDENTATION IN THE LEFT WING COVERING & WOOD BENEATH IT..A QUICK/EASY REPAIR...BOX IS LARGE..I'LL SHIP AT YOUR EXPENSE..48X19X13 AT 20 LBS.FROM 087

Giant scale P51 retracts
11in. Height. New cylinders. Mechanical tail wheel retract. Price firm. Will consider 50 cc airframe in like condition. All gear is Robart

S BACH 30 CC CANOPY
GREAT CONDITION 30 CC S BACH CANOPY FROM THE NITRO PLANES ARF VERSION..ONLY DAMAGE IS WHERE I PULLED MY PILOT OUT OF IT & IT PULLED UP SOME OF THE FOAM BOTTOM....(EASY FIX )

S BACH 30CC COWL
THIS IS A BRAND NEW COWL FOR THE NITRO PLANES 30 CC S BACH CUT OUT FOR THE DLE 35 RA MOTOR OR THE 36 CC PTE MOTOR WILL ALSO WORK. COWL HAS NEVER BEEN IN AIR CAUSE I LEFT IT OFF DURING BREAK-IN...COMES

Hangar 9 Sundowner
Im selling 2 airplane fully asmbly just add a receiver First airplane is a World Model Midget 60 Mustang with a OS 91 Macs black pipe Tru Turn spinner. This is NOT brand new but never been crashed. Th

Top Flite P-51D Mustang - 1/5 cockpit kit
Hi I have a new in the package Top Flite P-51D cockpit kit part no.TOPQ8406. Thanks for looking. ***FREE SHIPPING in the USA*** Below are some specs on what is in the kit: This is the Top Flite Sc

Chip Hyde Double Vision ARF - 1.6, DA 50
Up for sale is a Chip Hyde Double Vision with a DA 50 Rear intake/ side exhaust engine and Pitts style Smoke muffler. No smoke system installed. Elevators and ailerons are JR 8411 driven. Rudder i

JN-4 Jenny Giant WW1 Biplane
This is a Maxford USA JN-4 Jenny...It was flown a few times with a saito 180...Not enough at 3400 feet...I will be selling  complete less engine....I have a second one that flies great with a 50c

Byron/Ironbay Mechanical Brake set
Hi I have a Byron/IronBay Models Mechanical Brake System for sale it is still new in the package still sealed. Thanks for looking. ***FREE SHIPPING in the USA*** 

Peck-Polymers PP-40 Genesis Wing
Rare Peck Polymers Genesis flying wing glider kit. Could easily be made into a great electric flier. Please note that this is a kit and not ARC. 59~| wingspan 10-12 oz weight 2-3 channels FREE

Great Planes Extra 300S 1/4 Wagstaff ARF - 1.60
For sale is a wing set for a Great Planes 1.60 Patty Wagstaff. These wings are in good condition. No crash damage. Only minor hangar rash. I also have a rudder and 1/2 of a rear stab with tubes i

Thunder Tiger GP 07
Thunder Tiger GP-07 rc plane engine. Comes with everything in photo. Has had one tank of fuel ran through it. Practically brand new. Runs Great. Did try to modify muffler to fit my plane it has JB Wel

AeroWorks Ultimate 3d Bipe Dle-55RA Biplane
Need to sell this Aeroworks ultimate...Great shape....Flys great too.This is ready to fly except batteries and receiver.New DLE-55RA...$500 without engine..$750 with engine...Call first for possible&n

Hobbico Twinstar 25 Twin ARF
This Twinstar is a prize !!. All upgraded hardware and tires. I also put an adjustable Y-harness on the throttle servos to more easily sync the engines. NO.. IT DOES NOT HAVE RETRACTS. Two bran

Cermark F-16 turbine model Falcon
This is a complete airframe with landing gear-heat tube and fuel tanks...Needs turbine-servos and misc...Bottom of fuse had the gear pulled out...This has been refiberglassed..Looks ok....This was to

Powerbox cockpit SRS NIB!
For Sale is my NIB powerbox cockpit only removed to update to the newest  version update!  PowerBox Cockpit SRS (Serial Receiver System) Features: • For Spektrum and Jeti sat

Thunder tiger GP 61 High Speed Needle Vavle
I am in need for a Thunder Tiger GP 61 High Speed needle Vavle.. It is  for the older GP 61 carb with the air bleed hole in the front.and NOT the newer carbs that has the needle vavle which is an

Troy Built Models Shokjet Tiger jet Turbine
Looking to sell my TBM Shockjet....This baby has 2 flights only...It comes complete less receiver...It is powered with a Ram500 Turbine with very little run time...It was updated with the newest

Dave Patrick Models Ultimate ARF - 1.20
I am selling my Dave Patrick ultimate to fund another project, has a Moki 1.5 engine with an apc 18-6 prop, hitech HS5645MG servos for the tail and futuba 3010 in the wings and an on board G

Losi 5ive 5T Roll Cage
$110 shipped - Firm I have a change in plans on what I want to do with my Losi 5ive 5T so here I have my extra roll cage for sale. Please note: I will dismantle the roll cage to make is easier t

Hypersonic A123 charger and three Fromeco A123 batteries
A flying buddy of ours passed away recently and we have agreed to sell all of his RC airplanes and equipment for the sake of the family. If you have any questions please feel free to contact any of u

NGK 5812 CM 6 SPARK PLUGS,DLE ENGINES AND MORE
THESE ARE NIB NGK5812 CM6 PLUGS I JUST HAVE TO MANY AND NEED TO CUT BACK,BOX OF 10 SHIPPED TO YOUR DOOR IN LOWER 48 FOR $45.00 these fit dle and many other gas engines.

Futaba 9CAP PCM Air
A flying buddy of ours passed away recently and we have agreed to sell all of his RC airplanes and equipment for the sake of the family. If you have any questions please feel free to contact any of u

Meister Scale P-47 Thunderbolt
Giant Meister P-47 Excellent like new condition.. I have built a few of these, built solid and fly's great, powered with a Quadra 100cc.. Two piece wing with heavy duty C/J retract mains, Robart tail

Sig Somethin Extra
THIS IS A VERY GOOD PLANE, , ,  A 40 MVVS MOTOR, ALL HITEC SERVOS,CHARGING JACK,, BASICALLY JUST ADD YOUR RECEIVER AND BATTERY  AND FLY, I DECIDED TO GO GAS  IT HAS BEEN STORED AND I HA

Lanier Stinger - 60
This is an arf. 60 size Glo motor all Hite servos has been hanging for about a year cause I have been flying gas. Just add your battery and receive and fly .Some of the star decals have came off and h

Thunder Tiger Raptor 50 V2
Raptor 50 Titan in Century(Fun-Key) Hughes 500e fuselage. OS50 Hyper, Outrage muffler, GY401 gyro, Thunder Tiger 620mm Carbon fiber blades, Futaba S9252 on tail, JR DS821 on throttle, Spektrum DS821

450 Size fuselage
450 size AS350 Tiger fiberglass fuselage. Looks to be RC aerodyne Tiger model. I installed Trex 450 and flew it a couple of times. No crashes, in like new condition. Body only, took Trex out.

poulan 30cc gas engine ,free shipping to lower 48


giant stinger with g62 with pitts muffler, reduced price will trade
this is a kit built giant stinger with a like new g 62 with pitts muffler and cup mount and spring starter,it has been flown about 6 times , no crashes or hard landings or prop strikes, has less than

world models blue max with sato 56 lower price
THIS IS A WORLD MODELS BLUE MAX WITH A VERY GOOD SATO 56 MOTOR WHICH HAS BEEN RAN VERY LITTLE AND FLOWN VERY LITTLE, I BOUGHT IT NEW AND HAVE HAD IT FOR A WHILE, IT HAS BEEN STORED MOSTLY BUT IN EXECL

Airworld P-51D Mustang
Airworld P-51 Mustang RTF Brison 3.2 (52cc) Gas engine Retracts on main wheels...tail gear is fixed robart Airtronics servos Pilot is installed THIS IS A PICKUP ONLY....NO SHIPPING

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo 3000 mAh and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. If you would like only one inser

Madspeed Drift King 1/10th scale


New Losi 8 1.0 Tuggy A-arms full set
I have a full set off nip A arms for the Losi. 8 truggy 1.0 Thanks for looking

JetCar P-100RX
JetCat P-100 RX. Less than 2 hrs (6 flights and some ground runs) Just back from JetCat to have all the software updated and full check up. PayPal add 2%. US shipping paid.

Balsa USA 1/4 Fokker D VII
Balsa USA 1/4 scale D-7 new in box! $250 plus shipping! Firm! No Trades!

Balsa USA Piper J-3 - 1/3
1/3 scale J-3 with Aileron Kit and scale wheels! $450 plus shipping! Firm! No Trades!

Yellow Aircraft P-40E Warhawk
A ~|YELLOW AIRCRAFT P-40E WARHAWK~| FOR SALE. THIS IS THE ALL FIBERGLASS 86~| WING SPAN WARBIRD WITH DUAL CYLINDER YELLOW AIRCRAFT RETRACTS. NICE DESIGN COCKPIT INSTRUMENTS, & PILOT. FLAPS, THREE BLA

AvioMac 70cc Twin Gas
B&B Mufflers, ignition box included, runs EXCELLENT! Never crashed! Over $900 new. No Trades, Shipping in US only! $400 + Shipping!

AeroWorks Sport Cub S2
Selling for an older friend of mine who has decided he can no longer handle the bigger planes. Aeroworks 50cc S2 Sport Cub This is a REALLY NICE cub, really high quality and all the best compone

NitroModels falcon 120 used
This is the orange version. Need work on the landing gear areas. I was going to use it on a small turbine but have 2 other planes that I can go with. can post pictures later. but since they stopp

Spektrum DX9
New in Box DX9.  I had d a store credit with ExperienceRC and wanted to convert to cash.  It is new and un-opened, delivered to my house 3/6/14.

Desert Aircraft DA-100 w/mufflers
Selling this for a friend, this is the last DA I have to sell. DA 100 with mufflers and ignition. This was running when I took it off the plane this afternoon. Please look at the pics the ign

BVM Bandit Duro struts /3 w/collars
Includes strut collar for brake lines on mains Set of mains and nose gear. Main strut tubes may need to be replaced. Mains 4-5/16" top to center of axel. Nose 5-1/2" top to center of axe

Jet Hangar Hobbies F-86 Sabre


BVM side mnt servo tray


Jet Hangar Hobbies F9F-8 cougar
New in box SHORT KIT , but looks like the formers and ribs have been already cut . and templates included. Box: 15lbs 51 x 17 x 14

BVM glue mix nozzle long/2
do not need

Spektrum DX7
Spectrum DX7 transmitter. Just back from Horizon Hobby for a check up before the next flying season, they updated it with the latest version of the firmware and installed a new battery. The radio come

Super Bandit NG flex arm
Bought as spare did not need

Buer ME- 262 NIB KIT
NEw in box. 1/6 scale ws: 81~| lgnth: 69.5 for 5~| d/f edf or twin turbine. Foam cores pre sheeted and great rare german kit. Great airplane to pick up while attending Florida jets.

Jet Hangar Hobbies Dassault Mirage/Kfir
Short kit. Has templates as shown in the box.

TREX 450 PRO DFC BNF
Hello. BNF TREX 450 PRO DFC in excellent condition. Never crashed or landed hard. 50 flights. All stock except KBDD orange tail blades. EC3 connector. Comes with: AR7200BX flybarless unit. Torque

JR FM receiver crystals
I have 2- JR Receiver crystals, both are channed 51- will sell and ship for $ 15 each.

Hitec Neon SS FM
Hello, I have a 3 channel Hitec Neon radio, transmitter, receiver(Hitec HFS- 06MT -5 channel) , NO SERVOS,  channel 37, uses dry batteries. First $ 30 takes it including shipping i

Kyosho Space Walker
I am selling my Kyosho Spacewalker, about a dozen flights, comes with Evolution .46 R/C with Perry carburetor, all Tower servos, just add your receiver and receiver battery and go. A sweet flyer, floa

Sig Rascal - .049
 READY TO FLY, Tower mini servos, 700 mah r/x battery Hitec receiver, channel 54.  Thunder Tiger .07 r/c new engine and muffler. Email me if you have questions. Pick up price only.

Marutaka Cessna Bird Dog
Hi, selling my Marutaka Cessna Bird Dog, ready for your favorite covering/finish, 88 inch 2 piece wing, fiberglass cowl, landing lights (Ram) and interior detail. I cannot ship due to size. Pick up pr

Concept 30 Helicopter
Nice original Concept 30 Helicopter with Futaba FP-T5NLH FM radio and receiver.   This could be a vintage collector or you can fly it.   It is ready to fly.  Just add Nitro!

Wild Hare R/C Edge 540T ARF - 50cc
Edge 540 RC Airplane made by Wild hare. 84" wing span. Bind and fly! This plane was flown very little - never crashed and in excellent condition Includes: Desert Aircraft DA 50cc gas engin

Habu 32 Pnp Mega motor electric brakes & retracts tams struts
This is a great flying habu 32 with mega motor and stock fan. Electric brakes with retracts and tamjet struts. All Hitec servos. 8s power system. CC 100 amp esc. No rx or battery

Mrc super brain 989 temperature Probe needed
Looking for a temp probe for above charger There must be somebody who has a charger that doesn't work

1/4 scale Pulling truck


1/4 scale Pulling sled


Twin Engine aluminum custom Savage Truck


Big Block Nitros and extras


Magnum XLS-46 PRO BB ABC. SECOND PRICE DROP!!
PRICE DROP!! For Sale is a Magnum 46 Pro SE engine with muffler and operating manual that's made by Thunder Tiger in Taiwan. The engine turns over nicely, has good compression and the bearings feel sm

Hangar 9 P-47 D Thunderbolt - 60
Hangar 9 P47 thunderbolt 60 for sale. This started out as the silver no gut no glory scheme but I repainted it. I lightly sanded the ultracote then primed the surface and sprayed with Krylon Olive dra

O.S. Engines O.S. .40 FP
OS 40 FP Engine in very good condition, looks good...runs good. $65. shipped.

1960's Sterling Mighty Mambo
Ready to build, wood is in excellent condition.

K&B .40 R/C Ball Bearing


5 New 6' rolls of Monocote..3 cream, 2 Burgandy
New-unopened rolls. $65. takes them all...shipped.

Mutiple Transmitters in good usable condition.
Local pick-up.

Feather Merchant
Feather Merchant Old Timer by Lehmberger Enterprises. 72 in. span. For 19-29 glow engine. Wood and plans in excellent condition and ready to build. Complete kit. Will trade for another old timer as I

Tru Turn 6" Ultimate spinner
Tru Turn 6 inch Ultimate spinner for sale. Highly polished. Includes solid back plate and new in package lightened back plate. This spinner sells for $237. Backplate for $69. Drilled for DA150-17

BJ Craft Episode
Airframe only.  Used for one season and in good shape. Call or text direct for faster response time. Buyer will pay for shipping. $1200.00 Garrett 281-924-8342

SEAGULL D520 DEWOITINE
NEW/UNASSEMBLED ARF..70~|WINGSPAN,1.20 SIZED AIRFRAME. INCLUDES MECH.RETRACTS,PILOT,SPINNER,FLAPS ETC.. I'LL SHIP INSURED THROUGH UPS AT YOUR EXPENSE..BOX IS 16LBS 48LX21WX11T FROM 08721 NJ...THANKS

Seagull Decathlon 120
I CANNOT SHIP THIS AIRPLANE - PICK UP ONLY! Engine mounted, Cowling mounted Cockpit, painted with texture paint, with pilot. O.S. 120 Surpass Pump - AS IS - Needs to have valves adjusted. Spinne

Top Flite P-40 ARF Sierra Retracts, and Misc.
PICK UP ONLY or I CAN MEET YOU WITHIN ONE HOUR OF 49230.  Top Flite P40E ARF Package Pick Up Only - Or I will Drive within an hour of 49230 I also work in the Detroit area and deliver there

CMPro P-51 Mustang - 140
NEW/UNASSEMBLED...LOCAL PICK-UP PREFERRED..I'LL SHIP IT INSURED THROUGH UPS AT YOUR EXPENSE...BOX IS 18 LB. 58LX20WX14T SHIPPING FROM 08721 NJ...THANKS

FW190 Holman wood parts & foam cores
New parts as shown, fuse formers etc. Also have wing foam cores new, included or will seperate.

Covering tools
For Sale three items together: 21st Century Covering Iron used once, Top Flite Trim Seal Tool used frequently but still works, and a Top Flite SmartStripe stripe cutting tool with extra drums. I am

heavy hub prop nut
HEAVY PROP NUTS USED TO BALANCE TAIL HEAVY PLANES.  ALL ARE USED IN EXCELLENT CONDITION HEAVY HUB PROP NUTS PRICED EACH AS NOTED IN PHOTO FROM LEFT TO RIGHT  ALUMINUM 1/4-28 THREAD W

Ziroli P-51 Mustang Parts
For sale are the Ziroli plans, Canopy, cowl, belly scoop, exhaust ports and spinner. Asking $220.00. All parts sold through Ziroli is $320.00. So 100 bucks off total. All are brand new, in ex

Hanger 9 Tiger Moth 20 cc
This is a New Hanger 9 Tiger Moth 20 CC Model this sale is for the assembled Model only , No servos or engine installed will come with all the parts that were in the Kit.The wings can be removed wit

Carden 118" Extra 260 Kit - value price reduction
N.I.B. Carden Extra 260 - 40% kit. If more information is needed please go to their site, WWW.Carden Aircraft.com There are four boxes to be shipped. Shipping from my Fedex insured business a

MRC Thunder Streak Hydo
For Sale is a vintage MRC Thunder Streak Hydro ~|Almost Ready to Run~| boat. The boat is 28.5 inches long, and has a beam of 10.4 inches. This is a ABS plastic hull and runs on 2 RS 540 motors which

CASTLE CREATIONS PHOENIX HV 85
FOR SALE USED ONLY 5 TIMES CASTLE CREATION PHOENIX 85 HV LIKE NEW CONDITION!!! >>>>>>>>>>>>>>>>>>>>> $110.00 or best offer!

Tower Pro MG-995 DIGI HIGH SPEED
I BOUGHT THESE THOUGHT THEY WERE FAST ENOUGH, I NEED FASTER ONE'S. UNUSED NEVER MOUNTED ,JUST TRYIED ONE OF THEM ,THEY WORK FINE JUST NOT GOOD FOR MY APPLICATION. They are high speed digital ball

Balsa USA Stearman - 1/3
This was marked sold a few weeks ago pending funds. The buyer has just received word of a conflict with job duties taking him out of country. So..... It is now FOR SALE again. I have plenty of pics. D

Spinks Akromaster Kit 90" WS
Air Tech Spinks Akromaster Kit New in Box. This is a large plane with a 90~| Wing Span. Features built up fuse w/ Foam Wings. Everything is there, Clear Canopy, ABS Cowl, ABS Wheel Pants Formed Alumin

Fly Eagle F-18F 120" Long Twin Turbine - RTF
READY TO FLY Turbine Jet F-18F 1/6th Scale, Twin Version (120 Class): This is not the honeycomb version. Includes the following: * Full Airframe * Gear * Air System * fuel Cells * Tail Pipe x 2

A-JUSTO-JIG FULL HOUSE WING & FUSE KIT
FOR SALE - Lightly used A-Justo-Jig Full House Wing and Fuselage Jig. 100% complete - in box w/ instructions. Improved model which can handle a 72" one piece wing.

Team Losi 8IGHT-T 2.0
***I have this for sale locally and reserve the right to end this ad early. I have a complete RTR kit Losi eight 2.0 nitro Truggy. This is this years model(2013). I have run a tank through it. I did

YS F-91AC like new RC motor
I have a like new YS F-91AC  engine for sale. It is super charged and is hands down the strongest motor out there in the 91-120 class no problems doing verticals with this. It was used very little and

F-117 Stealth kit
The F-117 Stealth Fighter Kit is a front motor mounted 1/8 scale, high performance, propeller driven sport plane that resembles the actual aircraft. The laser cut design, interlocking parts and easy t

CMPro Katana S 140 price reduced
Assembled with NEW Hitec servos and receiver and new battery pack. Hitec 625 on throttle, 635's on elevators, 645MG on rudder, 605's on the ailerons. Never flown. Metal spinner already cut. Switch/cha

Top Flight DC-3 landing gear
I'm selling a NIB set of DC-3 landing gear for the Top Flight DC-3/ 60.00 takes it

Misc, collector glow engines
I am offering these as is. I don't think some of them have ever been run. I do think all the parts are there. What you see in the picture is what you get. 1: K&B 61 pumped w/muffler 2: OS 90 FS

Team Losi Aftershock
Looking to sell or trade my losi aftershock roller, comes with forward only trans. Jr servos and lower aluminum a arms all around. Opened to all offers cash or trade.

Fuel Tanks and Spinners
Big lot of parts, most are new in the package. Here's the list. $80 for the entire lot. Payment via Paypal. Shipping via USPS. Fuel Tanks 6 oz Kraft 6 oz Hayes Sullivan SS-8 no 439 S

AIRCRAFT INTERNATIONAL 3w150 TOC engine
Well, I think I made my mind up, I am considering getting out of the 40% planes, and wanting to get into a 35%er, got a good deal on a nice airframe, and my style of flying seems to be more fast/quick

90mm edf fan and ESC setup with a bunch of servos and two main landing gear
Well I finally retired my freewing Eurofighter, the front nose gear hit a hole on takeoff and tore the wood supports out and bent the front gear,, I have had a ton of fun with the plane, and decided I

OFNA HYPER 10 SC 4X4
OFNA HYPER 10 SC 4X4 ,ROLLER ALL ELECTRONICS NEEDED,EVERYTHING PICTURED

SUPER CLOD CRAWLER KIT
CLODBUSTER AXLES ,MOTORS,SKID PLATES,TIRES /WHEELS ,EVERYTHING PICTURED

2 NEW RC DRAG BODIES
2 NEW RC DRAG BODIES

Tamiya TLT-1 Max Climber PARTS
A COUPLE CHASSIS ,TLT AXLES ,TRANNY




 
RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2014.  Privacy Policy
 
GET FREE RC CONTENT FOR YOUR WEBSITE

Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

Products Videos WattFlyer.com RC Classifieds

RCU4 | 54.211.231.221 | 0 | 1 | 04:20:49 PM EST | NC