RCUniverse Classified Ad Market Archive

Showing Listings No. 7201-7500 of 20000

   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67 
 
O.S. (OS) 65AX Engine NIB
Brand new, in the box OS 65 AX glow engine. Complete with muffler, documents, and decals.

Airtronics 94102Z (8 servos)
Here are 8 Airtronics 94102 servos. One of them has a broken mounting tab and one gear with a couple bad teeth. The other 7 work OK. These are the later version of the 94102 that have correct wiring

FlyZone Sensei Wing Mounting Screws
Here are the over priced and sometimes hard to find nylon screws for mounting the FlyZone Sensei (and others) wings. When I couldn't find any in stock anywhere I went straight to the manufacturer a

Super Tigre 61 with Muffler
Here's a really nice running ST 61. I have flown it several times and it runs and flies great. Includes muffler, muffler adapter, and muffler screws. No cracks, no scratches, just a nice engine with

Super tiger engine muffler
Early super tiger engine muffler. Swing type with stack, bolt through type. Fits super Tiger .45 to .51 has a 37 mm bolt space. Measure carefully , no returns. Asking 15.00 free shipping. In the U.S.

Duralite EXP LI-Manganese 4300mah 2 cell
For sale are four Duralite EXP LI-Manganese 7.4 volt 4300mah 2 cell receiver batteries in excellent condition. Always balance charged, never abused and always storage charged when not in use. These we

Duralite EXP LI-Manganese 2150 mah 2 cell
For sale are four Duralite EXP LI-Manganese 7.4 volt 2150mah 2 cell receiver batteries in excellent condition. Always balance charged, never abused and always storage charged when not in use. These we

ENGINE MOUNTS, Dave Brown, J'Tec
These are glass-filled, nylon engine mounts and two (2) J'Tec aluminum mounts, NIB Including: (3) DB, 1.20 Glass-filled nylon (1) DB, .30-.35 Glass-filled nylon

Jet Hangar Hobbies F-86 Sabre
I have a almost completed JHH F 86 with a JJ 1400 looking to trade airframe for a smaller F 16 or F 15 that would fly with my JJ 1400. prefer trade but will sell for 550.00 minus turbine, rx, batts.

JETI Telemetry Sensor Temperature MT300 EX
For sale are two JETI Telemetry Sensor Temperature MT300 EX. Both are in excellent condition and work great. Looking to get $35 each plus $5.00 shipping. If you purchase both I will pick up shipping.

JETI Duplex EX R3/RSW 2.4GHz Receiver & RC Switch w/Telemetry
For sale are six JETI Duplex EX R3/RSW 2.4GHz Receiver & RC Switch w/Telemetry. All are in perfect condition and work great. Looking to get $45 each plus $5.00 shipping each. I will make a deal on mul

JETI Central Box-200
***ONLY ONE LEFT***For Sale are three JETI Central Box 200 Power Distribution Unit's w/Magnetic Switch's. All are in perfect condition and work great. Looking to get $150 each shipped to the lower 48

Hangar 9 Beast
AIR FRAME ONLY TRYED TO FLY IT WITH A SAITO 84CC GAS BUT NOT BIG ENOUGH SO WILL BUT SAITO IN SOMETHING ELSE PLANE LOOKS NEW HAS FUTABA HIGH TURQUE SERVOS IN IT BUT WILL REMOVE AS WELL

ASP .52 S
This is made in China and is one of their better engines.. I build big, so I do not need this one.. The engine is brand new, never been on the bench, never had fuel into it.. still in the box, has

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. Much lighter and eaiser to manage th

Great Planes PT-17 Stearman
with a saito 150 glow futaba servos RTF

Artesania Latina Swift Virginia Pilot Boat 1805
Beautiful display model, all wood, Swift Virginia Pilot Boat. This is all wood with all hardware. Makes a great display model. Length 540 mm Height 460 mm Beam 110 mm $85 Free Shipping

Great Planes PT-17 Stearman
RTF WITH A SAITO FG-21 (1.26) 4-Stroke Gas Engine: FUTABA SERVOS Top Wingspan: 71.5 in (1815 mm) Bottom Wingspan: 69 in (1755 mm) Total Wing Area: 1466 ft² (94.7 dm²) Weight: 14-15 lb (6.35-

Quadcopter racer frame Carbon Fiber
Carbon fiber composite Quadcopter frame 250mm. Fabricated by protechcomposites.com  Frame comes new with new eMax power distribution board and flitetest standoffs blue kit. Plus one 20amp ESC. I

Desert Aircraft DA-50-R
Great Shape - only about 30 flights. Engine was ran with Honda Motor Oil all its life. Never any crashes or problems. Ran a 22X10 Prop. Engine comes with ignition. I also have Fromeco LIFE batte

Reduced Again 3W Bearcat
NEW PRICE! WAY BELOW COST! Last time for a reduced price! 3W Bearcat, South Vietnamese Air force RTF. Built and painted by Graham Buchanan Tiger Models in England. Purchased used from him a few

DLE 111cc
For sale is a DLE 111cc. It has about 1 gallon of fuel ran through it. The motor cranks easily and runs smooth and strong. The engine has never been crashed just upgrading to try another engine on the

GREAT PLANES REAL FLIGHT G4 R/C FLIGHT SIMULATOR
GREAT PLANES REAL FLIGHT G3 R/C FLIGHT SIMULATOR With INTERLINK PLUS CONTROLLER by Futaba. This is in excellent shape. Great simulator. Used only a few times. Like new.

GREAT PLANES REAL FLIGHT G3 R/C FLIGHT SIMULATOR
GREAT PLANES REAL FLIGHT G3 R/C FLIGHT SIMULATOR With INTERLINK PLUS CONTROLLER by Futaba. Real Physics 3D Flight Performance 43 aircraft to fly 12 flying skies with over 5000 square miles to expl

JR XP9303
JR XP9303 ... I have two of these... one H & one A/S version. I use the H for both heli's and planes. In my opinion, its the best all around radio out there. These are in excellent shape. comes with

JR CRYSTALS 72MHZ LOTS OF DIFFERENT CHANNELS
JR crystals ... ch 15 to 60 ... both Tx & Rx (Tx is black & Rx is gray) and DUEL CRYSTALS (the red ones) All of these are 72mhz ... nothing else ... $10 each All of my idems are guaranteed to

Jtec Radiowave Panzl 330
Jtec Radiowave 2.7M Panzl 330. Not fully assembled. Brave Heart 100 cc engine. Strapped to a board and cranked 1 time for a few seconds. Thats it.Never mounted to plane 1 Sail 27x10 prop. 8

JR RECEIVERS 6 to 10 CHANNEL PCM/PPM/FM
Prices for for one receiver .... without crystal. Crystals are 10 each ... there in another ad. FM RECEIVERS: 2 NER 226X FM 6 ch .... $25 each 1 NER529X FM 9 ch .... $30 each 2 NER 549X FM 9

JetsMunt VT80BL Kero Autorestart
NEW IN BOX ZERO TIME Turbojet Jets Munt VT80 Guaranteed thrust in ISA conditions: 80N (18lb) at 150.000 RPM Idle thrust: 4.5N (1lb) Idle RPM: 45,000 Si

Great Planes Giant Aeromaster - 1.8
Plane with dl 50 pitts muffler no servo's

AeroWorks Extra 300QB
Reluctantly Selling my Aeroworks 60-90 Extra 300 ARF-QB (quick build). Here are the details: Here is a link: http://www.aero-works.net/product/60-90-extra-300-arf-qb/ Aeroworks Extra 300 60.5~|

Nitro Fuel (unopened)
6 gallons CoolPower 30 Heli 2 gallons Powermaster FAI 80/20 1 gallon Powermaster 15% Stored in dark climate controlled conditions. Unopened. FREE must pick up in Monterey/Salinas area

Top Flite Cessna 182 ARF
I have a top flite Cessna 182, a seagull piper twin commanche with twin os max 46's, the 182 has a dle 30, both are r.t.f. there is a spare airframe for the twin commanche. I am letting all 3 go for 6

2-XPS 8 CHANNEL RECEIVERS
Here are two XPS 8 channel receivers. Both work great. I'm thinning my radio herd, one of which is the XPS system. It has been a great way to go, I just don't use them any more. I will have more recei

DX 20 FOR SALE
SPEKTRUM DX-20 TRANSMITTER. DOES NOT COME WITH RECEIVER BUT HAS EVERYTHING ELSE THAT CAME WITH IT. PERFECT CONDITION. USED TWICE. IT HAS BEEN SENT BACK TO HORIZON FOR ALL THE RECOMMENDED UPDATES. CUR

Carden Aircraft Extra 330S - 40%
Wings and Stabs from 40% Carden Extra Make reasonable offer

GRAUPNER POLARON EX CHARGER
I HAVE 3 GRAUPNER POLARON EX CHARGERS, NEW IN THE BOX. THEY HAVE NEVER BEEN USED. ALL 3 ARE SILVER JUST LIKE THE PICTURES. ALL LEADS ARE THERE THAT COME WITH THE CHARGER.

FOKKER D VI 1/4 SCALE
COMES WITH PLANE: 1.COMPLETE BOOK OF HISTORY AND KIT INSTRUCTIONS 2. 1 QT. SIG NITRATE 3. 1 QT. SIG SUPERCOAT 4. 1 32OZ SIG THINNER 5. COMPLETE INTERIOR 6.2 EXTRA PROPS 7. EXTRA COVERING 8. EX

Carden Aircraft Yak 54 - 37%
Wings and Stabs from Carden 37% Yak. Make Reasonable Offer

Electronics - DSMX, AR7000, ($40-$45) See Ad
Electronics: 2 DSMX Satellites $45 shipped for pair - one has about 6-8" extension and other I believe 24" and I will throw in a DSM2 AR7000 DSM2 in great condition with 6" extens

Navy Cat Turbine trainer
This is the latest Navy Cat version 3 carbon fiber airplane. It is ready to fly and includes a Jet Cat P-60 SE turbine with 6hrs of time on the engine. The airplane contains the latest control electro

Robart TF giant Zero retracts
I set Robart retracts for the TF giant Zero for sale or trade for good set of TF giant P-47 retracts Good condition, flown 5 times

Rare Yellow Aircraft F-15 ARF RTF with K140
For sale is my tried and true Yellow Aircraft F-15. This is the ARF version with a vet low hour K140 installed. All original Ya parts (gear fuel tank etc..) it is in good condition with very minor wea

AeroWorks 50cc Pitts Python
Selling my Aeroworks Pitts Python bi-plane. I am the original owner - lots of great flights with it - never a mishap or even a hard landing. A great flyer that is easy to take off, land and fly. It is

Hangar 9 Extra 260 - 35% PRICE CUT!!!
DA-100 MTW Cans smart Fly board remote kill switch 2 blade wood prop with spinner 3 blade composite prop with spinner Hitec HS-5955TG Titanium Gear Servos 2 for elevators 1 on rudder 2 o

Composite ARF Super Extra PRICE DROP
Composite ARF Super Extra 3.1M Plane by itself- $1000 Plane with DA-150 Greve Pipes -$1400 THE BAD- I bought 2 of these as a pair under the impression that they were both in good shape. Gu

Great Planes PT-40 wing kit
New,Great Planes PT-40 wing kit.Wing kit only!!! Plans and instructions show construction of the wing and fuselage. $49.75 shipped in the US. Paypal and money orders welcome.

AeroWorks ProX260 .46-.60
Excellent condition. Comes with OS 60 Gold Head, 5 servos, prop, tank Etc. Flies great just getting rid of glow. No receiver or battery. questions call 8048920446

Futaba R6014FS
I have (3) Futaba 6014's for sale. (1) is NIB and the other (2) are slightly used. All in great working condition. $125 for the new one and $80 each for the used ones.

QQ Pitts Python (ARTF)
Plane flys absolutely amazing! I am the third owner. It has been involved in multiple crashes. This was before I took ownership of it. When I purchased the plane it was structurally not air worthy. Bu

NitroModels Low-Wing Super Trainer 60
Wanting to buy, Nitromodels .60 size low wing trainer arf.

Futaba 18MZ
I am the second owner of this good condition Futaba 18MZ. Has some minor cosmetic imperfections here and there as it is used. Works flawlessly and comes with case and charger. Priced to sell!

Smoke mufflers for DA100/DLE111 & set of Flex Headers for twin cylinder engines
Smoke mufflers for DA100/DLE111 & set of Flex Headers for 100cc twin cylinder engines These are brand new unused. $140 shipped USPS priority mail, call text or email 314-256-9987 or ibcinyourc@ho

Garage Sale Ad!! Falcon props carbon fiber & German Beechwoods
Garage Sale Ad!! Falcon props Carbon Fiber & German Beechwoods ALL brand new in respective packaging. Call text or email 314-256-9987 or ibcinyourc@hotmail.com can send pay-pal invoice, will need y

SAVOX (LOT of 6) 0220MG High Voltage 13/111.1 @7.4 digital servos
Savox (LOT of 6) 0220MG High Voltage 13/111.1 @7.4 digital servos Servos savsv0220MG. brand new in Boxes / packages $155 shipped, call text or email 314-256-9987 or ibcinyourc@hotmail.com will need em

Byron New Muffler-mount for Zenoah G-62
This is a New G-62 muffler/mount that I bought years ago and do not need. It has been played with but never run. If you have never heard of these Byron mounts, they allow a large amount of adjustment

Byron Muffler mount for Mustang 50
Good used Byron Muffler Mount for the Byron Mustang 50 engine. I flew this a lot in a Byron P-47 but no longer have it. It may also fit other engines. Great for an infinitely adjustable mount and sil

Byron Muffler Mount for Quadra 50/52
I bought this Byron muffler/mount a long time ago and never used it. The inlet pipe is less than pristine but it will fit and work fine. These mounts are infinitely adjustable and are much better at s

PNP TamJets F-16/Turbine Jet Central super bee
PICKUP ONLY Reduced to sell! Videos: Engine run- https://youtu.be/gAve9GT6kK8 High speed pass - https://www.youtube.com/watch?v=cN9lUST3GUQ Inverted pass - https://youtu.be/-G2ODUj40Pk Landing -

Wingspan Models B-17 F/G 1/9th scale
I learned a hard lesson yesterday on my first flight with my beautiful giant scale B17. My landing approach I banked too sharp too slow and beat her up. I don’t really have the time to fix her so an

Murutaka 1/5 scale Bird Dog Windshield Set
This is a complete set. For quick response email scaledynamics@yahoo.com

Byron 1/6 Scale P47 Bubble Canopy
New! Made with .040 PETG clear and durable.. Length 16 inch x width 6 inch x Height 5 inch. For quick response email scaledynamics@yahoo.com

Byron F16 Canopy & Cockpit
New Byron F16 Canopy plus cockpit, seat back, dash insert and instructions. For quick response email scaledynamics@yahoo.com

Giant P-51 Exhaust set
Resin exhaust set for giant scale P-51 Mustang. One set includes 12 resin exhaust stubs. Good for 1/4.5- 1/5 scale Mustangs Will work with Ziroli P-51,H9 60cc Mustang Worldwide shipping is free.

ViperJet 250 Zeal Jets
Zeal Viperjet ( Carf type ) with all JR 8911 servos, Powerbox Champion SRS ( Futaba set up ). Electron electric R40Evo Retract and brakes with digital programmer/sequencer with touch screen. ( LG15

Raptor 50 RTF
I have a raptor 50 in new condition with PRO 50 h and muffler..engine..no crashes comes with pro blades gy 401 gyro..futaba 9254 tail servo.extra frame with clutch bell motor mount and aluminum head.

Align STQ 100
Align Superior Starter STQ 100 (for Helicopter) Feature Highlights: ? Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transpor

F-35 der jet
This is a brand new never been in  the air ready to fly with JETCAT P-120 turbine or no turbine up for sale (this is a hard to get plane ) With turbine and turn key $5000.00 dollars with out turb

BH Models Extra-300L 1.60
I have a brand new never flown BH Models Extra 300 with a new DL 50 in it. I started putting this together and got busy with other projects. I’m not going to finish this so I’m letting it go. The p

O.S. Engines O.S. .75 AX
OS 75 AX. With stock and ultra thrust pipe. Been sitting for a while, would put new bearings in it. 100.00 shipped.

Saito FA-91S
Saito 91. Good running motor with good compression 125.00 shipped

Wingspan Models B-17 F/G 1/9th scale
Power Class: Gas Class: Giant Category: Multi-Engine | Scale | Warbird Flying Skill: Intermediate Build Type: Full Build DIMENSIONAL SPECIFICATIONS Wingspan: 138.00 in

DJI Inspire 1 Ver 1
For sale DJI inspire 1 Ver 1 4 Batteries, 2 Remote Controllers,Zenmuse X5 Camera Two Remote Controllers Extra Props,a 2 Nvida Shield Tablets and Pelican Hard Case. Local pick up preferred....will t

Futaba R6008HS Receiver
This is the Futaba R6008HS 2.4GHz FASST 8-Channel Receiver. This receiver is switchable between regular and HS modes, per the Link/Mode button. **NOT compatible with the Futaba 6EX and 7C 2.4GHz Sy

Saito FA-72
Saito 72. Good motor with good compression. Has a couple of gallons thru it. 120.00 shipped

AeroWorks Yak 54 - 85cc
This is the Aeroworks 85cc Yak-54 ARF-QB It assembled and ready to fly (balanced) just install your receiver and go. DA 85cc engine and DA muffler with approx 1 gallon of fuel through it 4 Fro

BYRON MUSTANG 50CC
I have a Byron original MUSTANG 50 with low run time. Comes with new purr-power muffler and accessories. I can not find the two muffler screws but I am sure they are easy to find. I was going to use

UP3 VALAVE
I have a used UP3 VALVE that I no longer need. Sold the project. Shipping will be $12 to Canada and lower 48 States

Blade CP S
cps in good shap custum landing skids very nice and microheli blades comes with battery need to bind to spectrum trasmitter and extra blade and i have micro heli swash plate not installed 30,00 value

Electronics - DSMX, AR7000, Sahara Regulator, ($25-$45) See Ad
Electronics: 2 DSMX Satellites $45 shipped for pair - one has about 6-8" extension and other I believe 24" and I will throw in a DSM2 AR7000 DSM2 in great condition with 6" extens

Redwings Gryphon
For sale is a Redwings Gryphon RC Jet. This is jet slows down nicely for very trainer like landings. The large thick composite wings lend themselves to make an easy to fly air frame. This jet will ea

Bucker Jungmann EP
Here is a nice modified Ultimate ARF. I scratch built a new fuse from reduced Goldberg plans. This has the basic format of the Ultimate, but made to look like a Jungmann. The wingspan is 32.5 inches a

hostetler cessna 421c 27%
chance of a life time , to the best of my knowledge only a hand full in existence. scratch build from plans Hostetler Cessna 421c 27% ready for paint and final assembly. span : 133.25 ~| ,length

Top Flite P-51D Mustang - 1/5 RTC Fuselage
Ths is an ARC fuselage as built by Top Flite plus a few other items. The other items include a canopy, some misc wood parts, the stock fixed tailwheel, the air scoop, and a few more odds and ends. N

TURBINE powered FG 1/5th scale Porsche Carrera GT rc car
Up for sale is a Porsche Carrera GT 1/5 Scale with a SIM-JET TURBINE 1200 full auto. 12lbs ofthrust. Unbelievable custom built FG platform porsche Carrera GT with a Simjet 1200 turbine that's full

Desert Aircraft -170
I'm selling my low run time DA -170 engine . This engine brand new is 1695.00 and another 200.00 for the mufflers . I'm including it all, plus a set of exhaust headers that's another 250.00 . This

Great Planes Venus with Servos
Great Planes Venus 40 with Servos Plane is in good condition. HiTec HS-325HB servos all around. Can send additional pictures. No Shipping. Pick up in Parsippany NJ 07054 or Fair Lawn NJ 07410.

Megatech M-46 ABC
Mega tech .46 two stroke with muffler and glo plug. Good running powerful 46 engine. Runs every bit as good and as strong as an os, 46. This engine was bought new and has had about 2 hrs of run time o

BH Models Decathlon EP
Here is a nice ARF of the Super Decathlon airplane. This is made with light weight built up wood construction. This has a 49 inch wingspan and requires a AXI 2808/24 or similar size EP motor. Contact

Saito FA-91S
New in box saito 91. Does have the instruction but DOES NOT have the tools. 225.00 shipped.

Goblin 500


Ziroli Turbinator in 202 Jolly Rogers scheme
Ziroli Turbinator Professionally built and is ready to fly. Has JR servos and Hi-Tech. Has a newly refreshed M90 propane start from dreamworksrc. Nee action struts and air retracts. Just add your

SimJet SimJet 3000 AES Xicoy V10
Simjet 3000 AES updated to the latest Xicoy ecu Turbine has about 2 hours since bearings have been replaced and less than 30min on the new ECU update. May consider trade plus cash just let me know

Ultrafly Extra 300S RB
Here is a nice flying Extra 300 with Red Bull colors. The model is lightweight and has a balsa/lite ply built up wood construction. This has a 47 inch wingspan and has an Ultrafly H/12/09 .25 size EP

SUBMARINE neptune thunder tiger SB-1
Up for sale Thunder Tiger Neptune sb1 static diving submarine with less than 2 hours on it. Has been in the water 3 times, one Lake one pond. Will come in the original box, and complete with decals al

Radio Craft 100cc extra 300
100 size Radio Craft Extra 300 Da 100 with mufflers Jr 8411 servo's ailerons and elevator (4) Hitec 5735 on rudder Jr 4131 on throttle. Great flying plane. Add your batteries and fly. Never

8 PCS Slicone Transmitter Switch Caps
These are made out of silicone rubber and you get 4 long and 4 short Comes in Black, Green, Red , yellow, white Works with any transmitter $18 shipped for 8pcs

50 cc size fly Model
50cc size Fly Model MX2 55 Dle engine Hitec 5945 servos ailerons, Rudder and elevator (5) Throttle 4131 Jr servo. Ready to go just add your batteries. Great flyer, never crashed any questions

Goblin 500


Xicoy Spektrum Telemetry Adapter
I have two of these Xicoy telemetry adapters for sale. I used them with the original Kingtech Xicoy ECU's. This is an excerpt from the Xicoy web site, ~|Adapter to connect the telemetry data from al

P-51B Mustang - 40
A ~|40~| size P-51B, it was a Great Planes P-51D kit that I modified to be a P-51B. It contains a Aces of Iron Pilot, OS 71 4 Stroke and Robart ~|60~| size Mechanical retracts. Servo's are Futaba 3004

Spektrum AR12120 Receiver
I have one AR-12120 receiver with XT-60 connectors. This receiver was installed in a Jet but but was never flown. Paypal will be accepted.

New KBB / Radtek 45 hull undrilled
Brand new KBB / Radtek 45 hull that i never got around to working on, undrilled. The front sponson gel coat was damaged when i received it from another member here. I obviously I'm selling as is, the

Matrix Machine 1/5 A6 Intruder Landing Gear
Looking for a set of Matrix Machine Tool 1/5.5 A6 Intruder landing gear I believe this gear fit the old DCU / JetMart A6 kits

72" Marquart Charger and others
For Sale short Kits: EAA Bipe-80~|-$189.99 EAA Bipe-88~|-$199.99 L4/NE1/J3 Cub-129~|-$279.99 Flybaby-84~|-$189.99 WW1 Bristol Scout-97~|-$249.99 Miss Los Angeles-72~|-$209.99 Miss Los Angeles-

1/4 scale Jodel
Modeled after full size home built. entire model was stripped and re-covered with 21st Century and enamel paint. Was featured in Model Aviation on 'how to recover model'. Span 100~|, two piece wing, G

Hangar 9 P-51 Mustang 150
this plane is brand new still in box, i include, fuselage, cowl, canopy, elevator, rudder except wings asking $150 will not ship

JR PCM 10X Air
Still in great working and physical condition. NO CASE AT THIS PRICE I HAVE TWO 10X, ONE HELI, ONE AIR

KS 1090 TUNED PIPES
I HAVE THIS SET OF KS 1090 TUNED PIPES, THESE PIPES SLIGHTLY USED. THESE SELL NEW AT $257.00 PER PIPE ($514.00 A PAIR) $300.00 for the pair

BEAST AR7200BX
SPEKTRUM AR7200BX RECEIVER WITH BEAST X HELECOPTER FLYBARLESS CONTROLER BUILT-IN PERFECT CONDITION, FLOWN ON MY T-REX 550. SWITCHING TO DMSS ON DEMON CONTROLER COMPARE AT $199,00 I WILL S

JR XG8 DMSS 8 CHANNEL TRANSMITTER
NEW IN BOX XG8 TRANSMITTER. JR'S LATEST TECNOLOGY. NO RECEIVER INCLUDED AT THIS PRICE

3W 3W 150i B2 F TS
GREAT RUNNING 3W150 TS THIS IS THE TWIN SPARK VERSION, BETTER IDLE, ACCELERATION AND TOP END RPM CURRENT MODS DONE AT AIRCRAFT INTERNATIONAL DUAL IGNITIONS INCLUDED APPROXINATELY 20 HOURS

SmartFly EQ6 Turbo Plus Dual Ignition cut
The PowerSystem Eq6 combines three Smart-Fly products into one compact, light system.  The unit has eight channels, six of which have the Equalizer (servo matching) function built into them.  The unit

Powerbox Mercury SRS
I am selling my Powerbox Mercury SRS. This is a brand new unit and has only been mounted. However, I sold the plane it was in. The unit it is perfect condition and comes with a new warranty at the

Great Planes Sportster .60 For Sale
Great Planes Sportster .60 for sale. Has an older OS .60 with a Perry carb on it. Has servos in it but not sure what brand. This plane probably has not flown in several years and needs to be gone t

Nitro helis
Both helis are in like new condition. Flew very little. Also have a parts heli to go with the nexus and another nexus nib. The hawk sport has an extra canopy and tail cover. Will entertain trades for

Air-tech Germany Air cylinders
Air-tech Germany Air cylinders $50.00/shipped in the USA

JetCat P-200 52 Lbs of thrust
Selling my low time P-200 (52 lbs of thrust). The turbine is a propane start and comes with everything except the battery. This P200 starts, and runs like new. I've never had any issues with this turb

Ziroli F4U Corsair with 3 cyl gas radial
I have finished a Ziroli F4U Corsair with a Saito FG 84 3 gas radial installed. The engine has been made to run strong by Ray English the Saito GURU. The model is detailed with panel lines and rivets

2 A-10's for sale
I am selling 2 Blitsworks RC A-10's. One is Ready to fly minus receiver, the other is NEW in BOX..The one in the box is the Kit form and comes with no electronics, motor, or speed controller. A 4000

Great Planes Spacewalker
Giant Scale Great Planes Space Walker RC Airplane. 82~| wingspan powered by OS 91 FS four stroke engine. Runs good. Servos all checked.ccReceiver ready. Flown very little. Very nice condition. Local

XOAR 25x10 wood prop
XOAR 25x10 Beechwood prop new in package weight is 152g

Savox SC-1267SG Servo
SAVOX SC-1267SG servo High Voltage .09 speed 277oz torque at 7.4v as shown for only $55.00

Savox SA-1283SG Servos
THREE SAVOX SA-1283SG Servos .13 speed 416oz touque 6v All Three as pictured only $210.00

Hitec HS-7954SH Servos
TWO Hitec 7954 High Voltage Servos Both Servos as Pictured only $145.00

Savox SV-1270TG HV servos
TWO SAVOX SV-1270TG HV servos High Voltage .11 speed 486oz torque at 7.4v Titanium Gear Get both servos as shown for only $125.00

Blade 450 3D
Great flying helicopter! Very clean and in excellent condition. Everything works perfect, is straight and adjusted. Some new parts are included. Additional photos available upon request. Do

ZDZ-180 B2RV-J NIB **PRICE REDUCTION**
**PRICE REDUCTION** For sale is a NIB ZDZ-180 B2RV-J stump puller! Same mounting pattern as a DA-170. Looking to get $965 shipped to the lower 48. Specs are listed below. Thanks for looking. Two st

O.S. Engines O.S. 1.60 FX Ringed
Probably the smoothest running nitro engine I've ever owned. Very powerful and reliable. I am including a BCM (Bison) Pitts style muffler with it. ($65.00 value) It's a ringed engine and has ha

Jack Stafford Models B-24 Liberator
Greetings all, I am selling my Stafford B-24 kit. The kit is complete with Plans and Instructions. Included: 4 each K&B .18 2 stroke engines (All 4 engines have had an initial break-in run perfo

BVM Bobcat Nose Retract Assembly
Looking for BVM Bobcat Nose Retrack Assembly.

NIB OS FS 120
NIB OS FS 120 4-STROKE. Never seen fuel. There is a really small sent in one of the pushrod tubes. Compression is as factory new.

Carbon-Z Cub with Floats
Thinning out the herd. For sale is my carbon-Z cub with floats. This is stock as it came from horizon hobby. it has some dings on each wing tip from running off the runway into the fence once, other t

Great Planes 2-1/4 Aluminum Spinner
Great Planes 2 1/4 Aluminum Spinner very good condition. $12.00 plus shipping

O.S. Engines O.S. FS-120 Surpass SP
Not Needed. Nib,,,never seen fuel. The ~|bottom~| half of factory box is missing. I have ordered one exhaust header to complete this engine. It will come in the box as soon as it arrives.

ZDZ 160 B2 RV
Recently picked up this ZDZ 160 B2RV aircraft engine. I just purchased my first jet, so the 40% IMAC is out. This is a great engine,  ignition module, and new headers. Selling for $500 shipped i

JR COLT 6CH 2.4GHz DMSS Retro System
COLT 6CH 2.4GHz DMSS Retro System Part Number: JRP07432 Retail:$899.99 MAP:$499.99 Overview JR - JRP07432 - COLT 6CH 2.4GHz DMSS Retro System Step back to the Future!

JR XG8 8-Ch DMSS Transmitter, Black - With RG712BX 7Ch. DMSS XBus Rx
XG8 8-Ch DMSS Transmitter, Black - With RG712BX 7Ch. DMSS XBus Rx Part Number: JRP00658 You may Call me@302-875-3602 to discuss offers Retail: MAP: $609.9

RCGF 26cc
NIB RCGF 26BM. Never seen fuel. The ignition is missing other than the crankshaft pick-up. CDI is available from https://www.rcgfusa.com/rcgf-26cc-bm-electronic-ignition for appx. $65. Other brands ma

Rare Moki NIB 360m
I ran across this beautiful motor and just had to put my hands on it. I can see my teeth in the piston skirt looking through the exhaust ports. Never been anywhere near an airplane. The foam packing h

Giant 96" Lazy Ace
War weary giant 96~| wingspan Lazy Ace for sale. Here's a video I made of my Lazy Ace in flight: https://vimeo.com/223307201 Too big to ship. Magnificent flyer. Been sitting up for a whil

Giant 96" Lazy Ace
War weary giant 96~| wingspan Lazy Ace for sale. https://vimeo.com/223307201 Too big to ship. Magnificent flyer. Been sitting up for a while. Should be gone over by an experienced builder

Mounts for Satellite rx's
I have over 100 mounts for satellite rx's. Can be used to mount other things as well. Two different types. One type is a plastic mounting base with self stick pad on the back of it. The other type is

Servo Extensions Galore
I have 95 servo extensions for sale. They have JR / Hitec plugs on them. These are the good ones.... most of them are gold plated, 22ga from Air Wild Hobbies. A few are smaller gauge (lighter) for sma

Servo Plugs and Wire
I have a bunch of assorted servo plugs and wires for sale. There are: 2- 55~| wires with female plugs on one end 2- 36~| wires with male plugs on one end 2- 32~| wires with female plugs on one end

Airplane Holders
I have 2 of these airplane holders left to sell for just $15 each. These will hold your plane at the stab while you start the engine. It will probably cost at least $25 to ship one of these, so I do

Top Flite Precision Magnetic Balancer
Top Flite Precision Magnetic Balancer Balance props, wheels, spinners and more — with accuracy never before possible! Airplane and boat props, car wheels and tires, clutch bells, ducted fan jet roto

Castle Link USB Programming Adapter
Castle Creations Castle Link USB Programming Adapter, used twice. Price is $16 plus $4 shipping. Please add $1 for Paypal payments to cover the fees. Thanks for looking, Jim

1/72 Fletcher Class Destroyer DD-557
1/72 Scale USS Johnston 557 Customized from AquaCraft complete with: 1. BECC cloth flags & Vinyl Decals. 2. DURATRAX BEC 128amp ESC 3. (3) 3000 Mah BATTERIES W/DEANS PLUGS. 4. RAM Bilge

Top fight giant zero
For sale new top flight zero Never flown, all components new. DLE 55R with 22/8 xoar prop. Rorbart air retracts, All new hitec servos, spectrum 9 channel receiver ,farnaco batteries 5200 rec

Top Dawg Aviation Canopy
I am looking for a canopy for the 88 Inch Gas Top Dawg Aviation 540. Mine is yellow but will take any color.

World Models Piper J-3 - 1/4 Scale - NEW in BOX
New in Box, World Models 1/4 Scale J-3 Piper Cub Plane was recently purchased from World Models. Sudden change in plans resulting in sale: my loss, your gain. $349.00 Buyer pays shipping, OR lo

Dromida drone
Comes with remote, battery, charger and extra set of props and parts needed The Frame is brand new Comes with new props Needs one new motor 239-776-9544

Goldberg Piper Cub anniversary edition Electric with landing gear and Floats
Electric anniversary edition Goldberg Cub Has .50 electric engine running 3s setup Ready to fly with your receiver and lipo battery Comes with floats and extra spare landing gear Cub Wingspa

E-Flite Blade CX 4
This has been flown a few times and body cover is slightly cracked from a hard landing I think it will need a new set of blades 239-776-9544 This is the Blade CX4 Micro Coaxial Ready-To-Fly Elect

Fr sky 9ch 2.4
New in the boxFrSky L9R long range receiver 2.4ghz L9R receivers boast reception sensitivity that doubles the range of existing FrSky X Series receivers. The L9R supports 9 standard servo outputs a

Futaba R617FS 2.4
Used Futaba R617FS 2.4ghz Fasst RC airplane/helicopter receiver. Will work with any Futaba Fasst System. SPECS: Size: 1.6 x 1.1 x .35~| (40 x 27 x 9mm) Power Requirement: 4.8 - 6V Curre

Pilot Extra 330SC- 35%
35% Pilot Extra 330SC DA 120cc, DA Headers with Dual ProFlow canisters, Mejzlik 29 x 9 Carbon Fiber Prop w/spinner 3 – MKS 599 servos Rudder, Elevator, 1 – MKS High Speed Servo Throttle, 4 – HS-

SAITO FG-60R3 Plus keleo Exhaust


Futaba S9405 Servos $45 each (7 available) New installed but never flown in Hangar 9 SBach
Futaba S9405 Servos - NEW installed but never flown in Hangar 9 sBach $45 each. I have seven available. For additional info, you can email your phone number or call 201-214-6191

JetCat SPT5 Turbo Prop
Like new Turbo Prop engine, Engine was complete gone through, all parts replaced new from factory, please look at receipt. Engine sold as is, all sales final!

Moki 250cc Radial
MOKI 250cc Radial Factory Refurbished Guaranteed Perfect! Factory setup and not ran since return $3200 includes shipping anywhere in US (Will ship worldwide!)

Crimper and 20 pairs of Servo Ends Fut/JR
You get a crimper and 10 Female ends and 10 Male JR Ends and 10 Male Futaba Ends So you can pick which ones you want to use Perfect for servo lead connectors and some other RC crimp connectors

Polyethylene Heat Shrink Tubing with box x 700 pcs
You get 8 different sizes in different colors and all comes in a plastic case From 1mm to 14mm sizes 700 pieces

Tiger cat
Need. A. Tiger. Cat. Esm. Or. And. Big. One

DLA 64 cc Twin Cylinder
DLA 64 cc Twin Cylinder ~|Boxer~| Gas Engine HP: 7.2 @ 8,500 rpm Idle: ~ 1,400 rpm Pull: 41.8 lbs @ 300 ft Altitude Weight: 57.1 oz Engine, 2.3 oz Muffler, 6.4 oz Ignition Prop: 22 x 10, 23

Hobbico Accu-Cycle charger
Used in excellent shape Hobbico Charger. See full details at http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEYD4&P=FR&atrkid=V3ADW3A24148B_10642245165_pla-296402450811__36556522365_g_c_pla_w

DLE 222cc 4-Cylinder
Factory Run Only (NEW) Specifications: (pulled from http://www.dle-engines.com/dleg0222.html) Stock Number: DLEG0222 Displacement: 13.6 cu in (222.5 cc) Bore: 1.77 in (45 mm) Stroke: 1.38 in

Saito 125 Mounted in Hangar 9 sbach w/lightend spinner 18-5 Prop & Remote Glow Driver NEW
Saito 125 Engine is brand new mounted in Hangar 9 sbach.  Was never started or seen fuel (lists for $375.00).  Selling with lightend spinner 18-5 Prop and Remote Glow Driver -  $325.00

YS61S long stroke
Up for sale used YS61S long stroke engine, picked this engine up from a club member about a year ago have bench run it runs great. includes a NIP OS8 glow plug,and check valve. No header or pipe in

3W 170 Headers - like new - 1 flight on them
3W 170 Headers - Like NEW - one (1) flight on them. 3.5~| drop 4~| length

Futaba Switch Harness w/Charge Plug Futaba J
NEW Futaba Switch Harness w/Charge Plug Futaba J $6.00 PLUS POSTAGE EMAIL ME FOR PHOTOS

Pro Heavy Duty Futaba J Servo Y Harness Connectors
(2) Pro Heavy Duty Futaba J Servo Y Harness Connectors. (24 inch.) Retails $12.00 each SAVE YOURSELF SOME MONEY YOURS FOR $15.00 Plus Postage. Email me for Photos

Futaba Servo Extension
This is a Aileron Servo Extension with Futaba J Connectors. This extension goes between the receiver and the aileron servo to make the wire longer. On one end of the wire is a male ~|J~| connector a

BVM Bandit
Up for sale is my well taken care of, but flown BVM Bandit. This is the original Mk.I model, and not the MkII where they changed the wing mounting system. I purchased this about 5 years ago, with o

Jet Stream 888
Used twice for tune up. Comes rtr minus battery. No damage at all! Buyer pays shipping. One owner (me) Will send pics upon request. Having problems loading here. Runs 50mph out the box pro

Roban Superscale Bell 407 (700 size)
PRICE DROP! From 1350.00 to 1200.00 This is a Roban Bell 407 (700) size prepainted kit. You will need to add your electronics to the aircraft. Includes scale lighting, landing gear, function doo

O.S. Engines O.S. .55 AX FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

World Models Cub - 1/3 PARTS
I have a set of wings and elevator for the world model 1/3 scale clip wing J3 cub. wing tips are scuffed up need covering but no wood is damaged. 100.00 you pick up will not ship. Call Dan with ques

Spektrum DX6i w/ 5 RX trade for Taranis
used dx6i with 5 receivers 2 orange 1 lemon with satellite and 2 spektrum 1 with satellite. looking to trade for a taranis.

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. Much lighter and eaiser to manage th

Vario Hughes 500 - Turbine
Gday guys - for sale is the rare Turbine Hughes 500 ready to fly. JetCat PHT3 Turbine rotor disc Ø 1 680 mm take-off weight 12 kg Specification of the kit scale 1 : 4,5 height 630 mm length 1

Fly eagle mig 29
Hello up for sale is my flyeagle mig 29 it's prehoneycomb it has savox servos for the elevators all other servos are hitec 7955 also has spectrum power box interarco uat all you need to do is add your

T One Models T1
Selling new T1 scheme is Red /Black. options/equip. Incl.   Electric gear/brake upgrade   Tams pipe   Split fuel/smoke tank upgrade   Complete pre made wire harness   Fa

Hangar 9 Extra 330S ARF
For Sale 1/3 scale Hangar 9 Extra 330S This plane is 3D capable 97 in wingspan, 83 in length Powered by Zenoah 80 CC Twin Gas Engine JR DS 8611 servos on control surfaces - total of 8 JR NES 537

Hangar 9 Edge 540 (1.20)
For sale is a Hangar 9 27% Edge 540 This is a great flying aerobatic airplane. Powered by a Saito 180 four stroke. 78 inch wingspan Throttle JR-417 Ailerons- 2 es JR ST125 MG Elevators 2 each J

Seagull Edge 540 .60
For sale is a 60 size Seagull edge 540 This plane has a wingspan just under 64 inches. It is powered by an OS 91FX two stroke engine with less than a gallon of fuel run through it. 2 ea JR DS 537 o

Kyosho Calmato 60 Sports
For Sale Is a Kyosho Calmato9 Sports 60 Evolution 61 two stroke 72 inch wingspan Throttle JR DS 821 Elevator JR DS 821 Rudder JR DS821 Ailerons 2 each JR ST47BB. No Crash Damage Nice Flying

JR XP8103DT PCM
I've decided to sell this transmitter that I used for my foamies since I have everything programmed in my Futaba radio now. This JR 8103 works as it should, but it doesn't look good on the back. A few

Hangar 9 Cessna 182 Skylane - 150
Cessna 182 Skylane Remote Control Airplane by Hangar 9 This is a large airplane with a 94 inch wingspan It is powered by a Saito 150 Golden Knight 4 stroke engine. It has functioning flaps, a scale

Top Flite P-40E Warhawk - 60
p-40 from top flite completely assembled and covered in fiberglass ( ailerons, rudder, elevators, covered in solartex) the canopy and cockpit are from p-40 arf. asking :$ 150 obo will not

ZDZ Super 80 RV-J
Hi, This is an excellent engine... almost brand new... only run twice on the bench to make sure all was OK ... and it is...!! It's the SUPER ZDZ 80 RV-J engine... with the black head. Some flye

Top Flite T-34B Mentor - 61
i have this top flite t34 mentor v tail used but in excellent condition, almost ready to fly. totally assembled and covered in fiberglass, painted with csr paint + clear gloss it does not have fla

Hangar 9 Extra 260 27%
Hi, This is a great flying plane... and has wonderful equipment... and is quick... The engine is a DA 50 with stock side pipe and just starts and runs without a problem. I use Redline 40:1 for

3D Hobby shop 75 Extra
Brand new in box Yellow/Black 75 extra

piper pawnee 96"ws
piper pawnee texas rc 96~| ws project never crashed hatch and canopy cover with fiberglass. it needs to be finished, i dont have cowling, has some servos, i also have landing gear and wing struts, thi

Spektrum AR12120 Power Safe Receiver
I have two AR12120 receivers that were in Jets and are no longer needed. The battery connectors have been changed to T-Connectors so they matched my batteries. The pictured receiver has the anti-cha

100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel
The cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Great for contractors and the home hobbyist. Fits Dremel Craftsman Chica

Brand new in box RC10B64D team kit
Hello all. Up for sale is a brand new team associated RC10B64D team kit. Never opened. Purchased as a spare kit but never got to it. Comes as if you purchased from local hobby store or online. Pur

Top Flite F4U Corsair - 61 parts


tricycle robart
robart set in good condition $85

top flite p-51 1/5 tail and main retract
top flite p51 1/5 retract tail robart main is aerowork with robart struts used in good condition $200 obo

Airworld GEE BEE R3
What you are buying: Airworld Gee Bee R3 composite completed model. Includes composite spinner, stainless steel flying wires, extra metric cotter pins and clevis pins. No radio gear, fuel tank or

1/4 oz stick weights x 48
Have a few of these. New You get 6 sticks of eight 1/4oz weights

Skymaster Large BAe Hawk 1/3.65
Skymaster 1/3.65 Large Hawk 100 NEW UNBUILT Wings still in box. Everything that comes from the factory. No work done. Customer went in a different direction so was acquired by FlightWerkz.

stick fusalage or set of plans wanted
I have a wing set from a 1/3 scale Stearman that is 85 in. with a cord of 15.5 in. I want to mount it on a stick type fuselage. The fuselage has to be from a 90 to a 120 size plane.

Giant Scale Planes Staudacher GS300 - 90
NIB box opened for inspection

SCALE DLE 120 Hellcat Exhaust
I had this scale Mufflers made for my Ziroli Hellcat. Unfortunately I lost the plane during the fish flight on take off. I decided not to rebuild the plane opting instead to build an enlarged version

DLE 120
Im selling this darn near new DLE 120. I lost the plane on the 5th flight on takeoff. This engine is from broken in. There is a small broken chip on the underside fin and a ding on another on the unde

Saito flex exhaust tubes
New, unused Saito flex exhaust tubes for a FG-33r3 radial. May fit other applications. No longer needed. free shipping

Miles Reed Weeks Solution Bi-Plane
Built from Reed plans a ~74~| Weeks Solution Biplane. Comes with what I believe is a 4.2 Sachs with electronic ignition. I will not say this for sure other than the props I found for it were a 24/10

Two Great Planes Fuel Filler Valves and Fuel Filter
This is two of the Great Planes Fuel Filler Valves and one of Great Planes Fuel Filter. They are all three NEW and still in their original package. Great Planes Retail Price on the three items is $35

Blade theory W with FPV (2) and fatshark headset (2)
Much like video games- us oldsters can't compete!! So  as you can see I got all the best and tried but sadly gave up quickly. Everything is like new, can't even see grass stains on the bottom o

30cc Funtana Pro Stick Built Kit by Modelbau (FINAL Price Reduction)
Final Price Reduction. $600 30cc Funtana Pro Stick Built, Kit by Modelbau RTF Note: This plane has NEVER been Flown and the Engine has NOT been Started. Airframe: Fuselage, Removable Wings

Final Garage Sale Ad (Updated)
Items are New or Light Used (LU) Buy ALL Remaining Items $50 Any 2 Items $10 Any 3 Items $15 Any 4 Items $20 Note: I PAY Shipping anywhere in the Continental USA. - Shown in Pic Spra

TamJets F-18F
I'm going to sell my TAM/BVM F-18F ready to fly or I will pull out whatever gear you don't need. This plane has ten flights on it and it flies great. I have a Jetcat 180 RX on it with only 1hr 58 M

Pilot RC 29% Sbach 342 Custom Green Livery RTF ELECTRIC
Pilot RC 29%Sbach RTF ELECTRIC $1000 All JR 8411 (4) Rudder is JR 8711 JR 9 Channel power safe dsm2 rx 2 glacier 2s 2100 life rx packs only 3 flights 2 glacier 6s 6000 30c packs only 10 flight

O.S. Engines O.S. .75 AX


JetCat P-120SE, LOW Time, Kero Start
JetCat P120SE, Kero start, serial #2558, only 22 minutes on ECU, includes everything in pics except GSU. It came on a like new KingCat I bought. This turbine was purchsed originally in 2008 a

Ace Seamaster 40 built from KIT w/OS 50SX -RTF
Ace Seamaster 40 recently built from the kit (not ARF). The airplane has not been flown but is ready to fly. Includes OS Max 50 SX Engine, Switch Glo Pro Remote glow driver, 2500 NiMh 6.0 Volt Receive

Hobbico Accu-Cycle Elite
Hobbico Accu-Cycle Elite battery cycler and charger. Excellent condition ready to use. Buyer to pay shipping and handling. If pay pal is used please add 4% to the price. Asking $65.00.

EME 30-35cc Starter
I have for sale a new EME Auto starter with a 100amp electric switch with XT90 connectors, a new Turnigy 2200mah 3s 20c lipo with XT60 connectors, a new HD switch harness with built in charge jack XT6

Giant Scale Planes Staudacher GS300 - 90
NIB only taken out to inspect

RAM Engine speed Control
For sale brand new RAM Cruise Control unit. Can be used to control the air speed of you Jet plane from the ground. Buyer to pay shipping and handling. If pay pal is used please add 4% to the price. P

Hangar 9 Extra 330S airframe only
New assembled Hanger-9 33% Extra 330S Not much to say about the plane except that it is new never flown............ SELLING THE AIRFRAME ONLY............. $575.00 WILL NOT SHIP THIS IS A LA

UP-4 valve
UP-4 valve:  additional gear door valve such as on the B-25. list: $78, sell for $45 plus $7.15 USPS priority box for shipping. sam parfitt samparfitt@fuse.net

Super Tigre G-2300 Ring NIB
Hello Super Tigre fans. If you have a NIB Super Tigre G2300 for sale, I'd be interested in hearing from you. Please PM me with your best offer, including shipment to France. Payment as you lik

Jet Hangar Hobbies F-86 Sabre
The Jet Hangar International F-86F Sabre/FJ-2/3 Fury is a true ducted fan trainer. This kit provides a simple to build and easy to fly trainer type ducted fan aircraft while still maintaining the scal

Micro Mini Hand Drill with Chuck and 20pcs 0.3-1.6mm Straight Shank Twist Drill Bits
Have a few Material: Steel Color: Silver Drills Length: Approx. 2.1-4.3cm/0.82~|-1.69~| Drills Size: 0.3mm, 0.35mm, 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm, 0.65mm, 0.7mm, 0.75mm, 0.8mm, 0.85mm,

Eleven Hobby T-28D PNP FREE SHIPPING in CONUS
I have for sale a very nice clean looking T-28 that I repainted. All painted with rattle can spray paint from Home Depot. Has vinyl from Callie Graphics. Never been crashed. Plane still looks new. Sti

ProBoat BlackJack 9inch .
Used in excellent condition.. Only used it a few times in a swimming pool.. Comes with Radio, boat,battery, charger, manual and boat stand.. Added the team losi decals to match my losi mini T truck..

Yellow Aircraft P-38 Lightning Landing Gear/parts
Wondering if anyone has gear for a Yellow P-38 kicking around. I broke a trunnion on a main gear yesterday. I only need a trunnion, so damaged gear/parts gear are fine. Please PM, or email mikeandjean

Balsa USA Sopwith Pup - 1/4
Sopwith pup with zenoah 20cc . Built by a master builder and ama member 001 . Comes complete and ready to fly, all servos and spectrum receiver , electronic ignition. May trade for something unique or

Spring loaded canopy locks x 10
Spring loaded canopy lock. Great for canopy, battery compartment or hatch. Locking shaft protrudes 12mm Lock mounting area: 15x26mm

Flightline 1200mm Bearcat PNP with Retractable tail wheel
This plane only has 3 flights on it. Two from me and when I sold to fly friend , he didnt fly it for months . When he did , you had a hard landing and ripped one gear out. I got the plane back in a tr

Sig Citabria - 35
I had this built many year's ago and never flew it. Never got the O.S. 46 FX dialed in. Had a bad back and got tired of taking cowling off and on. Sold to a business to hang and display it. Bought it

Hangar 9 P-51D ARF Plastic parts HAN503512
I'm looking for the Hangar 9 P-51D part number HAN503512 Plastic parts. I have two kits but looking for the plastic wing and fuselage parts to complete the P-51 I've been assembling buying one part at

42% Hyperlite Slick
Need to make some room. Selling my 42% Slick Hyperlite. Custom built and covered by the one and only Mark Boguszewski. Absolute perfection!!!! Powered by a 3W 110 Competition Series Engine on stock ex

Stinson Reliant
Here is a beautiful Stinson Reliant. It has a evolution .60 engine. This plane has never been damaged or abused. Only a few flights. No tears or rips in covering. It has a 68~| wingspan. RTF, just add

DLE 120
This engine is low time but has new pistons, rings, and cylinders. I have not run it since overhaul. That's so you can break it in the way you want to. The reason for overhaul is that I used after-

E-Flite Blade 400 3D
500 size Blade Helicopters all RTF condition, never crashed few flights on them

B17G Flying Fortress 10'2"
I built this B17G for competition, it is detailed almost to the max. It is 10'2~|, built from Bob Holman plans. It has flaps and Likes electric retracts. All of the lights and all three turrets w

3W 3D Prop 31.5x8-14 for 150cc-170cc
I am selling my 3W 3D carbon fiber propeller (31.5x8-14). These are expertly matched to the 3W150-170cc engines, and they work great for IMAC and for 3D flying. Here is a link that shows the specs of

Holman/Meider FW 190 D-9
Scratch built fuse and Holman foam wing build up. Balsa construction fuse, tailplane, cowl, custom fiberglass D-9 hood and Holman wing. Has custom Century Jet mains, and Sierra retracting tail whe

Hawker Nimrod 74"WS
Hawker Nimrod Scratch built and modified from Chris Gold's Fury Plans. Balsa construction. Fuse half fiberglassed and painted. Back half of fuse, tailplane, control surfaces and wing covered

HPI SAVAGE MODDED FLM,RPM,STS.30
THIS IS BEEN SITTING ON THE SHELF AND ITS TIME TO LET IT GO I JUST LIKE MY BOATS BETTER IT A HPI SAVAGE IT HAS A FASTLANE MACHINE CHASSIS AND MOTOR MOUNT RPM ARMS ANS A STS .30 RICK BLAKE MODDED MOTOR

500 goblin RTF
Goblin 500 RTF excellent condition V-bar system on it, 6 cells setup.

700 Goblin 12 cells setup
Beatiful 700 size electric Goblin about 10 flights on it.

Helion INVICTUS 10MT
Purchased this vehicle brand new in box from Hobby Town. Son only ran it a few times. It is in PERFECT/ALMOST BRAND NEW CONDITION! IN THE ORIGINAL BOX! Would make a perfect Birthday or Christmas G

Align T-Rex 600


3'' Metal Track platform
HANDMADE in the U.S.A. By someone who cares!!! Durable tracked robotics platform, great for beginners and advanced hobbyist. T66 aluminum frame, lynxmotion 3~| track system. 120 rpm Gearhead torque mo

PRICE DROP!! Like new Magnum .61 xl two stroke
I HAVE DROPPED THE PRICE DOWN TO $45 FROM $55. DON'T MISS THIS ONE.Offering for sale, my like-new Mag.61 two stroke with muffler. This power house is really clean, inside and out. Great compression, s

Robart/Ziroli G.S. Stuka struts
Giant scale struts for a Ziroli Stuka. I had planned on using them in G.S. Macchi 202 as retract struts. doing a new project. Robart price; $201.00 Asking $140.00

Brand New O.S. Engines O.S. FS-70 II Surpass
For Sale is an OS FS 70S-II Surpass 4 Stroke Model 34700 Brand New In Box. Never mounted or run. Perfect condition. Comes with manual and all the paperwork. Very nice engine. $175 + 15 shipping Priori

POWERBOX POWERPAK 2.5X2 ECO NEW-IN-BOX
New-In-Box Powerbox PowerPak 2.5x2 Eco with built is cell balancer and mount. Assembled using the latest generation of high-current Li-Ion batteries Output voltages: 8.4 V For use as receiver pow

Hangar 9 P-51D ARF
box has been opened, parts never out of box, part still in sealed plastic bag $195.00 + shipping. MFG's link http://www.hangar-9.com/Products/Default.aspx?ProdId=HAN2375

Hanger9 F4U-1 Corsair
Older Arf 60 size Hanger 9 F4U Corsair , has a new cowl..Has some minor hanger rash . servos in the wing and fuse , also has retracts . Local pickup only, thanks

DA60
Perfect condition, barely used, less than a gallon through it, DA60. Includes ignition and pitts style muffler. Check out the pictures. $500 which includes shipping to Cont. US and Paypal fee. No

"Expert" TX/RX charger high performance trickle for Futaba
NEW-IN-BOX ~|EXPERT~| high performance trickle chargers for FUTABA batteries.  With 100mA output they charge twice as fast as the older 50mA FUTABA wall warts.  MODEL EXRA420 (FUTABA), ORI

Shoestring by Great Planes
Shoestring racer by Great Planes. Fuselage is fiberglass. Includes ESC, electric motor (Scorpion), servos, and 4 battery packs. It runs on 2 battery packs (6 S). Receiver is not included. This

Blade 130X Red Bull BO-105
I bought this a few years ago, only flown 3 times, is BNF mint condition. open to offers. MAKE OFFER.....

2 Forza 450 with 3 blade heads
I am JR dealer, these have been sitting in my office for over a year. the green one has been test hovered and the Orange one has been flown a few times. I am a scale guy so these have not seen any ha

Garage Sale Ad!! - OS 61 SF/RF PARTS - NEW
HERE ARE A GROUP OF BRAND NEW PARTS FOR THE OS 61 SF and RF ENGINES. The prices listed here are for EACH unit and came right off Tower invoices and are what the parts cost me when I bought them just

Ledgend P51 96" ws zdz 80
Great looking p51 with composite fuse and built up wings. ZDZ 80 motor and runs strong. Sliding canopy with 4 blade prop. Maiden it few weeks ago and had landing and repair the retract area with stron

Team Losi Eight-E 3.0
This is a great condition 8ight E 3.0 rtf with everything pictured. Comes with new set of tires and 4s 5000 lipo. No rx or tx

Duralite Power system
This is in great condition with switch

Freewing F14 +tons of parts
This is the twin 80mm Freewing F14 with tons of extra parts and 2 sets of 6s lipo pack. I got it awhile ago but never got around to fly it. Too busy with turbines. It was in a belly landing which sc

Great Planes Reactor Biplane .61 GP/EP
REACTOR BIPLANE FUTABA 3152 ALL AROUND YS 91 ENGINE RUNS ON 30% PLANE IS FAST AND WILL 3D WELL WILL INCLUDED 1 NEW AND 1/3 GALLON OF FUEL LOCAL PICK UP NO SHIPPING

Byron Originals F-20 Tigershark kit
Looking for a F-20 kit Must be able to ship Sorry no PayPal

PAU Extra 40%
pau extra rtf minus receivers included if needed, zdz180 with proflow cans, biela 32-12 prop which imo is perfect for imac, including a biela variable pitch prop 31.5x8x14 which is excellent for 3d

Extreme Flight Edge 540 EXP
EXTREME FLIGHT 60" EDGE 60" edge with their power combo option, rft minus receiver, hitec 5245's on all surfaces, 3 glacier 6S 3300mah batteries, my style of flying i was safely getting a

Wing Manufacturing P-38 Lightning - 40
Hey guys, This is a Wing Mfg "short" kit that is NIB.  The kit is in excellent new condition, builds into a 70" wingspan airframe.  Everything is in the box, hardware bags ar

Yellow Aircraft F-14 Tomcat - 82
F-14A Tomcat Yellow Aircraft. Working Spoilers, Elevons and Wing Flaps and Rudders.  Custom made Swing Wing Actuator. Maiden Flight Video: https://www.youtube.com/watch?v=y85aXxMTJw4 SPECS:

carf eurofighter canopy
Hi to all I'm looking for the carf eurofighter canopy so please if you have one contact me thanks so much for looking.

Yuneec Typhoon H
Have this nice lightly used 4k drone for sale .this drone was used only ones maybe for five flights to recover jet from a very tall corn field about 3/4 mile from a flying field.

Bvm twin turbine power rafale
Hi I'm selling my bvm rafale with two super eagle for power or just turbine ready ,recently replaced retracts cylinders and some other parts from bvm with remote drop external tanks and lights + I hav

jetjoe 1400 new inconel burner
Have this brand new and new style burner for jj1400 so if you have one burned or deformed this is what you need to make the turbine work again thanks.

Garage Sale Ad!! PowerBox equipment
For sale are items that are new or lightly used ( maybe 2-4 flights on them) Most of the original packages are gone, the prices reflect used items, but you are buying as good as new products. Po

CORTEX
price includes shipping it was in the airplane for a couple of fights but it`s not for me any questions please ask Shawn

Balsa USA S.E. 5a
BALSA S.E.5A : Smithsonian quality. Built exactly from an American plane shown in the photo. Bought this plane 4 years ago, put on my bench for show and never flown. Here's what I know. Covered

WIRE WHEELS
WIRE WHEELS : 4 and 1/4~| New. Proctor wheels distributed by E.B Wire Wheels, years back. $70 plus $10 shipping. Thanks for looking.

Prather Prop Pitch Gauge
Used Complete Prather Prop pitch gauge .

BVM Super Bandit 3 Main NEW Struts
BVM SUPER BANDIT 3 Main Struts That are NEW!!! Retail Price $315

Sig Piper J-3 Cub 1/5 NIB kit
I have for sale a new in box Sig 1/5 scale Cub kit. It's still factory sealed. This is all laser cut. Asking $190 plus shipping. Would prefer a local pickup. US Postal Service money order only. No Pay

Yellow Aircraft F-22 Raptor
I have a yellow aircraft f22 for sale, its in decent shape for its age, it lost a gear door in flight and I have not replaced it, the paint needs work, its not bad just not good. the plane fly's gr

Jet legend yak 130 1/4 scale twin turbine
This is the jet legend yak 130, its set up for twin turbines. I bought this plane because I wanted something large and reliable and I was not dissapointed, with the amount of money that goes into

Kingtech K100
Nice strong motor, reliable and low hours, if you interested I will provide more information. I can take any form of payment including credit cards, there will be a 3% charge for credit cards or pa

Composite-ARF Yak-55SP 2.6m Landing Gear
This AD is for the landing gear only. Not the airplane

QAV 500 PROJECT
QAV 500 PROJECT, this is a project I started but lost interest in, everything is new, unused in excellent condition, no issues here. The following is included: QAV 500 frame w/aluminum arms, T-MOTOR M

Balsa USA Sopwith Pup 1/3 - 2.7
BALSA USA 1/3 Sopwith Pup, has functional landing gear,covered in Solartex, has some patch repairs in the covering but is in good condition has 1/4 scale servos on the elevator,rudder and ailerons,pow

HRB 4S 14.8v 5000mAh 50C-100C Lipo
I have 3 brand new Capacity:5000mAh Continuous discharge rate: 50C Burst Rate :100C Voltage: 14.8V Cells : 4S Size: 6.1×1.89×1.26in/155 mm ×48mm ×32mm (0 - 3mm difference) Weight: 18.27oz/5

China Line RC 6s 4500mah 40c x 2
I ordered the wrong size so will let it go for lower then I paid for quick sale . I paid $86 ea You get 2 lipos for $150 shipped Voltage 22.2V / 6-Cell / 6S1P Discharge Rate 40C Continual /

Parallel and Series T-Plugs
I make these Two lipos to One ESC and Can also make Two Esc's to One Lipo You can get 5 Parallel or 5 Series plugs for $15 or Mix Match

24in 22g JR/Hitec Servo Extensions x 20
I have many sets of these

Vintage Guillow's French Nieuport 28 and Comet Corsair kits
Up for sale is a couple of vintage rubber band power kits by Guillow's and Comet. First kit is a 1957 Guillow's French Nieuport 28 WW 1 fighter with a wingspan of 17.5 inches and a fuselage length

12in Y Connectors 22g JR/Hitec servo extensions x 10
I have a few sets of these These are Y's These are 12in and 22g wire $15.76 shipped for 10

Bullet Connectors 4.0mm x 25 pairs
I have lots of pairs of 4.0mm bullet connectors You get 25 pairs

2mm Gold Bullet Connectors x 30
I have a bunch of these These are 2mm gold bullet connectors You get 30 pairs

Hobby King/ Vantek 88 inch Spitfire for sale
I have a Hobby King 88 inch Spitfire for sale. ( made by vantek for Hobby king). This plane flies great, but I had a lot of trouble getting the landing gear in a position that I could actually taxi i

Bae Hawk 1:4 3/4
Skymaster T-1 BAE Hawk 1:4 3/4 Power Box Cockpit SRS i3-Gyro Servo's Hitec 7954 on control surfaces Hitec 645 Steering Unilite System (2) 123 Batteries 2,500 ma Smoke pump Coc




 
RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2017.
Terms of Service | Privacy Policy
 
GET FREE RC CONTENT FOR YOUR WEBSITE

Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

Products Videos WattFlyer.com RC Classifieds

RCU2 | 54.224.197.251 | 0 | 1 | 02:53:13 AM EST | NC