Desert Aircraft DA120 nib
NIB DA120 engine with ignition. Will consider partial trade on nib YS70DZ/115 or Saito 115GK. Shipping is a flat $15 in the US.
Desert Aircraft DA100L nib
NIB DA100L engine. This is the engine without ignition. Will consider partial trades on YS70DZ/115 or Saito 115GK. Shipping is a flat $15 in the US.
SET OF 2 >>> Hitec HS-77BB
i'm selling two new Hitec HS-77BB servos. these are low profile servos .i bought them for the flaps on my corsair. i mounted them but never used them . i bought them two weeks ago for 30.00 each . 4
Triton2 & Triton Jr. Chargers
As the planes get bigger, so do the charger requirements. I have a number of Triton chargers that no longer get any use. All are functioning perfectly and the displays are bright and clear. Have origi
Turns props ranging from 20 x 14 up to 24 x 10 at roughly 7600 rpm
Capable of powering an airplane as big as 40 pounds with authority
Magneto-driven CDI ignition system
the motois in g
Futaba transmitter- T6EXAP -6 chn 72.590 mz/chn 40 no rec'v (can't find it). battery is in good shape.
GILES-200 acrobatic Velkom 40 size
This is a Fiber glass 40 size GILES-200 Acrobatic airplane kit this is complete to build fiber glass fuselage and cowling foam sheeted wings this is designed to use 6.5 to 8ccm glow or gas engine or
Kyosho 4runner SAS
Kyosho original 4runner SAS with the following specs:
-Kyosho 4runner base
-Original body w/ MSD rack
-Loaded TLT's w/ 4link front and rear
-Rc4wd metal shafts
-Rc4wd t-runner beadlocks
9610 MG Retract Servo
6 volt torque, 134 ounces
4.8 volt, 112 ounces.
.24 and .31 speed
Dual ball bearing, metal gears
Brand new retract servo, universal connector, strong output.
$12 shipped in the USA.
Hitec HS-5625MG & 5645MG
Top quality Hitecs, one 5625, one 5645. The RCU listed specs are for the 5625; the 5646 is stronger but a tad slower. Selling as a pair. $65 shipped in the USA. If you ne
Assan 410 gyro
Brand new, never mounted, used, or bench tested. NEW. These work great. $16 shipped in the USA.
Assan GA510 Tail Lock Gyro, NIB
This is a top quality gyro. Small size will work in any size helicopter, 300 and up. Brand new, never mounted or flown or bench tested. Guaranteed to be as I say or your money back.&
3-cell extensions for Turnigy
Eight inch extensions that come in handy when charging three-cell batteries or for use in your plane. $6 shipped for five.
Robart 615 Folding Retracts w/struts
Robart folders that fit Top Flite P-40 and Corsair 60 sizes, kits and ARFs. Probably also fit the Hangar Nine planes that use folding retracts as well. The usual Robart quality. Exce
Linck Models Chips Akro II
Any leads would be appreciated.
Dubro Vibe Reducing Engine Mount, 60-120 size
Top quality vibration isolation engine mount. Great for four strokes and the small gassers. $17 shipped in the USA.
Hobbico Original Pro-Series Accu-Cycle
Nice charger for flight packs and transmitters. Cycles Nicad and Nimh batteries. Digital display, charge, discharge controls. Cords included. Easy to use. $24 shipped in
Great Planes Escapade .61
I am looking for a Great Planes Escapade 61 ARF NIB. What do you have and what are you asking for it, including shipping to Cleveland Ohio? Thanks.
Model Tech Extra 300 ARF - 25
I am looking for the COWLING ONLY for this airplane. Does anyone out there have one?
4" Aluminum Spinner with hardware
Nice GP aluminum spinner with two backplates and hardware included. $22 shipped in the USA.
XQ Power 4020 Servos
Price is $40.00 per servo
The XQ 4020 have a core less digital motor, for precise strong movement. The XQ 4020 has all titanium gears, heat sink to reduce overheating, waterproof housing, and gre
Great Planes P-6E Hawk ARF
Hawk P6E ARF 1/5th scale. I have markings for a 94th pursuit squadron paint scheme if any body is interested in bashing the ARF into a different paint scheme. Also have belly tank that can be added as
NIB Saito FG-17
NIB Saito FG17.
325.00 Plus shipping.
Axial SCX10 Newbright JK with Custom Tubework project!
Hello All, i bought a new 1:1 Toy so some of my projects and scalers need to go to fund my big toys.
Up for sale is a very nice Axial based 4 door JK project. Its mostly done, you just need to moun
1/5th Scale P-39 Built from Pippeno Plans
The span is 81~| and the model has never flown estimate the weight at 22 lbs. The firewall is set up for a Hacker A80 10.
SCX10 Based Custom Chevy Avalanche Zombie Apocalypse truck!
Hello All, i bought a new 1:1 Toy so some of my projects and scalers need to go to fund my big toys.
Up for sale is a very custom SCX10 Based Custom Chevy Avalanche Zombie Apocalypse truck!
Tamiya CR-01 with Axial Trans and Rare Hummer SUT Hard Body
Hello All, i bought a new 1:1 Toy so some of my projects and scalers need to go to fund my big toys.
Up for sale is a very nice Tamiya CR-01 with Axial Trans and Rare Hummer SUT Hard Body. This tru
FW190 fglass & clear parts, .60 size
New parts, for Top Flite kit or others of that .60 size. Two each cowls, gun covers, blisters, static props, clear parts
Spectrum AR400 DSMX full range 4 ch. RX
Spectrum AR400, DSMX, full range, four channel receiver, has two antennas, one short and one long, does not need a satellite unit, works without issues. $20 shipped.
TROY BUILT MODELS 50% DECATHLON - CITABRIA
THIS IS A TURN KEY READY TO FLY DECATHLON. ADD TRANSMITTER AND GO. BUILT BY HEINZ AYVAZ.
K&S HEADERS WITH CANISTER MUFFLERS
50 OZ FUEL TANK
GRAUPNER SMOKE SYSTEM WITH 5
SUPERSPORTSTER .90-1.20 KIT
BRAND NEW KIT OPENEN ONLY TO CHECK CONTENCE ...WOULD PREFER LOCAL PICK-UP BUT WILL SHIP OR DRIVE A REASONABLE DISTANCE... NO TRADES
Thunder Power TP1430 Charger
opened the box and read the instructions and I cannot charge 3 4S packs at 30 amps at one time so I have to sell. my loss your gain
Excellent Cyril with wing F3B and Fuse F3f , 4 slim hitec hs5125 mg on wing , two mks DS 530 mks on fuse, rds linkage,wiring harness,wingbags,ballast set (wing +fuse), I changed the cubist scheme by
Hangar 9 ShowTime 4D 90 ARF
Selling my 90 showtime with SPE 26cc motor
has specktrum servos
Great Planes Sequence
Airframe only , no electronics or servos ...has a yellow patch where the previous owner tore it while putting carbon gear in it... $125 O.B.O
Seagull Sparrow Hawk 26cc
Sparrow Hawk This is a fast plane... friend had it with a OS 160 twin
120-26cc 71"| wing span no servos or motor
missing wheel skirts $125.00 O.B.O
you can still get the skirts and co
Pilot .20 Acromaster
New in box Quick Build Pilot Acromaster 20.
2 x Align T-Rex 450 clones and an Align scale fuselage
This is a package deal for a bunch of 450 heli size stuff
Included will be:
1. EXI bare bones airframe-Brand new in box, never started
2. Completely Ready to fly (less TX, so BnF) "Mutt"
Aviation Models Yak 54 - 30%
Brand new 30% Aviation Models 30% Yak 54 ARF. Red white and blue color scheme. Includes a second set of New box wings, stabs and rudder.
Aviation Models planes are the earliest versions of t
Aviation Models Yak 54 - 30%
Used Aviation Models 30% Yak 54 ARF. Airframe only in Red White and Black Russian Thunder scheme. Plane is in good condition. It has a fair amount of use on it but still has alot left.
Dave Platt Top Flite SE5A
Precision exact scale SE5A, Designed by Dave Platt and kitted by Top Flight. No decals, wood is good except for radiator detail, Very nicely designed kit 1/6th scale, 53~| wingspan. .40 to .60 glow or
Brat .28 - Reduced
Engine has good compression and smooth bearings. The back plate has been damaged and repaired with JB Weld, but engine still runs great. No glow plug and prop nut is missing. She ain't pretty, but wou
O.S. Engines O.S. .46 LA Blue - Reduced
Nice engine with excellent compression and smooth bushing bearings. Runs perfectly. The glow plug pictured is not included. The plastic needle valve holder has been glued in place with JB Weld, but is
Rear Downforce Spoiler - 1/8 Scale - Off Road
Micro rc systems
Sub micro radio system, 12 sub micro servos, 2 micro receivers, 1 sat receiver, 2 7000kv outrunner motors, 1 transmitter module Futaba.
JR R922 Powersafe Receiver
The R922 PowerSafe™ receiver is designed for models using multiple servos that draw excess current or multiple high-torque servos, such as giant-scale airplanes and jet models. It features a robust po
Rolling electric 4 tec
4wd touring car
Brushless system in pics not included
ProBoat Miss Budweiser Nitro
If your a boat person then you know what ur looking at. This is a 1/12 scale miss budweiser nitro rc boat. Never been used. Never had fuel in tank. The bottom of the hull has a little little cra
JR 8411 gear sets
3 sets JR 8411 gear sets. $39.00 plus $9.00 shipping to lower US.
Composite-ARF Kangaroo ARF
I am selling this Kangaroo for a friend. The plane was flown with a Ram 750 and flew well.
The batteries were showing age and were removed along with the Ram engine and related turbine items. Everyth
Composite-ARF Extra 330L ARF - 3.0m
This is a new in the original box Comp ARF (DR Hobbies) Extra 330 L 3.0m 42% New price $2495.00 plus shipping. Will sell for 1375.00 plus shipping. It can also be picked up in Mt Pleasant, TX. The col
Price reduction..... K&B .67 Outboard Marine
This is a slightly used K&B 11cc Outboard engine with prop.
It does have surface corrosion, the box it was in got rain soaked when the storage shed it was in sprang a leak.
The engine has only been
Top Flite Orion kit
For sale: New in box, Top Flite Orion kit, asking $400.00 shipped anywhere in the lower 48 states.
JR Forza 450 Combo w/ ESC, Servos, Motor and Mini Vbar
The JR Forza 450 Combo is in great Condition, ready to fly with parts and extra 5 batteries, 3 Cell 2250 mah, G8, 70C Thunder Power Batteries!! Needs 2 satellite receivers only for Spectrum Radios!
Traxxas Titan 12T
Kyosho Caliber 30 ARF
Hi and thanks for dropping in to view my ad!
Up for sale is my Brand-new-in-Box Kyosho Caliber 30 ARF (30 class nitro heli).
The ARF package is complete with blades and 30 size engine w/ muffler
MK Arrow 60
Wanted: Wolfgang Matt MK Arrow 60 vintage pattern aircraft. Kit would be first choice. Will consider any.
OS FS 61 Four Stroke Engine NIB
Have for sale this NIB OS .61 four stroke engine. It includes everything that came with it from the factory, all accessories, tools, muffler and original packaging. Includes all the paperwork, templa
MOKI/MARK G140 RC Engine
Hi and Thank You for Viewing My Ad!
This is a BRAND NEW-IN-BOX Moki/Mark G140 RC gasoline (not glow-fuel) engine complete with electronic ignition and custom Bisson inverted muffler. The engine is
Hangar 9 Sukhoi SU-26MM
Equipped with DA 85
All Jr High Voltage servos
Lipo receiver packs
$1,400 local pick up
For get the name of the kit Not the best kit in the world Should fly ok
But what make it sweet is I have a OS wankle mounted on the nose should be very cool in fli
Great Planes Revolver
Great Planes Revolver .61-.91 Sport Aerobatic ARF
Construction: Balsa and ply
Wings: Two piece, foam core balsa sheeted, carbon fiber wing tube
Cowl: Painted fiberglass
DLE 55 AND ALL 444OZ SERVOS ON DX7 RECIEVER. I'M LISTING FOR A QUICK SELL. THIS IS A BIND AND FLY.
CALL ME IF INTERESTED AT 706.414.1592
EG Aircraft 108"
THIS IS THE YELLOW AND BLACK NIGEL LAMB WITH A DLE 111 AND TWO DX7 RECIEVERS AND A123 BATTERIES. ALL HIGH TORGUE SERVOS. I'M NEEDING TO PAY BILLS SO I'M LISTING FOR A QUICK SELL. THIS IS A BIND AND FL
Futaba 9 CAP tx with 3 rx's/charger/manual
Futaba 9CAP transmitter in good condition on channel 46 with three matching Hitec receivers - also included ar charger, original manual and one extra Futaba 46 rx crystal, - all works fine,
Hangar 9 Funtana S 3D .60-.90 $350.00
futana90 with a dle 30cc engine hitec 625 servos on wings and elevator hitec 645 on rudder, futaba617 receiver... futaba 7c radio. plane runs and flys great just charge add fuel and fly....400.00 cash
Byron Craft Cuddler or airplane holder stand
Looking for a Byron Originals Craft Cuddler in working condition. I would pay shipping costs.
2010 wellscargo 5x8 v nose with drop down rear door and a side door.. has inside dome light, the inside roof has been insulated.. has a fire extinguisher mounted on side wall.. it will haul 2 40% airp
Magnum XL-25 w/extras
Good condition lightly used Magnum .25 engine. It comes with two MA 10x4 props, NIP extra glow plug, a 6oz tank good for 10-25min flights depending on throttle usage. It also has the optional remote n
O.S. Engines O.S. 1.20 AX
Used 1/2 season on a profile. Excellent shape. No crashes.
YS Engines .45 FS (Side Exhaust)
NIB YS45FS. A beautiful perfect condition NIB YS motor. Comes with one way valve, needle valve and copy of operating instructions. Paypal only to the contiguous 48 US states. No inte
JR PCM 10X Air
I have a new JR 10X air transmitter, R955S receiver both on Channel 37, charger and instruction manual, transmitter battery is an 1100mah pack that cycles at 878 mah, it may need to be replaced,
35% SD/TOC "X" Treme Hatches
New hatches for 35% SD, TOC Xtreme, Aviation Models.
Box measures 46 Long, 12 wide, and 20 high and weighs 9 pounds.
Shipping seems to be quite pricey, but I have to try.
O.S. Engines O.S. FT-160 Twin
I bought this new in box motor from a member of my RC club. He had planned to use it on a 1/5 scale J-3 and realized it was to large for that model. It was mounted but not run. I have two of these mot
There are 87 propellers in this lot. Entire lot is being sold for $80 shipped CONUS. ! Payment by Paypal.
First group are all are sealed in original plastic bags. 19 in this group. All APC b
Hangar 9 Carden Edition Yak 50cc
Garage Sale Ad!!
Photos of aircraft at: http://www.silentflyers.net/
LOCAL PICKUP PRICES!
2 - Wingo USAs (1-BNF/ 1-72MHz) $230
2- IFOs BNF(1 Mini IFO, 1 Full Size) Plus Case $140
O.S. Engines O.S. .61 FX
OS .61 FX 2 stroke engine.
Very clean, excellent condition
with muffler and muffler mounting bolts.
$100 shipped CONUS.
JR Receivers and Servos
This is a lot (alot!) of JR radio equipment. I acquired these items second hand. I can vouch that my servo tester says that all of these servos work, but I don't have a way to test the receivers. I ca
Everything on this posting is being sold as a lot, meaning all together. Not selling individual pieces. My servo tester gave a thumbs up to all of these servos.
$110 shipped CONUS. Payment via Pay
Hitec Receivers and Servos
This Hitec gear is being sold as a lot, meaning altogether. Not selling individual pieces. I don't have a way to test the receivers, but all servos tested to be in working order.
$100 shipped CONU
Fei Bao MIG-15 (reduced)
FeiBao MIG-15 ready to fly with Jetcat P120 with about 2.5 hours. All digital servos, BVM wheels and brakes, Fromeco voltage regulator, pilot, jetronics sequencing electronic system. Also has electron
JetCat P70 in very good used condition! Back from JetCat service in very good condition (according to John Redmond). New starter motor, new ECU board and serviced (see receipt). Comes with everything
JR & Futaba style Servo Lead Extention Twisted heavy Duty 22AWG
JR & futaba style Servo Lead Extension Twisted heavy Duty 22AWG
Please specify size and style
$2.50 each or 5 for $9.00
message me the sizes you require.
HSP Brushless 1/8 Scale 4WD off road racing buggy 94060
HSP 94060 http://www.hobbyrc.co.nz/hsp-brushless-1-8-scale-4wd-off-road-racing-buggy
Please Check the above link found more info.
HSP Brushless 1/8 Scale 4WD off road racing buggy
Smart-Fly Equalizer II
Small size 1.65~| x .865~| x .375~|
Wide 4.0V to 8.5V operating range
Less than 3.5mA current consumption
Low weight 0.3 oz
Universal connector with 10~| pigtail
Intuitive user inter
New / advanced Flight stabilizer for airplane and multicopter
Most advanced flight stabilizer (gyro) for aircraft and multi-copter on the market today. Ideal for FPV / aerial photography or just fun flying.Right out of the box use or unprecedented set up options
E-Flite Blade SR
Im selling my Blade Sr and I have a lot of extra parts that come with it as well as a battery and all the original packaging and user manual.i forgot to add that I changed the original landing skids f
Selling for a friend
New battery from Horizon
Selling with carrying case
DA 50 Engine W/ Header, Canister, and Extras
Included in this sell: Da50, Header, Front Dump Canister, DA Ignition, 1100 mAh Life Battery, Rcxl Opto Kill Switch, Futaba Throttle Servo and RotoFlow Clunkless Fuel Tank
There are 2 dents in the
R/C KITS MTG. F7F Tigercat Kit
R/C KITS MTG. F7F Tigercat Kit.
No time to build this beauty so it's going up for sale.
F86 Sabre to suit turbine
Im looking for an F86 Sabre kit either an old BVM or Trim air around 60 Inch
any help would be great
E-Flite Blade 120SR BNF "METAL UPGRADED"
for sale a professional on road racing serpent 4WD all belt 2 speed transmission NITRO Engine all aluminum body it's a gorgeous looking car . Mint condition come with remote control ( RTR ) I paid ov
Large Box Of Balsa Wood
This is a box of 160 sheets of 1/16~| X 3~| X 36~| balsa wood. medium to hard density. They would make great wing skins. They are probably not suitable for a weight critical model such as a small elec
40 sheets of 1/8" X 4" X 36" Balsa Wood
1/8~| Thick X 4~| Wide X 36~| Long Balsa sheets. These sheets are of fairly Hard density. They would probably be best for larger airplanes where the need for strength is greater than the need for weig
Corsair Cockpit for Hangar 9 & CARF & Ziroli
All items come assembled and painted. This set includes:
Instrument panel, gun sight, side panel controls, control stick, pedals, seat, harness. Modeler still needs to fix all parts o
Garage Sale Ad!! Engines, Motors, Servos, and Propellers
Going off to school so its time to thin down the collection. Here's what I have:
-16 props (4 Master Airscrew 11x6, 1 Master Airscrew 11x4, 4 Master Airscrew10x6, 4 APC 11x5, 2 APC 10x6, 1 APC 10x9
R/C KITS MTG. F7F Tigercat Kit
R/C KITS MTG. F7F Tigercat Kit.
No time to build this beauty so it's going up for sale.
GIANT SCALE TOP FLIGHT FW-190 1/5TH SCALE
I have for sale a Top Flite FW-190 in 1/5th scale. I don't have the specs on this plane yet. I can check on it later.
It is new in the box and not started at all. It has been opened for inspection
AeroWorks Yak 54 150cc
I am selling my aero-works 150cc yak. I do not fly it as much anymore and hate to see it sitting not being used. It is a very sound airframe and fly's like it is on rails. I hate to do it but rather s
Cool Cap 232/ Chipmunk
FOR SALE: Seagull Cap 232, 90 size, 65~| wing, recovered with Hangar 9 Ultracote to look similar to a Super Chipmunk. Plane flies fantastic. And Super Tigre G2300 ( 1.40 ) with stock muffler and Bisso
NEW IN BOX Hausler 500SE PRO/ TREX 500 Clone RTF
This comes with everything needed to fly! 2.4 radio, battery, and LOTS and Lots of extra parts! This is a GREAT heli. and you won't need to buy anything for some time as there are so many extra parts
Like New 3W-150 TOC
This is a 3W-15cc TOC engine. It has not ran since coming back from 3W. It was sent in to be upgraded to the newer ignition. I thought I would have a plane to put it on, but this isn't going to happe
Like NEW Jet Central RHINO
I have a new back from factory Jet Central RHINO. This was sent in for a check up and while it was there, it was UPGRADED to Full Kero start now! SO it's like getting a NEW ENGINE! Al
Great Planes Piper J-3 Cub (20)
Piper cub has OS Max 25 like new
This cub is a kit not arf.
Needs servos and radio.
local pickup only.
Cannisters & headers
Pair of MTW TD 75 K canister mufflers and stainless headers. They were taken off a DA-100 mounted in 35% Aeroworks YAK. Should also fit DLE-111 engines. Slight dent in one can as shown in picture, oth
yokomo GT-4 RTR
I have 2 gt4 . 1 is ready to run the other is not.
there are like new asking $280 for both.
Call for more info my cell is 646-321-9351.
local pickup only,
Escapade Front cowl 60 size
new in box Did not use. 60 size
local pickup only.
of a gtpe
Nice 1/8 on road. Can include a brushless setup
looking for mini erevo/ summit
Yellow Aircraft F-16 Falcon - 82
UP FOR SALE
Acquired this Yellow Aircraft F-16 that original owner had started work on....never got around to finishing but did acquire a solid used set of gear for it while waiting to do so.
This is a hirobo xspec 60 size heli. it has never been crashed , I've own it for several years. Up for sale is the frame
( NOT THE MOTOR OR PIPE) unless you want it at additional price. my loss you
WANTED - SUPER TIGRE NEEDLES
I'm looking for 2 new & un-used genuine SUPER TIGRE needles for an early 1960's S.T. 56 with the twin needle carb. Yes, I know you can get repro items, but the quality of the threads on those are usua
HPI FIRESTORM BRUSHED !
Got hpi firestorm brushed comes as you see with 2.4 radio system & 2cell used venom lipo battery's also the 12t motor is running slow but will add two extra brushed motors comes as you see need mo
SC10 4x4. ROLLER NO ELECTRONICS !!
Got we'll used sc10 4x4 roller no electronics comes with basher body's I can add servo maybe also comes with under body
Comes with the wheels to not pictured but will send need more info or pics em
You are looking you ara Rjx extreme helicopter.Almost ready to fly.it comes with all the parts you see in the pics, it has never been crashed. this frame is for nitro 50 size Motor. You have enough pa
AeroWorks Yak 54 100cc
Kills me to consider doing this but......
Due to family medical reasons I need to part with my 100cc Aeroworks Yak 54
Bind and FLY!
Jr receiver with dual satelites
DA 100 that has not been in the
OFNA HYPER SCTE 10 roller !
1/10 ofna hyper 10 sct 4x4 roller no electronics I can maybe add the servo need more info or pics email I also can text pics this is sold or traded as is do to the hobby & sport might trade thanks for
Associated xps esc
Up for sale is an associated xps Esc. Originally came with my rc18t. Has 2mm bullets for the motor. Battery connector looks like a deans but is much smaller.
What you see in the picture is what yo
Selling this very nice ready for your radio and motor and stuff , not included, E-flite, Taylor craft 450 ARF.It was flown and had a minor crash , Its been repaired and flown several times since with
Traxxas Revo parts
I no longer have a revo so have no use for this stuff. Battery doors are complete.
What you see in the pic is what you get.
$15 shipped in the US
Trades: let me know what you have.
Top Flite P-47D Thunderbolt - 2.1
Up for sale I have a TopFlite P47 Thunderbolt. I have yet to fly it since I bought it, my intent was to get back into flying but didn't happen. It's a great buy all you need is reciver and batteries a
E-Flite Blade CP parts
This add is for a new EFLH1156 landing skid set cost was $4.99+ tax so around $5.50
EFLH1158 o-ring set cost was $1.99+ tax .25 being $2.24 total for both was about $7.75 will sell for $7.00 shipped
Hirobo Garage Sale Ad!!
the parts im listing is not all I have if you dont see what your looking for ask and i can get a add posted for you thanks for looking.
Part # 0412-130 SD Machanical Mount NIB $10 Shipped
ParkZone Habu BNF
Bought this for my son last year for over $300 with tax he put on shelf and thats were it has sat. It is brand new and has never been out of box so still warranted I will sell for $275 Or B/O Shipped
Great Planes 2-56 threaded Steel Clevis
Would like to sell as a lot tower is selling for 6.79 per box, save over a dollar a box.
45.00 for lot plus shipping and pay pal
Core rc udc 20 lipo balance charger a/c d/citle
I just bought this 3 days ago good friends with local hobby store he orders all for me so ill take the loss hate to mess a good thing up it sells for over $120.00 with tax it dont come with DC cable b
O.S.15 LA Blue NIB w/new 8*4 APC propeller make an offer now
Price includes a 1 new APC 8/4 prop. If you would like a new motor mount (P/N 71909310) please add 15 dollars.
heli parts, rotor blades and tail blades
I have many different tail and rotor blades from 325mm 450 size helis 600mm and 700mm 50 90 size helis woodies, fiberglass, glass fiber align, mavericks have sold. Young bloods have matching tail blad
OXAI Midrex EP
This is a new OXAI Midrex EP with only 20 flights! The same plane Suzuki made it to the finals with in South Africa.
The plane has NO scratched, dents, or hanger rash and is in perfect condition.
AeroWorks Pitts Python
Aeroworks Pitts Python, airframe only, excellent shape. For LPU only. Was set up for a 50cc, has all linkages, very nice air frame. Have additional pix Thanks and may GOD Bless, Terry
Fly Eagle ordinance set for F-15 1/7 scale
New Futaba GV-1
$100.00 shipped US Only
Evolution Engines .61NT
New in the box
$95.00 shipped US only
Associated Monster GT 4.6 SE
Selling my Electric Converted Associated MGT 4.6 Monster Truck
Truck comes with Kershaw Design Gen 2.2 6s Brushless 2364KV 150A ESC Motor System, Steel Spur Gear, pinion and (2) Extra Tires
$30.00 shipped U.S. only
Super Tartan Single on ignition
Super Tartan Single on magneto ignition. Includes muffler, mount, and manual. Length 4 1/2", Width 7 1/2", Weight approx 3 lbs.
Air Hobbies Sachs Dolmar Twin 8.4
Air Hobbies 8.4 (140 cc) Twin engine. Includes muffler / iso-mounts, and electronic ignition. Length approx 8 1/8", Width approx 13 1/2", Weight approx 172 ounces. FREE SHIPPING in CONUS!
3.5" Petes Model Carbon Fiber Spinner
Pete's Model Carbon Fiber Spinner. (As new)
3.5~| | drilled for a DA 50r
2.2oz. (2 blade)
$35.00 shipped US only
HPI Racing Mini RS4 Nitro
Own a piece of RC history! HPI Mini rs4. Great condition, 2spd which is very rare, uncut original body! Alumiunum rear shock tower, aluminum belt tensioner. Stickers, paperwork, spare parts from kit.
E-Flite Blade mSR BNF
Comes with spare tail w/ motor and ~|chassis~| I am selling because a friend and I bought these one weekend and didnt do much with them after that. More into airplanes than helis.
Edge 540 20cc Rx Ready
Edge 540 by Phoenix Models. 65~| wing- 2 piece with aluminum tube. DLE 20cc 6 gal at 32:1 Penzoil. Hitec HS625mg on elevators and ailerons. JR ST126MG on rudder, rudder converted to pull/pull. 2700 MA
O.S. Engines O.S. .15 LA Blue
This is the O. S. Max .15LA Engine with Muffler.
New in box. Only opened to verify the contents.
TRAXXAS NITRO REVO 3.3 .
Got this traxxas 3.3 nitro revo on a trade a while back been sitting not into nitro comes as you see needs to be tuned its I good looking shape need more info email me like I said comes as is do to t
11 Libos 3 and 4 cell 10 to 30C
I have 11 Lipos 3 and 4 cell 10 to 30 C all cycle well and are usable some with dual plug system for esc... Free shipping
TRAXXAS 1/10 SLAYER PRO 3.3 NITRO .
Traxxas slayer pro 3.3 took on a trade needs to be tuned ez start acting up comes with 2.4 traxxas radio & ez start wand .comes as you see it need more info email sold as is do to the hobby & sport
1/8 HPI THOPHY TRUGGY 4.6 NITRO
1/8 hpi 4.6 trophy Truggy I took on a trade comes as you see just need wheels also comes with extra motor also extra parts truggys extra body 2.4 hpi radio needs to be tuned both motors work like I sa
Corsair 50 Cowl $35.00
Need an order for 10 Cowls. Price will be $35-$40 depending on freight. Need a total order for 10 before we can start making a mold. Contact me at email@example.com if interested Keith Knox
This b25 Mitchell is a 71~| wing that came as an arf. Comes with 2 brand new evelution 52 two stroke engines. It's a 40 size plane but I wanted the 52 s so I could run 3 bladed props and still have th
E-Flite Inverza 280, BNF, Local Pickup only
Great flyer. Good pattern plane with 3D characteristics. Limited use, Less than ten (10) total flights. . Requires Spektrum/JR transmitter and flight battery. Horizon price $169. Will sell for
E-Flite 4-Site Ultra Micro, BNF, Local Pickup only
Great indoor flyer or outside on calm days. Biplane with 15.2~| wingspan. Comes complete with numerous batteries. Bind and Fly. All that is needed is a Spektrum/JR transmitter on DSM2 or DSMX.
Ace Seamaster - 40
UP FOR SALE IS A
BRAND NEW IN THE BOX A SEAMASTER kit 40
FLYING WEIGHT 7lbs
ENGINE .40TO .55
4 CH RADIO
Gb-yak 55 1.4m
For sale new never flown gb models yak 55 1.4m it has new hitec 225mg on control surface and hitec 925mg on ruder and a gws on throttle has a new dle 20 only started for 2 minutes so it's basically ne
JETT 50LX ENGINE
50LX SIGNATURE ENGINE BY DUB JETT-
SUPER TIGRE ENGINE-USED EXCELLANT SHAPE-NO MUFFLER
Hobbico Accucycle AC/DC
Hobbico Accucycle AC/DC See specs on line, too many to list here. Needs separate balancer for Li/Po's.
Thunder Tiger X50E Flybarless 600 EP
This is a great helicopter but I'm not comfortable flying it because of its size. I spent many hours building and setting it up. Lots of spare parts. Asking $900.00 for the whole thing. You will
E-FLITE 450 TALYOR CRAFT
Selling a very like new E-Flite 450 Taylor Craft . Have two of these and selling both . This one I bought in a trade as with the other . This one had been in a very very minor landing accident .
2 Hitec Optima 7
Excellent condition Optima 7's with velcro fuzzy on the underside. 2 for $86 shipped. $47 each shipped.
Thunder Tiger ST4-G3 Spektrum SR201 4 Cell Lipo New tires
Thunder Tiger ST4-G3 1/8 Brushless Truggy RTR
Spektrum DX3S with Losi MRX 3000 DSM 2.4GHz Receiver Spektrum LOSB0806
Spektrum SR201 receiver (Extra)
Turnigy 4 Cell 5000 mah Lipo
4 extra new orig
Have a very nice in great shape Older vintage Senior Telemaster from Hobby Lobby that has seen very little use by the looks of it .. Its a very large plane with a 72 inch wing span&nbs
This is a CAI Raptor factory Show Plane. It was profesionaly built by CAI builders. This plane has never flown. Glenis Wheels and Brakes, Robart retacts and Struts. All air rams and retract installed
O.S. Engines O.S. .46 AX
Complete OS .46AX. Never run, no instructions.
Top Gun Champion - Lavochkin LA-7
2011 Top Gun Winner!
This is a chance to own a truly one of the most unique aircrafts around. This LA-7 is a perfect replica with all the scale detail in the mold made from Scale Wings in Austria.
BVM King Cat
UP FOR SALE....
Acquired this beautiful ARTF BVM King Cat as part of a trade.......
All internals just redone in mid-2013.....plane last flown in late summer 2013
King Cat comes minus turbine, re
Great Planes Ryan STA
2 Great planes 1st Ryan STM powered by almost new 4 cyl OS 120III. all you need is your Rx and Battery. Asking for a decent offer. the 2nd one is powered by an 4 cyl OS 91 They both are ready to fl
Great Planes Giant Aeromaster ARF
Excellent condition Giant Aeromaster powered by Fuji 46 gas engine. all hitec servos,
need your Rx an batteries
prefer local p/u, for more info please call
510 914 9195
Thank you for looking
Losi 8ight 2.0 truggy w/ custom body & parts
I'm selling a losi 8ight 2.0 truggy that has 2 bodies, 3 wings, king heads engine mount, v2 shock tower, losi rear hinge pin, gen iii radio tray and a bag of parts. The truggy is in good condition. Ch
Spektrum AR9300 Carbon Fiber RX DSM2
Hi I have a New in the Box Spektrum DSM2 AR9300 RX it is made for the Carbon fiber Fuselage and has never been used. It is double stacked design and has 9 channels. Thanks for looking ***FRE
Custom Saito Valve Covers
Brand new Saito custom valve covers, anodized Red. They fit all small head Saitos .72-.91.Just use the same valves gaskets. They give the engine a whole different look. 1 set= 2 valve covers.
Great Planes SlowPoke Sport - 40
Kit built RTF Slow Poke. This is a great Sunday Flyer. Has a OS 56 Four Stroke. More than enough power. I've flow the plane for several years. So signs of normal wear. Never been crashed. Comes with a
Hi I have a JR 955S Rx for sale it is in very good condition almost like new. It has a channel 55 crystal in it now or can be changed to a 32 channel just let me know at time of sell. Thanks for looki
Skymaster F16 Wings **Brand New**
These are for the 1/6th scale skymaster f16, they are brand new and untouched, just taken out of the bag for the photo.
They have the leading edge slats.
I can take paypal and ship at your expen
Various Airplanes and parts
I have various complete airplanes as well as multiple parts for sale, willing to sell them as a group or as parts. If you are interested contact me Mike
at (704) 287-7991
LOSI TEN SCTE
Brand new SCTE like new Tekin RX8 esc, Tekin Hot Wire, and a like new Tekin SC4 5.5 motor the battery tray, motor mount and side mud guards are used but in good condition, the rest of the truck is br
1/8 OFNA GTP BRUSHLESS .
Got this 1/8 ofna gtp onroad on a trade it comes with brushless system 150 amp hobbyking esc & don't no what kinda of brushless motor. also comes with 3 cell lipo battery I notice the 3 cell battery
E-Flite Blade 400 3D
Radio Gimball Sticks
Have a nice set of Gimball sticks.
Thanks for the interest.
O.S. Engines O.S. .61 FX
Have an excellent 61 with a pitts muffler $175.00 shipped
Excellent condition saito 56 $125.00 shipped
Have a Saito-150 great compression starts easy by flipping the prop. $200 shipped to your door.
E-Flite Carbon-Z™ Yak 54
New bind and fly carbon Z not my cup of tea will trade for gas motor, airframe,
Top Flite P-40E Warhawk - 60
Topflight p40. This was a kit. Comes with 90 degree robart air retracts and aluminum spinner. This plane is flawless. The covering job is impressive. No motor or radio gear. $250. Local pickup only
RCGF GF65 parts
Here is some new spare parts I had for a RCGF 65 cc engine 1. New crank 2. New bearings 3. Several packs of gaskets 4. Used hub part 5. Manaul
Great Planes Extra 300S 1/4 Saucy ARF - 1.60
Brand new!! It has new dla 32 changed the tillotson carb to walbro, had an rcxl ignition that t I had accidentally cut the wires laying around so I installed it. Still have the new dla 32 ignition tha
Boomerang Jets Boomerang Sprint
I have my Sprint on display at my local hobby shop, where I buy most of my R/C related equipment!
It has Hitec servos, a JR 9 channel Rx, with duel Batteries. The batteries need to be checked
Ziroli Beechcraft C-45
Up for sale is a partially completed Nick Ziroli designed Twin Beech D-18 / C-45 Expeditor. I have lost interest in this project and will be moving on to other aircraft.
NEM-Q Q500 racer
Nem-q in very good condition. Composite fuse and wing. Smoothest flying plane I have ever flown. With servos and landing gear.
Add engine and race or just go fast.
Nelson Q40 engine and parts
Used Nelson Q40 and a boat load of parts. What you see is what you get. Bearing replacement tool, head guage dial indicator, etc.
I am selling this because I do not fly it. I am more into my airplanes. I am asking $150 for or or will trade for a OS46AX brand new or hardly used.
i will take money orders only unless we meet som
Jett Q500 engine
JETT Q500 engine, ran at one race. Had a lean run so I bought a new piston sleeve and button.
Never got around to putting it back together and no time now.
Everything in pictur
20 Propellers gas and electric all sizes
Here are 20 composite propellers of all sizes 9 inch to 15 inch electric and gas many different pitches $45.00 Free shipping...
Kondor Model Products P-47D Thunderbolt 91
Wing Set 70+~| Wing Span
Wings ONLY is needed/ wanted.
I have the Silver one with the yellow cowling.
Anyone out there have these ?
WILD HARE R/C EXTRA 300 EXTRA Special
SELLING MY WILD HARE R/C EXTRA 300 SPECIAL AIRPLANE. COMES WITH AN EVOLUTION 58GX ENGINE, WING SERVOS ARE HS5645 DIGITAL, THE RUDDER IS HS5645 DIGITAL, AND THE ELEVATOR SERVOS ARE HS5645 DIGITAL.
Powerbox Royal Spektrum
I have 2 Powerbox Royal Spektrum DSM2 that I used to have it on my jets. Both are in imaculate conditions. The list price is $ 775.95 and I am selling each at $450.00 That includes shipping cost
Futaba GY520 Gyro
Selling a lightly used GY520 Gyro, removed from heli which i sold already, works perfect.
Hirobo SST Eagle FREYA - 60
up for grabs is this awesome heli all you need is batteries and receiver I am no longer flying and just want to clean up asking 1200 or best offer willing to crate and ship at buyers expense this heli
Aeroworks Extra 260 60-90 Size Parts
Crashed the plane. I have both wings 1 has small patch and 1 has minor cut in coating. The empennage and the landing gear. Sell all together.
Email me for additional pictures
$50.00 plus pac
WEEKS SOLUTION X (MILES REED) PRICE RECUCED
3W60 rear carb( engine has two flights on it and hasn't been used in 3-4 yrs.) I had the shingles in my eye and haven't flown since then.
Custom made muffler for the 3W made by Jtec
REDUCED!! Great Planes Ultimate Biplane 40 - AIRFRAME ONLY
AIRFRAME ONLY FOR $200 - REDUCED
20 flights logged to date...recommended for experienced aerobatic flyers.
A few very small spots of "runway Rash" on lower wing tips and bottom of
Clippard BARBED Fitting 1/8 I.D.
Clippert 1/2 long 1/8 ID 10/32 or 5mm thread package of 5 ........ $5.00 free shipping
20013 model traxxas summit
Traxxas summit 1/8 scale brand new the newest model
There pwerplant is brushless castle 1/8 mamba monster 2
Have all boxs the stock motor and ecs also comes with the truck
Castle Creations Berg 4L Receiver, (4) Micro Servos, Free Battery - Free Shipping
1/2A, Small Electric Flight Pack, Berg Micro-Stamp Receiver with Channels 30 & 60 FM Crystalls, Cox Micro-Servos and FREE Cox NIMH Battery
WILL CONSIDER TRADE FOR .15-.25 GLOW ENGINE
Hitec Aurora 9
MTW TD 75K canister (front Dump)
MTW TD 75K canister (front Dump).
This MTW canister was in my 50cc plane. I sold the airframe so this is no longer needed. This sale is only for the canister and coupler.
Asking $110 shipped a
Fuel Air Vents Aluminum 1/8 I.D. 1/4 O.D.
Here 10 Very lite air or fuel or water Vents the fuse or Hull with 1/8th in ID perfect fuel tank vent.. $15.00 for all free shipping in the US
(4) Brand New Airtronics #94102Z Servos Free Shipping
(4) Brand New Airtronics #94102Z Servos
$39.00 Free Shipping & Insurance at This Price.
Sebart Wind S50
New Sebart Wind S50 in the yellow and black scheme.
The plane has been assembled and test flown 3 times to adjust throws and mixes for basic pattern trim.
This offer is just for the airframe. You
Triton Jr Charger with balancer
For sale an Electrifly Triton Jr charger, discharger and cycler with Equinox LiPo balancer. This package includes four balance plugs for 2S, 3S, 4S and 5S LiPo batteries. Will also work with NiCad,
E-Flite Beast 60E
For Sale Like New Two flight only The Beast E60 from E-Flite.
E-flite Motor .60
Castle Creations 100Amp ESC 20Amp Peak BEC Integrated
6xHitec Hi Torque MG Servos 4x Hitec 5245MG 2xHitec 5645MG
Extreme Flight Yak 54 - 88
NO TRADES, THANK YOU...Package sale. I have an ExtremeFlight, 88~| Yak, bind and fly with DLE-55, Spectrum 7010 (DSMX), and mix of Hitec 7950/ 55's. Second complete airframe in identical scheme, bran
UPDATE: DLE 50/100cc Cans
These cans came on a plane I bought and were mounted on a DA100 with about 40 flights on them, cans were bought new for the plane. I was told they were MTW cans but they look to be DLE cans. I would p
EXI 450 HELICOPTERS AND FUTABA RADIO FOR SALE
1 EXI 450 plastic helicopter rtf with 7c Futaba 2.4 heli radio, set up and test flown one time by experienced heli flyer at my club. Includes: align 35 esc, RAIDEN motor, Quark spartan gyro, futaba
Outrage 90 exhaust for OS engines
selling a outrage 90 muffler, works with all os motors, removed from my os motor, needs a little cleaning but great, no dings or dents
O.S. Engines O.S. .91 Max SX Heli
I sold my xcell fury and this motor was in it, ran very well before i removed it, has about 10-15 gallons in it, no hard 3D, may not look pretty in condition because this the Black motor with Gold Coo
Jet Teng JTM L-39 90mm edf
New, 1/2 completed Jet Teng JTM composite L-39 90mm edf in the Brietling scheme. The jet comes with hitec servos, hs-125mg on the elevator and rudder, hs-225mg on the ailerons and hs-225hb on the fla
Hi I have 2-new Brison 3.2 engine for sale they have not been installed or ran at all. They were intended for a twin engine project P-38 but will not be used, I sold the plane. One of the engines have
X BLAZE HULL AND HARDWARE
PRICE REDUCTION, NOW $120 SHIPPED. For sale, a NIB X BLAZE SUPER bare hull . Also included is the following hardware to build this boat.
Aquacraft Revolt rudder, steering rod , boot, strut, motor m
Yak 55SP 3M
Futaba 9CHP PCM Air
3M Extra 260
BJ Craft Episode
Bj Craft Episode with less than 20 flights in excellent condition.
Brand new hacker Q/80 14xs
JR 8411 servos
No receiver or esc.
ARC Exclusiv Modellbau Pitts Special S-1S
UP FOR SALE....
One ARC EMHW Exclusiv Modellbau Pitts S-1S 2.43M
Weight (expected) 33 lb+
This ARC Pitts S-1S was built by
Great Planes Giant Super Sportster
I bought this intending to fly it, but I it will most likely collect dust for a decade or more before I ever find the time to get around to it. Several parts were removed from the box for inspectio
The on Board Digital Display Battery Pack Monitor
Have you or someone you know ever had to make the ~|W
Lanier Laser 200 - 3.2
1/3 scale Laser by Lanier with servos and new G-62 or buy it with out engine and servos and you can put what type you would like this is for local pick-up in Vero b
used robart rotating retracts robart 148
wanted robart no.148 rotating retracts for a giant scale 1/5 topflite corsair. Don't need tires or air supply. willing to pay up to 200.00 for non damaged set .
Balance charger 1-4 cell li-poly/li-fe
I have 6 of these chargers for sale price is for each shipped
Our Best Selling & Most Popular LiPO/LiFe Balance Charger for Airsoft Batteries!
The Tenergy TN267 Balance Ch
Buzz's soldering assistant is a must for all hobby enthusiasts! Assist in soldering multiple connectors including Deans, tamaya, Etc as well as all sizes of bullet connectors including 8MM male/female
Airworld Lightning kit(incl Retracts)
I have taken collection of the Airworld Lightning from our local dealer here in South Africa. Unfortunetaly i do not have the time or space to build this beast. Also the kit includes the re
Top Flite Giant P-51D Mustang RTF
P-51 Mustang ~| Big Beautiful Doll ~| tri gear retracts
Flies very good and fast, the MT 57 gasoline engine works flawless and starts very fast.
all good high torque servos all around
if you a
WTB! Vintage Yokomo YZ-10 / Dogfighter / Works Models
Hello everyone. I'm looking for Yokomo YZ-10 / Dogfighter / Works stuff. I'm looking for just about anything. Complete cars, rollers and/or parts. I'm looking for any help I can get. Thanks!
WTB E plane parts
I am looking for a few items for a new Plane build. I had rather everything be NIB. Please reply via PM.
1- Hacker A50-16S V3 outrunner
1- Hacker X-70-SB-PRO brushless controler (or equivalent)
WTBWTB! Vintage Traxxas TRX-1 / TRX-1 Parts / Rollers Anything!
Hello everyone. I'm looking for Traxxas TRX-1 stuff.. I'mvlooking for just about anything. Complete car, roller and/or parts. I'm looking for any help I can get. Thanks!
Brand new 90mm F18 fiber glass fuselage and wing, ready for maiden come with 90mm Het fan, brushless motor, 100amps Castle Creation Esc, electric retracts and 5 digital servos $485.00 local pickup in
Traxxas 1/16 E-Revo VXL
Asking $325 or best offer
I have this Car. My friend that passed away had this for about 2 weeks before he passed.
When i got it it was just the car with no body and 1 battery and the controller
Here is a 5603 Erevo. Only reason I listed it as ~|good~| is because the wing is cracked(new one ordered). All stock besides the brushless system. It currently has an Orion Neon 8 system in it (water
Byron christen eagle
New in box byron christen eagle with feather kit
I have a extra fuse for a pitts or christen eagle thats been sitting around for over a year now that i will include with a local pick up.
Byron original new in box T34C bonanza with interior kit
Ultra Precision: UP2, UP3, UP4
Selling UP Valves as a bundle:
New Ultra Precision UP4 Valve
Used, good condition UP2 Valve
Used, good condition UP3 Valve
Used, good condition UP4 Valve
Can be sold seperately, just wr
Byron / Iron bay models Waco UPF-7
Looking for the Waco UPF-7. Must be complete.
Heli Artist 450 EC145 Lower Price
This is a new kit with some assembly started with instructions! Also going with the sale is an EXI Hobby frame and four head rotor with four new composite blades and auto rotation main gear. What you
For Sale DLE35-RA with Pitts muffler, manual,ignition and a 42% prod. Mini Thor(a electronic throttle cut off , also allows you to use one battery for ignition and servo power, adj. either 5 or 6volts
Megatech MegaPro Buggy
Megatech Megapro buggy with an associated xp2 radio
1300mah 6cell battery
2 extra motors
3 extra tires/wheels
parkzone 1.2 amp 12volt charger
all you need to run is 8 AA batteries.
Mocking 210 new in box
Brushless HPI mini trophy truck
Here I am offering an HPI Racing Mini Trophy Truck.
Truck is 1/12th scale.
Here is some info on this truck:
-Four wheel drive
-Aluminum suspension uprights
Super Tigre G-4500
Super Tigre G4500 new In box with choice of bisson custom mufflers or slimline muffler
5" Zinger Spinner
I have a new Zinger 5~| Spinner. It is cut for a 30x12 prop but the back plate is not drilled. I decided to stick with the style that has the bolt in the front. PS: There is not really a box!
DA 150 Headers 50mm drop
I have a set of heads for a DA 150. I bought a used DA-150 and the drop was too short. These are 50mm.
Real Flight 6.5
I have a Realflight 6.5 in very good condition. Comes with the standard dvd plus the Airplane mega pak. Had it for maybe 6 months. Works perfectly.
I'm asking 150.00 and will ship it within the lower
Wanted 62" Osiris
Looking for a NIB or low time airframe or RTF plane. Must be willing to ship or meet in Phoenix area. Mike
Thunder Tiger Tiger Trainer - 60 airframe
Up for sale, a Thunder Tiger 60 airframe with four servos.... $40.00... LOCAL PICK UP ONLY... NO SHIPPING.....
Four (4) JR MN48 Servos - $50
For sale are (4) JR MN48 Servos. Three were lightly used and the one on the right is new. They were mounted in an ultra stick that I never flew and sold. $50 shipped to lower 48 states. Thanks for loo
Team Losi 8ight-T new n used parts lot
I have some new and used part in this lot nip flywheel n collet, steel,4shoe 8b,8t ,5x10 HD Clutch Bearing,rear gearbox inserts ,center HD Lightened outdrive set (2): 8/8t and a used upgraded front re
Garage Sale Ad!!
#1 traxxas xl-1 $15
#2 traxxas xl-5 $20 sold
#3 dynamite power pulse $20
#4 axial ae-1 $20
#5 helion ESC and 550 motor 21 t $35 sold
Or trade for 2 WD stampede parts. Mabey trade all
Hangar-9: Yak-54 Carden Canopy
Would like to find a new or gently used canopy for my H9 Carden Yak. Ideally I would just like the clear canopy (part HAN4659) but if it comes with the hatch that is fine.
Let me know what you've g
Yellow Aircraft Starfire II - 82
This jet is built for turbines, it has the pipe installed and servos, it also has the choked down intakes from tam for turbine use.
it has all the control surface servos, 8611's for the elevators a
Slipstream Yak 54
Hitec 7955 all around
Great flying plane
Has no more than 10 fights on plane engine and servos
Has one spot on cowl where plane got lose in trailer going down
Prop Drill Jig for DA / DLE 85-120cc motors
I have for sale a Prop Drill Jig for DA / DLE 85-120cc motors
Futaba Flat Tx NiCd 8-Cell 9.6V 600mAh
I have for sale a Futaba Flat NiCd 8-Cell 9.6V 600mAh Tx Pack. It is new and in good condition.
Gear door and brake valves
3 Valves and 3 servos, nice setup easy to deal with, it will not come mounted to anything
I can ship and paypal at your cost
Superreg for sale with soft switch peg
I will ship and paypal at your cost
G-Mark 30 opposed engine
Great Planes Electrifly Ammo 20-40-3500 In-Runner Brushless Motor
I have for sale a Great Planes Electrifly Ammo 20-40-3500 In-Runner Brushless Motor that is in good condition. Never crashed.
Used but works well, this serves as a servo balancer as well as distribution its a great unit
I will ship and take paypal at your expense
Jet Tronics Sequencer
sequencer for sale, works well just don't need it anymore.
I will ship and accept paypal at your expense
BVM Smooth stop
Smooth stop for sale, works fine in used condition
shipping is fine at your cost, paypal is good for me.
Blade 425mm FB Carbon Blades NEW
I have for sale a New set of Blade 425mm Carbon Blades that fit a 500 size heli.. These came with a Blade 500 3D.. I have been using a different set of blades since new.. The blades and washers are in
Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo 3000 mAh and 2 inserts (one of each size).
We deliver the starter with both inserts - which works on most spinners. If you would like only one inser
WAS INSTALLED IN PLANE BUT NOT FLOWN THANKS
1/6 scale f16 for sale, has been crashed, lots of damage to the underside, it can all be repaired, the stabs and wings seem good accept paint.
it comes with nothing else, just the airframe.
Complete Hangar & Shop Sale!
Super Garage/Estate Sale
My entire RC Fleet and Shop must go. Shop tools include a complete Sherline CNC shop: 4 axis Mill, Lathe, Computer and nearly every accessory made by sherline...all in exce
Traxxas 1/16 E-Revo VXL w/Extras
Traxxas 1/16 E-Revo VXL for sale with extras. Truck was bought in late December 2013, so is about 3 months old, and has been driven roughly a dozen times. Tuck in very good condition overall, with som
Skymaster F-18 E/F Super Hornet
Skymaster f18f, this plane has been crashed, it has several cracks in the fuselage and stabs. this is a builders special with a little time it can fly again.
I believe everything you need is there
Pletty Evo 30/10
Was in a pattern plane. Motor has always flown great with no problems.
Composite-ARF Extra 260 3m
Composite ARF EXTRA 260 3M
NEVER FLOWN METICULOUSLY CONSTRUCTED CUSTOM RED KIWI SCHEME (see pictures)
Aircraft is in PERFECT condition and ALL PARTS ARE BRAND NEW-----NO used parts
12x for sale, running dsmx not dsm2.
It has the charger, 2 batteries a neck strap and a carry case included in the price
everything is in used condition, The radio works great and is nice but t
3W 3W 140 mufflers
im looking for a pair of mufflers or headers for a 3w 140
Hitec 7955TG servos (x4)
The four servos are in good working order. They were in my 30cc plane and sold the airframe so I no longer need them.
Asking $75 each or $300 for all four
K&B Red Head 2 glow plug engine
Traxxas E-Maxx 16.8V
New in box only tested awsome selling for 400.00 ready for 7.4 lipo batt not included
BME BME-44 Pitts muffler
Lost original muffler bought this one found the old one.
Sig Extra 300XS with FPE 2.4 RTF Minus Receiver
The airplane is a Sig Extra 300XS. I bought this plane a year ago, made some improvements, put a new FPE 2.4 on it, and flew it around 25-30 times. After that (November 2013), I decided to take the pl
BRAND NEW IN BOX QUAD COPTER 1SQVCAM ELECTRIC GREAT STABLITITY READY TO FLY VERSION RTF IS 99.00 COMPLETE WiTH BATT CHARGER AND SPARE PROPSselling for79.00 or best offer
wof tunnel hull
Bought this last year USED its a 3.5 jerry dunlop hull 29 inches long and is wood over foam and did not do anything to it so time to sell for someone who wants to build it.Its in descent shape i did r
AquaCraft Rio 51
Brand new in original box. Paid $850. Will take $625.
An amazing boat: http://www.rcuniverse.com/magazine/article_display.cfm?article_id=977
seven JR DS8611A servos
i have seven of these. they work fine and have no spliced wires. $68 plus $5 shipping each or $450 shipped for all of them
JR DS8711 servo with SWB arm
nice 8711 servo with swb arm...no spliced wires. works fine
Traxxas Slash 4X4 Ultimate
Traxxas slash 4x4 (6808)
Stock road venture mt tire and rims
Traxxas long charger Traxxas ez-peak charger
Four Pro line hot shots tires mounted on renegade black whee
ALIGN 700 N flybarless
I HAVE AN ALIGN 700 PRO N.TONS OF UPGRADES COMES WITH AN O.S. MAX 91HZ-R,THE RECIEVER IS A AR7110R. MICROBEAST NO LIPO BATT. TAIL SERVO IS A FUTABA S9256,THROTTLE IS A JR DS8717, THE OTHER 3 SERVOS AR
Troy Built Models Shokjet
Ok, sorry guys I thought that everything was listed in the description, but I guess it did not. This plane is powered by a low time Jet cat P-70 with FOD screen. The ECU has recently been sent in to J
3W 60i Gas Engine
I have a 3W 60i gasoline engine that’s never been run. This engine was purchased a few years ago for a project that never got completed. The airframe’s gone so now this motor must sadly go too. The
Phoenix Spitfire 40 ARF - Completely Built - FREE SHIPPING
Phoenix Models Spitfire .40 ARF Ready to Fly (Add Engine & Radio)
Phoenix Models Spitfire. 40 ARF, built and ready to fly. Has factory mechanical retracts and fuel tank. Included are New and Un
spektrum SPMXP8000 x-plus module
Brand new still sealed 89.99 plus tax new!!
Spektrum SR 3500
All in good working order
$30.00 each or $75.00 for all 3 O.B.O
PRICE LOWERED AGAIN
Composite-ARF Ultra Lightning Wing
I have a Rt Wing for sale, in Excellent Condition.
Right Wing $300.00
Please add for shipping
PayPal users, please add fees