RCUniverse Classified Ad Market Archive

Showing Listings No. 1201-1500 of 20000

   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67 
 
JR XG8 8-Ch DMSS Transmitter, Black - With RG712BX 7Ch. DMSS XBus Rx
XG8 8-Ch DMSS Transmitter, Black - With RG712BX 7Ch. DMSS XBus Rx Part Number: JRP00658 You may Call me@302-875-3602 to discuss offers Retail: MAP: $609.9

New in Box DLA 58cc
I am selling a new in box DLA 58 cc, I got the engine brand new at Toledo Show in Ohio.

Top Flite P-51D Mustang - 1/5 ARF
I bought this back earlier this spring from a gentleman and have not flown it myself. It has Robart air retracts, mains and tail, Hitec 645 MG servos on the flight surfaces with a couple standards on

World Models AT-6 1/7 Scale
I bought a while back from a local flyer a World Models 72~| Texan ARF. It flew two times with a DLE 20 in the nose. He never installed the cowling. I bought it, installed a Zenoah 20 and cut the cowl

TAFT HOBBY CONTROL BOARD
I have 2 Taft Hobby control boards which I removed from their Cobra EDF jet. They're brand new, and never used. I modified both planes right out of the box and bypassed these boards. Comes with

Ohio Model Products Yak-54 Profile
Perfect flying aircraft....no longer flying RC. Futaba servos, GMS .45 motor, rx, battery and prop included. Ready to fly..just add gas. Local pickup preferred, but will work out shipping for you.

Sig Kadet Senior - 46
Red Sig Cadet ARF .46 size Brand new condition. Only owned for 2 years and rarely flown. Super Tiger .45 Motor + Prop Futaba servos all around Add rx and fly

JR COLT 6CH 2.4GHz DMSS Retro System
COLT 6CH 2.4GHz DMSS Retro System Part Number: JRP07432 Retail:$899.99 MAP:$499.99 Overview JR - JRP07432 - COLT 6CH 2.4GHz DMSS Retro System Step back to the Future!

HARD TRANSMITTER CASES
I have several industrial boxes for sale than can be used to store TRANSMITTERS, GUNS, BATTERIES, etc.... (Yes, the DX18 fits with about 1/4~| space on each side.) They look like and probably are ma

3W Bearcat
3W Bearcat, South Vietnamese Air force RTF. Built and painted by Graham Buchanan Tiger Models in England. Purchased used from him a few months back and have not flown it. Graham has flown it severa

1/4 scale Jodel
Modeled after full size home built. entire model was stripped and re-covered with 21st Century and enamel paint. Was featured in Model Aviation on 'how to recover model'. Span 100~|, two piece wing, G

72" Marquart Charger and others
For Sale short Kits: EAA Bipe-80~|-$189.99 EAA Bipe-88~|-$199.99 L4/NE1/J3 Cub-129~|-$279.99 Flybaby-84~|-$189.99 WW1 Bristol Scout-97~|-$249.99 Miss Los Angeles-72~|-$209.99 Miss Los Angeles-

Quadra 35 Gas
Slightly used complete with B&B muff, brand new spring starter, and Dario Brisaglla custom fly wheel. Plenty of life left. 772-460-6436 for any questions. Walt .

Zenoah G-62
New in box with C & H electric quick start. Questions 772-460-6436 buyer pays shipping and pay pal cost.

JR X9303 Transmitter
Selling my JR X9303 DSM 2 Transmitter. Used but in good condition. Has not been used for the last 2 years. I did a couple tests flights with it last week to make sure everything work OK and it is. S

Castle Link USB Programming Adapter
Castle Creations Castle Link USB Programming Adapter, used twice. Price is $16 plus $4 shipping. Please add $1 for Paypal payments to cover the fees. Thanks for looking, Jim

Top Flite Precision Magnetic Balancer
Top Flite Precision Magnetic Balancer Balance props, wheels, spinners and more — with accuracy never before possible! Airplane and boat props, car wheels and tires, clutch bells, ducted fan jet roto

Airplane Holders
I have 2 of these airplane holders left to sell for just $15 each. These will hold your plane at the stab while you start the engine. It will probably cost at least $25 to ship one of these, so I do

Servo Plugs and Wire
I have a bunch of assorted servo plugs and wires for sale. There are: 2- 55~| wires with female plugs on one end 2- 36~| wires with male plugs on one end 2- 32~| wires with female plugs on one end

Servo Extensions Galore
I have 95 servo extensions for sale. They have JR / Hitec plugs on them. These are the good ones.... most of them are gold plated, 22ga from Air Wild Hobbies. A few are smaller gauge (lighter) for sma

Mounts for Satellite rx's
I have over 100 mounts for satellite rx's. Can be used to mount other things as well. Two different types. One type is a plastic mounting base with self stick pad on the back of it. The other type is

Hangar 9 Pulse 125 FUSE only
I am selling a Hanger 9 Pulse 125 FUSE w/ hatch. It is new in the box never used. I bought it for a spare after I heard Hanger 9 was dropping the Pulse 125 from it's line-up. Since I have recently sol

Thunder Power RC TP610C AC/DC Charger
New in 2016. Charger has approximately 55 hours of use and works great. Comes with everything pictured, you will have to add a harness. Thanks for looking, let me know what questions you may have.

AeroWorks P-51 Mustang
Some of you may remember this airplane rebuild here on RC Universe. I picked up this airplane after it suffered a wing dowel departure from the wing on the first or second flight. I painstakingly re

O.S. Engines O.S. .55 AX
OS 55 AX, Used, Excellent condition, No damage, good compression and turns freely. $5.00 S/H to lower 48 states

Bf109 1/4.9 kit Competition Scale
Evil, wicked, mean and scale!! 1/4.9th span 80~| The model was developed using factory drawings to maintain strict scale accuracy. It uses the scale NACA 2R1 14.2 airfoil at the root converg

Blade 300 CFX
Great flying helicopter! Very clean and in excellent condition. Everything works perfect, is straight and adjusted. Additional photos available upon request. Would be willing to ship in its

Blade 450 3D
Great flying helicopter! Very clean and in excellent condition. Everything works perfect, is straight and adjusted. Some new parts are included. Additional photos available upon request. Do

Hangar 9 Funtana S 3D .60-.90 ARF
Hangar 9 Funtana 90 with Zenoah 26 Gasoline Engine: $350.00 I'm selling my Funtana 90 because I have a plane that is a bit larger and has almost the exact same flight characteristics. The plane does

Extreme Flight 76" (83") MXS Southern IN
I have a really nice Extreme Flight MXS for sale. I bought it a while back of Jeff Williams a team EF pilot. Jeff had it set up for a DA 50 on a ES composite Pipe. I changed it to a DA side dump muffl

Align STQ 100
Align Superior Starter STQ 100 (for Helicopter) Feature Highlights: ? Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transpor

Raptor 50 RTF
I have a raptor 50 in new condition with PRO 50 h and muffler..engine..no crashes comes with pro blades gy 401 gyro..futaba 9254 tail servo.extra frame with clutch bell motor mount and aluminum head.

Aeroworks 30cc Red Bravata
I have for sale all the main parts to make up the AW 30cc Bravata. This is the Red and Creme color. the things that are missing are the side windows, most hardware except for the control horns,decals.

FrSky 2.4Ghz Futaba conversion module+Rx
Hi! I am selling a very nice 2.4Ghz module that I bought for my Futaba 10C Air at 72Mhz. Its the FrSky 2.4Ghz DFT module with an 8ch Rx (V8FR-II receiver) Still in the original box, excell

2 A-10's for sale
I am selling 2 Blitsworks RC A-10's. One is Ready to fly minus receiver, the other is NEW in BOX..The one in the box is the Kit form. A 4000 mha 6s battery is included... Shipping will cost too much

EFlite Convergence VTOL BNF
For Sale : Convergence VTOL BNF New still in Box...Hovered once in Back Yard...Just not for me ! Local pick up only... $225.00 OBO Thanks for looking !

Eflite Mystique 2.9m (114"in) sail plane
For sale is an Eflite Mystique 2.9m (114~|in) sailplane. This sailplane is assembled, servos and motor installed but has never been flown. The Mystique can be found on Horizon Hobby web site for 369.9

AeroWorks Extra 260 50cc
I have NIB Aeroworks 50cc Extra 260 that is the Yellow checkerboard scheme. 425.00 PLUS SHIPPING. There are two boxes.

Bill Hemple 50% BD5
This is a 50% Scale BD5 Painted in JR Colors with a Brand new (has less than 2 hours on Radio) 28X Add $1700.00 The plane is professionally built and has ALL JR Servos.. JetCat140 and Xicoy flight

Garage Sale Ad!!
Bunch of speed controller and BEC, what You see is what You get !!!

500 Goblin USA RTF
500 Goblin USA Edition #033 Motor: Goblin Edition Speed Controller: Hobbywing Platium 100amp Cyclic Servos: 3 KST 05589M6 Rudder Servo: 1 KST 05525M6 Spare Parts: An extra set of Carbon Main a

K180 kerostart
Low time K180G kerostart, selling the airframe so this needs to go as well.... Comes with everything, GSU, ECU, Pump, kerovalves, cabling, front mesh

Desert Aircraft DA-100- 0 run time
New DA-100 twin for sale. Everything is new on this engine , electronic ignition, and stock mufflers. Look at the specs. for futher information. I mounted the engine on my Extra so the cowl coul

Balsa USA Fokker Eindecker
BALSA USA, EINDECKER, 1/4 SCALE. G-20 ENGINE, ROTO-FLOW FUEL TANK, READY TO FLY, ALL YOU NEED IS YOUR RECEIVER. LOCAL PICK UP.

World Models Piper J-3 - 1/4
WORLD MODEL 1/4 SCALE J-3 CUB, READY TO FLY, ALL FUTABA SERVOS, 2000 NIMI BATTERY, ROTO-FLOW FUEL TANK, G-38 WITH SPRING START, COMES WITH FLOATS, STILL FLYING THIS PLANE THIS YEAR, ALL YOU NEED IS YO

Top Flite P-40 Warhawk - 1/5
TOP FLIGHT P-40, DLE-55 ENGINE, ROBART ELECTRIC RETRACTS, ROTO-FLOW FUEL TANK, FUTABA METAL GEAR SERVO'S. S3305, 124 OZ,  RECIVER BATTERY, 4000 NIMI, ENGINE BATTERY 2500 MINI, 21 LBS. HAS BEEN FL

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. Much lighter and eaiser to manage th

ViperJet 250 Zeal Jets
Zeal Viperjet ( Carf type ) with all JR 8911 servos, Powerbox Champion SRS ( Futaba set up ). Electron electric R40Evo Retract and brakes with digital programmer/sequencer with touch screen. ( LG15

FMS Pilatus PC 21
This is a brand new FMS Pilatus PC 21. I modified the fusleage in front of the stock servo tray to be able to move the battery forward to get the CG right, only has 5 flights, I broke the very tip

2-Hirobo Evo .50 (airframes only)plus parts
I got out of helis for a little while and selling these two Hirobo Evo .50 airframes . Like new and are in nice shape and complete. I did convert these to electric (removed all electric hardware and

Pilot Piper Tomahawk Ok Model Company (FREE SHIPPING)
Rare Pilot Piper Tomahawk (Ok Model Company). For all you collectors out there of vintage Pilot kits, for sale is an hard-to-find and rare scale RC model of the Tomahawk. The contents of the kit are i

Hangar 9 Extra 330S 33% Right Wing
Up for sale is a right wing for a Hangar 9 33% Extra 330s. I originally bought this as a backup. However, it's just taking up room and would like to free up some space. The wing and covering are in mi

1/6 scale FW 190/ Ta 152 resin exhaust stacks
Set of 1/6 scale resin exhaust stacks for David Andersons 1/6 th scale Ta 152..

1/6.5 focke wulf resin exhaust stacks
Set of Resin Exhaust stacks for 1 /6.5 pica or topflite Fw 190 D

Turbine Jet Engine For Sale
Just reduced. I'm selling this jet engine for my mom as it was my Dad's who passed away about a year ago. I know it runs well as I remember him firing it up a few different times but that's about al

F-9-F Panther
I am selling my Dads F9F Panther Jet with a P70 jet engine. It appears to be in excellent condition and looks to be fully assembled. I don't think it was ever flown due to my Dads condition by the t

Great Planes Yak 54 - 25%
Looking specifically for the landing gear, new, unused. Possibly other parts if you have them and want to get rid of them. Mac

Jett .40 426 Capps Racing engine
Excellent running and very strong Jett .40 with Jett Black Racing Pipe. The exhaust port has been slightly raised from stock for a little more RPM. Great compression, smooth bearings, Afterun oil was

Futaba Servo Extension
This is a Aileron Servo Extension with Futaba J Connectors. This extension goes between the receiver and the aileron servo to make the wire longer. On one end of the wire is a male ~|J~| connector a

Pro Heavy Duty Futaba J Servo Y Harness Connectors
(2) Pro Heavy Duty Futaba J Servo Y Harness Connectors. (24 inch.) Retails $12.00 each SAVE YOURSELF SOME MONEY YOURS FOR $15.00 Plus Postage. Email me for Photos

Futaba Switch Harness w/Charge Plug Futaba J
NEW Futaba Switch Harness w/Charge Plug Futaba J $6.00 PLUS POSTAGE EMAIL ME FOR PHOTOS

SPECTRUM A500 METAL GEAR SERVOS
SET OF 6 A500 SPECTRUM METAL GEAR SERVOS

JR DS8411
For sale are four JR 8411 in good working condition. $45.00 each shipped or all four for $175.00 shipped(US). Thanks,Joe.

JR DS8711
For sale are two JR 8711 in excellent condition. $140.00 both shipped(US) Thanks,Joe.

SPECTRUM AR636A RECEIVER WITH AS3X
SPECTRUM AR636A RECEIVER WITH AS3X FROM CARBON Z  T28 PERFECT

Hitec HS-7955TG
For sale are two Hitec HS-7955TG in very good working condition. $100.00 for both shipped (US).

JR 4721 Ultra Torque
For sale are two NIB JR 4721 servos NIB. $80.00 for both shipped (US).

EFLITE CARBON Z T28 ELECTRIC RETRACTS
EFLITE COMPLETE SET OF ELECTRIC RETRACTS FROM CARBON Z T28 MAIN GEAR AND NOSE GEAR WITH STRUTS WORK PERFECTLY

**NIB Enya 90 -4C 4 Stroke Engine**
Never mounted or ran!! Hard to find, this is the newer version of the Enya 90-4C with both Low and High needles. I also have (3) EXTRA New Enya No.3 Glow Plugs that I will include! Thanks for l

Hitec X4 Multi Charger
For sale is a NIB Hitec X4 Multi Charger with four balance ports.Model # 44151 $109.00 shipped(US).

BLOW-OUT sale! PT-17 Stearman
Great Planes Stearman PT17 up or sale. Covered with fabric. Almost brand new OS 4 stroke FS-120S III Pumped version engine, willing to separate if buyer doesn't need her. I have the OS box, manual a

AeroWorks Yak 54 - 85cc
This is the Aeroworks 85cc Yak-54 ARF-QB It assembled and ready to fly (balanced) just install your receiver and go. DA 85cc engine and DA muffler with approx 1 gallon of fuel through it 4 Fro

EFLITE 70 AMP ESC EFLA1070EC5
EFLITE 70 AMP ESC PART NUMBER EFLA107OEC5

ENGINE MOUNTS, Dave Brown, J'Tec
These are glass-filled, nylon engine mounts and two (2) J'Tec aluminum mounts, NIB Including: (3) DB, 1.20 Glass-filled nylon (1) DB, .30-.35 Glass-filled nylon

E-Flite Power 60 BL - 400KV
EFLITE 60BL OUTRUNNER 500KV PART NUMBER EFLM1315   picture shows a 400 kv this is a 500kv out of a carbonz t28

F2G Corsair
This is a new in box all composite F2G corsair from R/C Scale All Composite (rcscaleallcomposite.com). This sale also includes the recommended Robart heavy duty scale rotating landing gear, Sierra sca

5 APC Props...
I have 5 APC props NIB... 4 -- 13x6 1 -- 14x6 FREE SHIPPING...

Yellow Aircraft P-47
This is a P-47 Razorback, professionally built with only a few flights. It includes: Zenoah G-45, 32oz. fuel tank, Hitec 645 servos, Sierra landing gear, scale wheels, inner and tail wheel gear doors,

ENGINE MOUNTS, Dubro Vibration Reducing
These are Dubro Vibration Reducing engine mounts, NIB Include: (2) .50 - .75 size complete mount kits (1) .75 - .1.08 size complete kit (1) >25 - .50 size complete

Futaba 18MZ
It has been used mostly in the house setting up a bomber we had. Pretty much like new condition. We bought this radio from Tower Hobbies when they first came out. I would like to sell local but wo

ENGINE MOUNTS, Sullivan Flex Mounts
These are NIB, Sullivan Flex Isolation Engine Mounts. Some are complete kits where as others are just the rubber mounts Includes: (3) sets, .40 -.60 Rubber isolators (2) sets, .9

Air System Components
Bag of air components like unused tubing; large new tank; small tank; tees and 3 valves;.... etc.

Garage Sale Ad # 2 !!! New Stuff!!!! Updated Offers Bundles!!!
Garage Sale Bundled Items are New or Light Used (LU) —————————————> Make Your Own Bundles Pick Any 4 Items for Each Bundle Individual Items Count as 1 Item Towards a Bundle $60 for 1 Bundle $1

Balsa USA Morane Saulnier - 1/3
Balsa USA 1/3 scale Morane Saulnier. Has a g62 with a spring start Hitec 645 servos . Very nice airplane feel free to ask any questions. To big to ship.

Bonanza/T-34 Retractable Landing Gear
I have for sale a set of retractable landing gear for the top flite T-34/Bonanza. This landing gear was mounted on a T-34 but was never flown.

5" dia. Spitfire Spinner
5~| diameter spun aluminum Spitfire spinner suitable for large PICA/Platt kit or similar.

5" dia. P51 Spinner
5~| diameter P51 spun aluminum spinner.

Marutaka JU-87 Stuka - 60
Looking for Wheel Pants for same

CMP Me109 F/G 1/5 flying spinner
Spun aluminum spinners for Me109 in 1/5 scale.2 available. Comes uncut with mounting screws. In inches diameter 148 mm (5.820~|) length 4.5~| Back plate is CNC and lightened. JG

CB Spinner for FW190-D9 or TA152
CB Spinner 4.25~| diameter, 5~| long. 2 bladed prop cut out. Suitable for a Fw190-D9 or TA152.

Robart FW190 Retracts
Robart pneumatic retracts for a Fw190 up to 14 lbs. in weight. Suitable for a Pica/Platt D9 on up. Included is a selector valve and air tank. Retraction angle is 74 degrees, up and down locks, fits

YAK 54F
EXTREME FLIGHT YAK 54E qik54 Mostly assembled and in excellent condition. includes instruction manual, 4 JR Sport ST125 MG servos. 1 on pull pull Rudder, 1 on elevator. 2 on ailerons. Includes Ha

Hacker Q80-13XS
This motor is little bit too hot for me. Need to wait 10-15 min between flights. Pulled it out of the plane, no original box (bought plane with the motor installed). Accepting paypal or cash

DJI SPARK, Mavic, Phantom 4 & Inspire
New store and we are offering 25% on our entire store this week only and on these specific drones. To purchase go to www.airbuzzers.com

Boomerang Elan
Boomerang Elan, KingTeck 80, Futaba radio, trailing link gear, RTF. Local club member bought and built a couple of years ago. Another local club member test flew it, perfect, no problems. Club member

Dynaflite PT-19 (1.08)
Dynaflite PT-19 is in perfect condition, built to museum quality! The plane is built to full scale design including three piece wing and baggage box behind the rear cockpit to install the switch

Saito FA-30S GK
This little four stroke is new and in the box. Never seen fuel or was ever mounted.

OS GT 33
This OS GT 33 is new in the box with muffler, ignition, three spark plugs, and four OS stand off mounts. Everything is new and unused. Engine has never seen fuel or was it ever mounted. I am the ori

ME109G
I have this beautiful CY Models ME109G for sale. 96 inch wingspan. Fiberglass fuselage, built up wing and horizontal stabilizer. It's powered by a ZDZ 80 (single cylinder) engine and has a 3 bladed B

Hangar 9 Extra 330L (1/3)
I have 2 one is new needs to be finish no engine and no servos $350.00 second one is used in good condition with servos no engine i got this plane on a trade I believe it had a zenoah 80cc I instal

Futaba R617FS 2.4
Used Futaba R617FS 2.4ghz Fasst RC airplane/helicopter receiver. Will work with any Futaba Fasst System. SPECS: Size: 1.6 x 1.1 x .35~| (40 x 27 x 9mm) Power Requirement: 4.8 - 6V Cur

Fr sky 9ch 2.4
New in the boxFrSky L9R long range receiver 2.4ghz L9R receivers boast reception sensitivity that doubles the range of existing FrSky X Series receivers. The L9R supports 9 standard servo outputs

Miniature Aircraft USA X-Cell 1005 Gas Graphite
Newly assembled, never flown or started. All is new. All manuals, stickers and some spare parts. No electronics.

Dromida drone
Comes with remote, battery, charger and extra set of props and parts needed The Frame is brand new Comes with new props Needs one new motor 239-776-9544

S033G 3ch coaxle Rc electric Helicopter
This is new in the box Ready to fly comes with remote, battery and charger The Helicopter is 3ch and about 3' long it's big! 239-776-9544

E-Flite Blade CX 4
This has been flown a few times and body cover is slightly cracked from a hard landing I think it will need a new set of blades 239-776-9544 This is the Blade CX4 Micro Coaxial Ready-To-Fly Elect

Goldberg Piper Cub anniversary edition Electric with landing gear and Floats
Electric anniversary edition Goldberg Cub Has .50 electric engine running 3s setup Ready to fly with your receiver and lipo battery Comes with floats and extra spare landing gear Cub Wingspa

JMP F-4 Intake ducts for 5" fans
I have the intake ducts for the turbine version but need the ducts for the fan version.

CARF Skygate L-39
I'm selling my CARF/Skygate L-39. It's a big (119~| long & 93~| wing span) jet. It has a Behotec JB220 (50lb thrust) turbine, Powerbox Royal with integrated 3 axis gyro, all high quality servos, wor

Hangar 9 T34 Mentor
NIB or partly assembled. Must be willing to ship to 78746

Top Flite P-47D Thunderbolt ARF
Was purchased as a kit. Built a few other planes prior to this one and all of them flown well. This was to be a intermediate to advanced plane due to all of its control surfaces and its length it ne

Funkey Hughes 500 - Fuselage (32-46)
Was crashed yesterday afternoon fuselage Survived. Rotor head bent. No electronics or esc or motor $50.00 Can be texted at 305 216 1632 LOCAL PICKUP ONLY NO SHIPPING

30cc Funtana Pro Stick Built Kit by Modelbau (Price Reduction)
Price Reduction AGAIN .... (How about some feedback ie Price too High not enought offered give some ides on what I need to do to sell this Brid - No hard feelings on your comments to me -) I will

Dean's Marine Cargo Ship City of Ely
Have a new in box merchant ship called 'City of Ely'. Want something different at the lake? Then this is it ! This kit consists of a 54.5~| fiberglass hull, cast metal and resin fittings, stuffing t

Anderson Kingfisher 1/4 scale w/NIB SV-26 Engine
FOR SALE: Anderson Kingfisher Kit (1/4 scale) with NIB SV-26 OL: 70.0 OW:`108.0 AUW: approx. 20-25 lbs depending on engine choice, finish etc. I've always wanted to build/fly one of these beau

LIKE NEW FOX EAGLE 60 Ring
Selling my vintage Fox Eagle 60 ring rc engine with muffler. LIKE NEW It is in excellent condition, smoooooth bearings and great compression. Has been well oiled and stored indoors. A great engine f

Vintage brand new testors .19 R/C
Brand new vintage Testors .19 R/C eng. w/ring and original perry carb. A collectors special. just can't fine these anymore, especially brand new. never mounted or ran and has been kept well oiled

NOS Fox Hawk factory tuned exhaust
Vintage NOS Fox factory tuned 1 piece exhaust. PRICE IS FIRM AND I WILL NOT CONSIDER LOW BALL OFFERS!!!!!!!!

Yellow F4 Phantom NEW all the Glass parts will trade! I have enough 2 build the Jet!!!!! will trade!
Hello, I have all the fiberglass parts and manual for the Yellow Aircraft F4 Phantom. I also have the NEW wood sheeted stabs. I have the NEW wings/ ones NEW perfect/ the other wing is broke in half/ b

Kangke Monocoupe
I am cutting down the fleet, and moving out of the state.   Plane is in excellent Condition. It does need some minor work on the servo tray.  Gas Motor, looks like a Sato or Quatro . This pl

WIRE WHEELS
WIRE WHEELS : 4 and 1/4~| New. Proctor wheels distributed by E.B Wire Wheels, years back. $70 plus $10 shipping. Thanks for looking.

Stinson Reliant
Here is a beautiful Stinson Reliant. It has a evolution .60 engine. This plane has never been damaged or abused. Only a few flights. No tears or rips in covering. It has a 68~| wingspan. RTF, just add

Byron 1/6 Scale P47 Bubble Canopy
New! Made with .040 PETG clear and durable.. Length 16 inch x width 6 inch x Height 5 inch

Murutaka 1/5 scale Bird Dog Windshield Set
This is a complete set....

Byron F16 Canopy & Cockpit
New Byron F16 Canopy plus cockpit, seat back, dash insert and instructions. For quick response email scaledynamics@yahoo.com

Proctor Fokker DVII
Virgin kit with options! Scale wheels, machine guns and instruments. Wings span 83 inches, length 69 inches. Most of the specs are shown in the picture of the box top. I hate to part with this one, bu

Sig Rascal 110
This is a brand new 1 month old (red) sig rascal 110 with flaps.Still in box, only opened for inspection. Electric,gas or nitro.hate to sell it but decided on going with a different project. These ar

BVM Super Bandit 3 Main NEW Struts
BVM SUPER BANDIT 3 Main Struts That are NEW!!! Retail Price $315

Sig Piper J-3 Cub 1/5 NIB kit
I have for sale a new in box Sig 1/5 scale Cub kit. It's still factory sealed. This is all laser cut. Asking $200 plus shipping. Would prefer a local pickup. US Postal Service money order only. No Pay

Robart 1/5 scale Cub gear/New in box
I have for sale a new in box set of Robart 1/5 scale Cub landing gear. Has not been mounted. Asking $100 plus shipping. US Postal service money order only, no Paypal.

WANTED: Moki 250 Radial
Wanted: NIB Moki 250 Radial engine for a new 1/4 scale project.

Fiela 5 blade props and truturn spinners
Listing for a friend, everything purchased new. 1. Fiela 20x16 5 blade wood prop with Truturn custom cut 4~| spinner, $400. 2. Fiela 22x14 5 blade wood prop with Truturn custom cut 4~| spinner l

Don Smith B-29 Superfortress
Frank has asked me to help him sell his two biggest and best RC projects If you don't know him, it's hard to describe how much skill and time and love go into these birds This is the larger of t

Cap 232
Cap 232 with DLE 30. Hitec 925mg servos. Servo on choke. Has 7 channel spectrum reciever, brand new life battery on the reciever and new battery on ignition. Just bind and fly. Local pick up. Thanks

Likes Line Retracts AT-6
1 Set of Likes Line AT6 Retracts will fit Zirolli AT6 or Similar Models

Don Smith A-26 Invader
Frank is selling the two biggest and best of his RC beauties: #1) ~|Dream Girl~| Enlarged to 120~| from Don Smith plans Powered by throaty twin cylinder Saito 300's ~|Best 4-Stroke~| at

Goldberg Cub Wing
I have a used in good condition wing for the Carl Goldberg Anniversary Piper Cub. Local pickup only...

Super Floats
Carl Goldberg Superfloats 36" for the Piper Cub or similar. Partially assembled.

Goldberg Anniversary Cub - 40
Goldberg Anniversary Edition Piper Cub with floats and Saito FA-80 4-stroke engine. Also included Futaba standard servos. Just add receiver and fly!

Extreme Flight Extra 300
Extreme flight Extra300 50cc extra with da 50r stock da muffler servos are jr8711hv on rudder hitec 7954 on wings and elevator hitec7955 on throtle new pulse 3600 receiver battery new wheel p

Futaba FSU2 FailSafe units
I have two (2) Futaba FSU2 failsafe units. They are both as new and will be sold together. For the two (2) $25.00 shipped Con.U.S.

Quickdraw engine QD26HT
As New Quickdraw 26HT Less than a half a gallon of gas has been run through her. I am the original owner. Only test ran one time. I have many pictures on request, thanks for looking.

Hangar 9 P-51 60 size Marie (Not PTS)
Hanger 9 Mustang Selling hanger 9 60-size Mustang (Wingspan: 65.5 in and overall Length: 55.75 in). Plane was last flown on July 3rd and is in good shape and has never been crashed but does have

Traxxas XMAXX 6S RTR
I have a Traxxas XMAXX that I don't use much that is in good shape besides the rear of the body (common on Traxxas bodies) a small piece upfront on bumper that is broke and a spot missing out of a tir

Kingtech K100
Nice strong motor, reliable and low hours, if you interested I will provide more information. I can take any form of payment including credit cards, there will be a 3% charge for credit cards or pa

Jet legend yak 130 1/4 scale twin turbine
This is the jet legend yak 130, its set up for twin turbines. I bought this plane because I wanted something large and reliable and I was not dissapointed, with the amount of money that goes into

Saito FA-200Ti AAC In-Line
SAITO FA 200Ti inline twin Brand New. I took it out of the box to measure for mounting on my PT19. I bought this to mount on my Dynaflite PT19 but I'm selling this, the PT 19 and all my airplane R

Yellow Aircraft F-22 Raptor
I have a yellow aircraft f22 for sale, its in decent shape for its age, it lost a gear door in flight and I have not replaced it, the paint needs work, its not bad just not good. the plane fly's gr

bill Hempel 50% cub
Bill Hempel 50% cub in good shape, Has a 3w210 competition series has one tank of gas through it. Has all hitec 7955 servos through out. Eq10 smartfly board. feel free to ask any questions. I will not

GJC 1/9 Scale F-15 Jet
For Sale - newly assembled 1/9th Scale Global Jet Club (Jet Legend) F-15D Turbine Jet Priced to sell - negotiable... Specifications: - Wingspan: 55~|/1400mm - Length: 80~|/2050mm - Weight: 25

Ziroli F6F Hellcat Combo
Beautifully built balsa and ply Ziroli Hellcat 3 piece wing. Fuse is glassed, wing center section is glassed, fin is glassed. outer wing panels and control surfaces need finish sanding and glassing, s

Byron Muffler Mount for Quadra 50/52
I bought this Byron muffler/mount a long time ago and never used it. The inlet pipe is less than pristine but it will fit and work fine. These mounts are infinitely adjustable and are much better at s

Byron Muffler mount for Mustang 50
Good used Byron Muffler Mount for the Byron Mustang 50 engine. I flew this a lot in a Byron P-47 but no longer have it. It may also fit other engines. Great for an infinitely adjustable mount and sil

Byron New Muffler-mount for Zenoah G-62
This is a New G-62 muffler/mount that I bought years ago and do not need. It has been played with but never run. If you have never heard of these Byron mounts, they allow a large amount of adjustment

K&B "BOSS" 1/50 2-stroke RARE!
COLLECTORS:  ULTRA-RARE K&B "Boss" 1.50 cubic inch (24.6 cc) 2-stroke engine. This Prototype engine was run for test purposes only.  Only two were ever made before K&B w

Jersey Modeler 5-Gallon Gas Fuel Can
This is A Brand New Jersey Modeler 5.0SPEFR+C 5-Gallon 8-Cell 9.6Volt 4000mAh Fuel Can. I Bought It 6-Monthes Ago And Do Not Need It. I Charged It When I Received It. I Will Pay The Shipping.

Jersey Modeler 5-Gallon Kerosene Can
This Is A Brand New Never Used Jersey Modeler 5.0HKF-ESC+12V/4000mAh NiMH Fuel Can. I Bought This 6-Monthes Ago And Do Not Need. I Charged It When I Received It. It Is Equipped With The Speed Control.

RC 150A High Precision Watt Meter +Power Analyzer w/Backlight
Specifications: Operates voltage: 4.8V-60V OV with optional auxiliary battery Measures: 0-150A, resolution 0.01A; 0-60V, resolution 0.01v; 0-6554W, resolution 0.1w; 0-65Ah,resolution 0.001An;

thunder tiger Rare Bear
looking for an ARF by thunder tiger, the name is Rare Bear gold and white about 120 size. thanks MD

Potenza C80 Chargers
I have 2 extra Flex Innovations Potenza C80 Chargers. I am presently using my first 2 to charge all of my lipos and they have been bullet proof and the other 2 have been sitting for the last 4 months

Moki / Mark G 140 Gasoline Engine
Hi and Thank You very much for stopping by to view my ad! This is a brand *New* (never mounted / never seen fuel except perhaps for factory testing) Moki/Mark G140 Gasoline powered engine. Moki/Mar

Blade 350 QX BNF
I have an awesome Blade 350 QX BNF for sale. I've got about 25 flights on it, and I've never had any problems or crashes whatsoever. It is in perfect, like new condition. Will come to you in original

JR 8231 Ultra Precision
I have 2 of these JR DS8231 servos left for sale. 1 is NIB, and the other one is like new, it was used for 3 flights. Both come in original boxes with all original hardware. Price is $55 each plu

Mikado "Silverline"
I have a Mikado ~| Silverline~| Flybarless gyro system for sale which came out of a Goblin 770 helicopter.

Electric Motor /ESC combo
I have a Brand new Hobby King ~| Roto Max~| 1.60 electric motor and a Turnigy ~|Sentilon~| 100A HV ESC. I was going to put this on a giant U Can Do but changed my project so I don't have a use for i

Lauterbach 26 cc gas Thunderboat
Blazer kit built Lauterbach 26 cc gas Thunderboat. Buyer pays shipping costs and obtains freight estimates. Hull is appx 52~|x26~|x8~|. Price is firm. 2 pc. Cowlings held with dowels and magnets.

Hitec Aurora 9
2 receivers, charger, case and spare battery included. Jim 407 421 4433 Case dimension 17x13x7 inches. (for shipping cost estimates)

Saito FA-72 GK
Saito 72 GK and Saito 72. Both have a gallon or so thru them and both have very Good compression. 72GK- 150 shipped 72- 125 shipped

Spectrum DX8G2 Like New PLUS AR8000 receiver BUNDLE
Selling a next to new DX8G2 Transmitter that includes the AR8000 Receiver that are both in perfect condition with very little use. Included with purchase is The DX8G2, AR8000 8 channel receiver, and e

Top Flite P-47 Thunderbolt - 61
Top Flite P47 arf with Low time Saito 125. All hitec servos EXCEPT the retract servo, no servo for that. Retracts have not been installed. Canopy and interior has not been installed. 500.00 LOCAL

Saito FA-91 NIB Free Shipping
SAITO FA-91  HIGH POWERED HIGH CAM Series   NIB Brand New, Un-mounted, Never Seen Fuel, with Awesome  Compression. Includes the muffler, tools, and instructions.

TJ100HP PNP EDF (neu motor, CC esc plug and play)
Up for sale is an almost new TJ100HP(high power version with 7-stator housing, Neu motor and CC ESC in the tailcore) PNP setup for 10-11s 300 shipped In US. Paypal only

Saito FA-91S
New in box saito 91. Does have the instruction but DOES NOT have the tools. 250.00 shipped.

O.S. Engines O.S. .75 AX
OS 75 AX. With stock and ultra thrust pipe. Been sitting for a while, would put new bearings in it. 125.00 shipped.

Top Flite P-51D Mustang - 1/5 ARF
Top Flite ARF P-51D Jersey Jerk $2000 EME60 JTEC exhaust Serria Giant Air Retracts Hitec Servos 5645mg and 625mg on tail WILL NOT SHIP! LOCAL PICKUP ONLY! Price is firm at $2000

Losi SCT T nitro AWD truck short course
Losi sct nitro bought as back up truck not used enough to justify keeping in excellent condition. Truck is equiped with on board elec start. Could be converted to elec sct platform. Low run time

Futaba R6008HS Receiver
This is the Futaba R6008HS 2.4GHz FASST 8-Channel Receiver. This receiver is switchable between regular and HS modes, per the Link/Mode button. **NOT compatible with the Futaba 6EX and 7C 2.4GHz Sy

Composite-ARF Yak-55SP 2.6m
This AD is for the landing gear only. Not the airplane

3W 3W 100
I bought this engine used a few years ago and have use it for two seasons. Very reliable with lots of power. Hasn't been used for a season as I am not flying anymore. I accept paypal, buyer pays Pay

Sig Rascal 110 with DLE 30cc
upi for sale is my 110inch, DLE 30cc powered Sig rascal 110, it come complete and ready to fly with all digital high torque solar servos, dual on/off switch, opto kill and fuel tank installed.2 piece

Traxxas 2 cell Lipo 25c 7.4v 7600MAH
6408 mountain lake ct

JR 531 Premium Sport and 517 servos
JR Servos New. With 4 sets of accessories 3 JR 531 Servo 2 JR 517 Servo Paypal, Postal MO or Pers check (ship after it clears) Thanks, Lee

Ultrafly H/12/09 EP Motor
Here is a new Ultrafly H/12/09 900kv motor (25 size) for airplanes around 3 lbs. This motor requires a 50 amp ESC, a 3 to 4 cells lipo battery and a 12x6E to 13.5E propeller. Great for aerobatic or 3D

Hyperion Sukhoi SU-31 Green Cowl
Here is a new cowling for the .25 size Sukhoi SU-31 ARF. This the original Hyperion replacement cowl. Contact me fo more info. Thanks Kurt.

Seagull Christen Eagle - EP Cowl and Canopy
Here is a new cowling and canopy hatch for the EP Christen Eagle ARF. This the original Seagull Models replacement cowl and canopy. Contact me fo more info. Thanks Kurt.

Top Flite Radial Warbird Cowl
Here is an engine cowling for a TF .60 size warbirds (Corsair, Zero, FW-190, and AT-6). The length of the cowl to the mounting holes is 4.5 inches and the inside diameter is 7.25 inches. The cowl has

Sapac T45 Red Arrow EDF
Here is a nice fiberglass and wood built up EDF ARF. This requires a 70 mm EDF unit and flying weight is 42 to 46 ounces. This has a 37 inch wingspan with ailerons and flaps. This would make a great f

Ziroli F8F Bearcat
Here is a nice Bearcat kit designed by Nick Ziroli. This is the smaller version Bearcat with a 52 inch wingspan and requires a .40 to .60 glow engine for power. The kit is complete with all of the qua

H9 Carbon Cub
H9 Carbon Cub is in excellent shape. It has only three flights on it. The plane includes RCGF 20cc rear exhaust with pitts muffler, master airscrew prop, tru-turn spinner, 6' dubro tundra tires, stand

Hanger 9 > Carbon Cub 15 cc
Hanger 9 Carbon Cub, Hacker 50 Motor > Phoenix Edge 75 ,16X12 Electric prop , runs on 6 cell Lipo , RD Metal gear digital servos (4 ) 2 Hitec on Flaps, only 6 flights to date . Just add your RX and

Sist FW-190 A8
ONE OF A KIND - Sist FW-190 A8 - RTF (less receiver) with a G-62 up front. Sliding canopy and drop-able center line tank with both 2 and 3 blade spinners. Custom retracts, scale. Built by a Master

Scale CNC Trike Landing Gear Set for sale
This is a new CNC Trike Landing Gear set 25 lbs or larger aircraft 2 Mains / 1-Steerable Nose with quality New Electric Retract included Mains struts measures 5~| with 5.0mm Wheel Axle and 1/2~|

SV 26cc Gasser!!!
SV 26cc Gasser!!! Up for sale is an SV 26cc Gasser!!! Rear carb and side exhaust. Turns really smooth with great compression. Walbro Carb with Choke, run a 16X8~|, 17X6~| prop.

Moki 2.10
Up for sale is a new Moki 210RC with a B.C.M. Pitts muffler. Moki 210 RC specifications displacement ccm/cu in 22,6/1,38 bore mm/in 36,0/1,42 stroke mm/in 34,0/1,34 practical RPM 10, 000 ma

Zenoah G-20EI Gas engine
Zenoah G-20EI like new This Zenoah engine is in excellent shape, very low time.

Boomerang Jets Boomerang Sprint
im 45 miles from jets over ky and can deliver to buyer there.. i had this listed and sold with a bit different rx setup but the turbine refused to start so i pulled it sent to jetcat and came back

Saito FA-65
Saito FA-65 Bearings are smooth good compression had on 40 size P-51 ran great with 12-6 Can e-mail photos of motor

Balsa USA Sopwith Pup 1/3 - 2.7
BALSA USA 1/3 Sopwith Pup, has functional landing gear,covered in Solartex, has some patch repairs in the covering but is in good condition has 1/4 scale servos on the elevator,rudder and ailerons,pow

Top Flite P-51D Mustang - 1/5 ARC
NIB ARC kit, Originally bought intended to do a B conversion,, Only work done is I was using the wing to modify a set of retracts for servo operation, see detail of that here http://www.rcuniverse.

top flite focke wulf 190 d9
Top flite focke wulf 190 d9 kit new in the box. Asking 140.00 o.b.o

DLE 20 PITTS MUFFLER
NEW! Pitts Muffler for DLE20 20cc Gas Engine May fit other engines with 32mm center to center Mounting holes. Please check attached dimensions. Comes with mounting bolts and gasket $42.99 p

Pitts Muffler DLE-55/DA-50/DLA56 PLUS SALE
Brand New Pitts Muffler Fits, DLE50 / DLE55 / DA50 / DLA56 / GP50R, JVO 52 plus others! 50cc size mounting holes are 40mm center to center For instructions on how to add a Muffler Bracket,

Metal Dual Power Switch with Fuel Dot SALE
Heavy Duty Metal Dual Power Switch with Fuel Dot Two Switches: one for the receiver, another one for the CDI. Two plugs compatible with JR and FUTABA: One fuel dot with fuel filler can

6in Twisted 22g JR Servo Extensions x 20
I have 2 piles of 20 servo extensions . This is 22g wire 6in Long $40 shipped for 20

2mm Gold Bullet Connectors x 20
I have a bunch of these These are 2mm gold bullet connectors $10.61 shipped for 20

Micro Mini Hand Drill with Chuck and 20pcs 0.3-1.6mm Straight Shank Twist Drill Bits
Have a few Material: Steel Color: Silver Drills Length: Approx. 2.1-4.3cm/0.82~|-1.69~| Drills Size: 0.3mm, 0.35mm, 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm, 0.65mm, 0.7mm, 0.75mm, 0.8mm, 0.85mm,

100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel
The cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Great for contractors and the home hobbyist. Fits Dremel Craftsman Chica

T-Plugs x 10 pairs
You get 10 pairs of T-Plugs

Bullet Connectors 4.0mm x 20 pairs
I have 100 pairs of 4.0mm bullet connectors $12.67 Shipped for 20 pairs

3M Blenderm Tape
1in wide X 5 Yards and 2in wide x 5 Yards You get two 1in for $5.50 or you can get One roll of 2in for $5.50

Deans Parallel Charging Board Supports 5 Packs of 2-6S Lipo
I have a few of these . I Have for T-plugs Balance Output Cable: 18AWG silicon cable Current: Support MAX. 20A charge current Support 5 packs 2S, 5 packs 3S, 5 packs 4S, 5 packs 5S, 5 packs 6S b

Hangar 9 CAP 232 80in - 2.0
Used but very solid and dependble Wing bag like new and is an extra $50 Tank and fill valve included No engine or electronics included at this price but can finish it ready to fly if you prefer and

Sebart Mythos 125e Yellow/Black
Sebart Mythos 125e Yellow/Black  Hacker A60-7XS V2  (8S setup) Castle Creations Phoenix Edge 100 ED-Nano A123 RX battery 2S1P 6.6V/1100mAh Electrodynamics Ultra Switch Nano 4 - Power Unlimite

Balsa USA WW1 1/4 Fokker D VII etc
Hello. I am in the market for a professionally built 1/4 or 1/3 scale WW1 biplane (or a Fokker D8). Preferably within 500 miles of Milwaukee Wi. Please provide current detailed photos. Thank you R

RC Airplane Gambler 40 Kit
Kit is new in box, please message for any additional information. Thank you for looking. Price to sell $49.97 plus shipping If you have any questions please call 617-538-7755, Matt Email dc

Nuova Faor SF501 Nitro Bike ARR
Nuova faor SF-501 with carbon fiber Fram and upgraded servos to Savox 1258 titanium gear servos. Nuova does a pretty great job keeping everything top notch so thats all that was upgraded for the most

Boomerang Jets Boomerang Sprint
I have a sprint that was made up from two crashed sprint. This airframe is 100% structurally sound, I have been working on it a little and went through the entire jet. I rebuild the belly on this jet

Losi DBXL 30cc
I have a DBXL with a aftermarket 30cc engine, exhaust pipe, full skid plates, proline trencher tires, DGI turnbuckles front and rear but rear haven't been installed yet, K&N airfliter not installed, a

BBI 1/6 GEORGE BUSH PILOT
I have NIB BBI George Bush pilot figure 1/6 scale, extremely detailed pilots. For any questions call or text 617-538-7755 Matt Price to sell $70

Hangar 9 Cap 232 1/3 Scale - 3.0
Hanger 9 33% Cap 232 This plane has only been flown a few times. Fly's really great with plenty of power from the Zenoah GT 80 Twin engine. Everything was purchased new for this plane. Engine runs g

Kingtech K-45 New In Box
Kingtech K-45 G1. Bought it new last year and never used it (zero time on the ECU). Comes complete as if you bought it from KingTech direct. I have not registered it yet so you could register it a

Tamiya TLT Axle Set and Parts
Tamiya TLT Axle Set and Part Sold as is

New Custom Build Tamiya 1/10 Unimog
New Tamiya CC01 1/10 Shaft Driven...CC01 Chassis Custom Built Stryene Flat Deck Light Bar...(leds need to be installed) Tool Set...Jack All...Jerry Can...Spare Tire Stock Motor Length: 16.8~| (

Twisted Hobbys 32" Crack Yak RTF
I'm getting out of the hobby, and selling everything I have. This Crack Yak has a Sunny Sky X2204-21, 1800KV motor on it, and Hitec servos. It has an orange rx from HobbyKing, and I don't remember

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. Much lighter and eaiser to manage th

Goldberg Extra 300 - 60
Have a new in box Goldberg Extra 300 kit for sale. This is a full build kit, not an arf. If you know anyone who has/had one of these planes they will tell you how good they fly. This kit has not be

2 Forza 450 with 3 blade heads
I am JR dealer, these have been sitting in my office for over a year. the green one has been test hovered and the Orange one has been flown a few times. I am a scale guy so these have not seen any ha

Blade 130X Red Bull BO-105
I bought this a few years ago, only flown 3 times, is BNF mint condition. open to offers. MAKE OFFER.....

Rebel Pro
Rebel Pro RTF. KingTech 210, all JR, Spectrum 12ch powersafe, IGYRO, Jet Central smoke pump, custom paint, custom wing and tail covers. Will be at Kentucky Jets. Vernon Montgomery 601-955-3826. $12,00

PROLINE DIRT DAWGS/ CHROME RIMS
I HAVE A PAIR OF PROLINE DIRT DAWGS ON CHROME RIMS. THE HAVE SOME MARKS ON RIMES BUT ARE VERY USABLE. THEY RE USED. CALL OR TEXT ALAN AT 843-834-2639 IF ANY QUESTIONS, BUYER PAYS SHIPPING SO IL NEED Y

HPI Racing RS4MT
I HAVE THE RS4MT, LOTS OF ALUMINUM HOP UPS AND EXTRA SET OF WHEELS AND A COUPLE OF OTHER THINGS. COMES WITH ALL YOU NEED EXCEPT AA BATTERIES AND FUEL. CUSTOM PAINTED BODY. WANT TO TRADE FOR CRAWLER OR

Traxxas S-Maxx 3.3
We have a original sport maxx, with a 3.3. it has reverse and 4x4. wide a arms. upgraded well at the time to a brand new jr XR3I controller Well when it was new. ). and HPI terra gripper tires with HP

Wild Hare 40% Giles 202
This plane is in like new condition, it has been flown only a few times. The engine is not even broke in yet. Everything was purchased new for the plane and professionally set up. Awesome smoke system

Custom R/C Airplane Building Service
Build that plane of your dreams, any size you desire. Just find plans with templates of ribs and fuselage formers. Dennis, the plansplotter.com can scale PDF files to any size. Paper plans can b

FS,FT,Axial yeti RTR.
FS,FT,Axial YETI with all new parts rtr looking to trade for a axial scx10 .If I sell it iam asking $325.00 SHIPPED you can email me at rcmannitro@yahoo.com.

BYRON MUSTANG 50CC
I have a Byron original MUSTANG 50 with low run time. Comes with new purr-power muffler and accessories. I can not find the two muffler screws but I am sure they are easy to find. I was going to use

WANTED - Documentation for a Giant Scale Planes Sukhoi SU-31 - 80
Does anyone have paperwork / instructions for a GiantScalePlanes Sukhoi SU-31 – 80? I have had the plane for a while but I cannot locate ANY paperwork. If you have any paperwork and are willing to

Mint Futaba 14SG 250.00 shipped
Mint Futaba 14SG 250.00 shipped Never have taken the plastic screen cover off it was never flown.Had it about a year. bought from tower. it has latest firmware. I do not have the box I guess I th

Like New -- K&B .40
Vintage K & B .40 RC Engine NEW Condition - Vintage K & B 40 Model Engine. Purchased in approximately 1976 and has been lubed and stored. (never got around to installing it.) This Engine has

Tekno 410 roller
34 cooper lane

1/5 Scale ME109 Spun Aluminum Spinners
!/5th scale ME109E spun aluminum spinners. New. 4.75~| DIAMETER

Sig Citabria bashed into a American Champion Scout
Sig Citabria kit bashed into a Scout, wing extended and Rudder/Fin slightly modified. Setup as electric, but firewall spaced so a fuel engine can be used also. It's very close to be finished, need to

Dave Platt 109 Spinner
Dave Platt BF109G spinner with extra spinner cone. Brand new

THE Starduster Two Biplane
This is a plane for an experienced builder to finish only Starduster Two --from RCU plans Dec 1990 Designed by Martin Fallandy Built by a kit builder and expert pilot doing this for 25 years

ASP FSR 75 Glo fuel
Engine is perfect and new in every possible way Powerful user friendly and very durable engine as i have worn out two with about 300 15 minute flights on each Awesome engine for any 60 Stik airfr

P3 Revolution
I bought this plane and added a CF - landing gear and CF - spinner , it also comes with a brand new lower set of wings, it also comes with a Evolution 62 GX gas engine but does not have servos or rad

Robart/Ziroli G.S. Stuka struts
Giant scale struts for a Ziroli Stuka. I had planned on using them in G.S. Macchi 202 as retract struts. doing a new project. Robart price; $201.00 Asking $150.00

Giant Scale Propellers
6 Giant scale wooden propellers. Sizes 22 x 8, 22 x 10, 20 x 14. Five are brand new, one was used to bench run an engine. Brands are Zinger and Top Flite. $60.00 FOR ALL OF THEM/

JR XP8103 DSM2 or PCM/FM
JR8103 8 Channel Transmitter. EXCELLENT CONDITION. Converted to 2.4 DSM2 with a Spektrum module. Also set up with LiFe battery pack for great flying time. Included is the original 72 Mhz module and

Hanger 9 SR22T (ARF)
Up for sale is my new Hangar 9 Cirrus SR22T 30cc. Currently it has been flown only 6 time. It has a new DLE 35RA swinging a Beila 17X10 3 blade prop. Two JR DS368BB Premium Digital Micro servos on t

Seagull AT-6 Texan With Retracts FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 I now have a PayPal acct:Sherwood@Sherwoodsguns.com..... FREE SHIPPING Seagull AT6 Texan ARF with Retracts! •

compressor wheel RAM1000 ;750plus combustor & fuel manifold
compressor wheel for RAM 1000 & 750 plus brand new. combustion unit new fuel manifold new . surplus compressor $ 76 each combustor chamber $ 100 each fuel manifold $ 65 each free shippin

Enya 11CX FREE SHIPPING
This engine was bench run some years back. Has an undrilled engine mount. .......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

Saito FG-20 Gas w/ignition FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

Zenoah G-26 Air FREE SHIPPING
Zenoah G26 I believe.........I bought it used, never used it..........Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

Zenoah G-26 EI FREE SHIPPING
Zenoah G26 EI, I believe.........I bought it used, never used it..........Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

O.S. Engines O.S. .55 AX FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

O.S. Engines O.S. 1.20 AX FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING ...................

O.S. Engines O.S. 1.20 AX FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING ...................

O.S. Engines O.S. 1.20 AX FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING ...................

Mark M 180 RC FREE SHIPPING
New in box Mark 180RC, ( Replaced the MOKI engines ). I have used a number of these and have always found them powerfull and problem free............ Call or TEXT Sherwood........ 270-784-7771 or em

BH Models T-28 Trojan 61
Brand New in Box Will not ship! No Trades

Top Flite AT-6 Texan
New in Box No Trades No Shipping!

Seagull Yak 54
New in Box No Trades No Shipping!

Top Flite P-51D Mustang - 60 ARF
New in Box No Trades No Shipping

Thunder Tiger Lazy Tiger P-51
I'm getting back into the hobby and I'm looking to buy a Thunder Tiger Lazy Tiger 51. PM me if you have one you'd like sell.

Raco Jac Rabbit 1/4 scale
please check out my auction on ebay. Look at this on eBay http://www.ebay.com/itm/172767574486 also have a bumper thats not showing and a video link in auction to here it running I made over the

Balsa USA Fokker DR1/3 Scale
Selling my 1/3 Scale Balsa USA DR1 TRIPLANE The Plane is loaded with detail From the Cockpit to all the Rib stitching on all wings Finished in latex paint Has Spandau machine guns Le Rhone dum

Ken Block Car
I have a ken block car for sale, with the velenium esc and motor, this car is almost ready to run all it needs a batteries. comes with traxxas transmitter, all wheel drive. asking 140 shipped to you

WW1 Bristol Scout D
Designed and built by myself from my own kit, some kits left for 245.00. 100~| wingspan, G-62 power, 27 lbs, 21st Century covering. Complete with all Hi Tec heavy duty servos, extensions, switches an

WW11 Stearman PT17
This my highly modified World Models Stearman. Paint scheme has been changed, lots of surface detail added, radial cowl, wheel pants, complete full length cockpit front and rear with lots of detail. S

Waco YKS-6
. Waco YKS-6 has been refurbished with Solartex covering on fuse, silver monokote on wings, trimed with spa blue enamel spray with red pin stripe. G62 is basically new, all new High Tec 645mg servos

1/4 Scale Fly Baby and others
For Sale short Kits: EAA Bipe-80~|-$189.99 EAA Bipe-88~|-$199.99 L4/NE1/J3 Cub-129~|-$279.99 Flybaby-84~|-$189.99 WW1 Bristol Scout-97~|-$249.99 Miss Los Angeles-72~|-$209.99 Miss Los Angeles-

1/3rd Scale WILGA
1/3rd Scale Wilga by Tomahawk Designs out of Germany. 154~| wingspan 53lbs All composite Base coat/clear coat Detailed cockpit JR8711 on all flying surfaces Tow hook Smart Fly System Futaba 14 channel

Extra 260 27%
Extra 260 27% ready for motor/radio. Includes seven Futaba S9201 servos. Cowl paint peeling from hanger rash, fiberglass fine. Otherwise plane/covering/condition in good shape.

Allure (new)
This is a new Allure fuselage custom painted from a white builders kit. It is mated with CK Aero factory wings and stabs. I built and painted this Allure with the intent to sell. It has only been t

Sig Piper J-3 Cub (1/4) REDUCED last time
only 10 to 12 flights on it comes with ;   coverd in sig koveral and dope , rib stitched , scale ailerons , os 160 twin , sullivan onboard glow , wallace gear , fiberglass cowl , seats in cockpi

Herr Stearman PT-17 big 28" w/s KIT. Suitable for E-Con. Mint cond.
NIB.... Mint cond. 28~| Wingspan!! 44.00. Shipping is free Laser-Cut Hand-Selected SIG Balsa Wood 3-D CAD Engineered For A Precise Parts Fit Accurate Computer Drawn Full-Size Plans Step-

Top Flite kit RC-1, ORION....KIT
This is the Vintage Top Flite ~|ORION~| kit RC-1,....NIB and more than rare but described as used because it has been opened. Also a collectible kit. There is no zip code on the box so

EMMA C. BERRY.. Sailing Schooner.. Sterling Models R/C
$335.00 USD Seller Pays Shipping For Sale EMMA C. BERRY.. Sailing Schooner.. Sterling Models R/C The Vintage and rare EMMA C BERRY ..... Classic R/C Sailing Schooner. Wooden

Thunder Tiger Christen Eagle Profile - EP
Thunder tiger Christen Eagle 30~| wingspan with 09 motor has servos and speed controller even has a Futaba receiver channel 28 just add lipo and fly. Will throw in a 1500 MAH 10C Lipo with connecto

Tamiya Stadium Blitzer
Ready to run, body is in good runner condition and was painted with the wrong type of paint so it is easy to strip and repaint.  Battery hold down is missing, rear shock tower shock mount was cra

Exceed-rc nitro Forza
New in box exceed-rc nitro 1/10 scale 2.4Ghz Forza rtr.  Includes complete car, radio, instructions and decals.  I got this with a few other cars I bought as a package deal. $140

Fly Sky FS-CT6B
2.4G CT6B 6-Channel Transmitter+Receiver (R6B) (Complete Radio System for RC Helicopter+Airplane) Review: ~|Awesome radio, just as good if not better than any 6 ch system out there. Having to plug in

O.S. Engines O.S. FT-160 Twin
For Sale is an OS Gemini 160 twin nitro engine. New in box with manuals and tool set. It has never seen fuel Sells for $1149 from Tower Hobbies. Thanks for looking

Malibu .40 Trainer


jett engine
DUBB JETT ENGINE 60LX. NEW NEVER USED, ONLY MOUNTED FOR DISPLAY BUT NEVER TURNED ON. PRISTINE CONDITION, MINOR SCRATCHES AS SHOWN IN PHOTO. VERY POWERFUL ENGINE: 15000 RPMs WITH A 11x6 PROPELLER. LIGH

Freewing yak 130 70mm jet
Freewing yak 130 70 mm jet with radio and battery comes with radio 6s 4000 60c admiral battery two resvers radio is a seven Chantal futaba fast radio & 350.00 shipping included call 917 710 4467

3.1m Sukhoi SU-26MM
Selling a Hangar 9 3.1m Sukhoi that is currently ready to fly. Simply said, awesome flying airplane, but with a lack of available time, the model isn't seeing any flight time. In total, I have log

Bill Hempel 150cc Yak 55M
Selling a 118~| Bill Hempel Yak 55M. Airplane has roughly 75 flights and has been flown over the course of two seasons. The model is equipped with the following: •Desert Aircraft 170cc engine •Hea

Yellow F-15
Yellow F-15, kit built, speedbrake, full gear doors, full cockpit. Tams failsafe on gear, jettronics valve on brakes. All jr servos, mostly 8411. Built well, everything works perfectp, flys great, pai

AeroWorks 120cc Yak 55M
Selling an Aeroworks 100cc Yak 55M with very little flight time and in absolutely perfect condition. The airplane was assembled last year and flown about 30 times. The model was equipped with JR 8911

Saito FA-300T-TPD
For sale is a New in the Box Saito FA-300T-TDP. This is the way I bought it and it comes with everything in the pictures. I think everything is there from the factory except the packing material whic

3DHS Extra 330LT 108"
3DHS Extra 330LT in red white blue. This is 108 inch version. No shipping. Local pickup. I mounted my electric motor, landing gear and tailwheel, otherwise the kit is new. Price is for the airfr

Protek High Voltage Servo 130T
These are two brand new unopened Protek 130T High Voltage servos for sale. The operating voltage is 4.8v to 7.4v with a maximum of 8.4v. These are dual ball bearing servos with metal gears. They ha

T-REX 700E V2
Like new bind N fly. Consider trade for planes or nice quad. $700

Futaba 10CG
Futaba T10CAG Transmitter with memory card and two receivers. This includes standard Futaba battery and Lipo conversion battery. The Lipo is a 2650 MAH. The receivers are R617FS, standard Futaba char

Habu 32 and Grey Habu


Slimline Pitts Muffler for DA 85 - New in Pkg.
Slimline Pitts Muffler for DA 85 - brand new in Pkg.  Never opened $175 shipped

NX Competition Propeller (AirWild) 27 x 10
Air Wild NX Competition Propeller 27 x 10 Brand new in package.




 
RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2017.
Terms of Service | Privacy Policy
 
GET FREE RC CONTENT FOR YOUR WEBSITE

Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

Products Videos WattFlyer.com RC Classifieds

RCU2 | 54.156.78.4 | 0 | 1 | 02:14:22 PM EST | NC