RCUniverse Classified Ad Market Archive

Showing Listings No. 1501-1800 of 20000

   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67 
 
Carl Goldberg Superfloats
For sale is a Superfloats kit by Carl Goldberg. They are 36" long. Kit is complete and in excellent condition.

Spectrum AR9100 receiver
I took this out of a jet I bought. I fly Jeti so don't need this receiver. Comes with 4 sat, power switch. Has deans plugs. FREE SHIPPING!!

Ziroli P-51 Mustang
Made from Ziroli Plans and finished in Tuskegee colors. This plan flies as it should, with grace and power. Completed with Solartex aluminum/silver fabric for a realistic look. Detailed cockpit and an

Brison 2.4 with extra gasket kit and bowman ring
Brison 2.4 in excellent shape. Comes with pitts wrap around muffler, uninstalled Bowman ring and extra gasket set.

Traxxas E-Maxx 16.8V
Traxxas Emaxx, RTR, excellent condition. Comes with two 3500mah Lipo batteries and a Lipo wall charger. Asking $250 OBO. I deal with money orders only and I pay for shipping. Check my ratings and

Thunder Tiger Raptor 30 V2
I have a raptor 30 v2 this is a really nice flying heli am just moving on it served me well and it will do the same for you! there is not that much time on this heli this is a very nice way to learn h

try pacer
I have a bran new never flown try-pacer made be e-flight this is a nice plane!!! everything was new to this build top of the line stuff know cheap stuff in this plane! 200.00 cash and I will give you

Moki 1.35
hi what I have here is a really nice moki its new its only been run one time and that's it and man it will scream!!!...

Moki 2.10
hi what I have here is a bran new moki 210 the engine was only ran once and that's it so yea the motor is new! this engine has got some killer power! you cant beat a moki!!...

Moki 1.80
hi what I have here is a really nice moki 180 this is a new engine o only ran it once and that's it so yea its new! this engine runs like a raped ape!!!...

31cc ryobi
hi what I have here is a good running 31cc Ryobi runs great just cleaning out the shop a bit that's why am selling it.

annco gear
hi what I have here are some annco gear. thay will fit a bud nosen p-51 and 47. with a 100inch wingspan thanks lenny!!

JetCat P-120 SE
This is the Jetcat P120 SE in an excellent condition.Has a very few hours on it. Comes with ECU ,fuel pump,electrovalves,Gsu. Very good ,clean engine and very powerfull!!! Plus ,one extra install

Sig Rascal 40
Rasca 40 Tail assembly horizontal and Vertical in good condition

Goldberg Electra kit
Have for sale one KIT Carl Goldberg Electra electric sport sail plane kit, comes with power package, formed cowling and canopy requires a 2ch radio and a 6cell 7.2volt battery pack either 1200mah or 1

Jet cockpit Kit
Long time out of production! Generic cockpit! My intentions were to back pour these for resale? I have so many projects! I thought someone would like this for an individual project, or splash? This ki

1/4 Scale Scotts 2000 Tail Wheel
Manufactured by Cirrus Ventures! Very scale looking Scotts tail wheel assembly for J3,J4,vagabond,Aeronce, and other rag wing vintage aircraft....

Great Planes Giant Scale Christen Eagle II ARF - 29%
Looking for a Great Planes Giant Scale Christen Eagle II ARF (GPMA1217) Prefer New-In-Box, but will consider all. I know there's one out there. Thanks!

Spektrem DX 6 Gen 2
I have in excellent condition transmitter. Comes with a new Turnigy lipo I just bought last week. No manual . Also comes with a brand new Lemon DSM2 6ch receiver. $150 shipped

Craft Tools Set For Car Model Building
This modeler basic tools set is suitable for a begin and advanced modeler as well. The quality of this set is up to standard, that's enough for a Gundam modeler to finish a Gundam Model Kit, even to

6pcs HSS Grinding Head Set Routing Router Grinding Bits Burr For Rotary Tool
Material: High Speed Steel Colour: Silver Length, approx. 39mm / 1.53~| Shank diameter: 3mm / 0.11~| Speed: Max 40,000rpm. Quantity: 6pcs Features: 1. High production efficiency, good qualit

6 Pcs HSS Circular Saw Blade Dremel Cutting Discs for Rotary tools
Can be used in Gem stones, Glass, Ceramics, Porcelain, Tiles, Carbide, Rocks, Aluminium and Copper. Included 6pcs cutting tools(1 x 22mm, 1 x 25mm, 1 x 32mm, 1 x 35mm, 1 x 44mm, 1 x 50mm) + 1 pcs man

25Pcs Resin Cutting Wheel Disc + Mandrel Rotary Tool
Come with a 2mm mandrel for mounting in compatible hobby tools with the same sized chuck. Use with dremel rotary tools, for cutting metal/plastic/fiber/wood,etc. Specification : Material : Resi

1000 Piece Stainless Steel Screws
These quality screws are an extremely handy accessory to your tool kit. Size:1.6mm,1.8mm,2.0mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.0mm,5.5mm Thickness:1.2mm Quantity:1000PCS Material:Stainless Steel

Upgraded 1/10 yeti RTR
looking to maybe sell my yeti, just seeing what offers i can get yeti is an RTR model, stock radio/esc/3150kv brushless system mods are as follows aluminium servo saver, bellcrank with STRC alum

Spectrum receiver AR9000 DSM2
For sale One receiver Spectrum AR9000 DSM2 new it was used for the set up and one flight. All it was used for . The plane was sold . I don't fly anymore so I never use it. Horizon hobbies se

Drill Carving Locator with 4pcs 3mm Twist Drills and 6pcs Wood Milling Burrs for DremelRotary Tools
Specification: Material: steel, plastic Color: black,silver Grinding head diameter: 3.175 mm Locating cover size: 60x42cm Features: Position cover for fixing drill grinders, milling cutters,

4pcs Hex Screw Driver Tool Kit 1.5/2.0/2.5/3.0mm
Material:Chrome vanadium alloy steel Diameter of handle:1.5cm Total length: 17cm Length of handle: 7.5cm Feature: Everything you need to repair your favourite toys! Can be used for models of

OS 120 AX Multi Angle Muffler Adapter
You are viewing a new multi angle muffler adapter. I must say myself that this is one of the most novel inventions to come out of OS Max engines. It is cast and then fully machined. It will allow the

DJI Flame 550 Hexcopter
IF YOU ARE FLYING YOUR $1000 NIKON ON A QUAD COPTER AND YOU LOSE A MOTOR, NEW CAMERA! WITH THIS DJI FLAME, YOU CAN LOSE ONE MOTOR AND LAND SAFELY!!! You are looking at a DJI Flame 550 Hexcopter. Thi

"OK" CO2 Engine
This is a very difficult to find "OK" CO2 motor. It is complete. I have never run it but it is simple and looks ready to go. It is ideal for small aircraft. It is sold "as is". I d

Global Jet Club FB 1/4.75 Large BAE Hawk
Global Jet Club FB 1/4.75 Large BAE Hawk. I have six flights on this jet and it flew as advertised, very nice flying jet. I'm scaling down to one jet and decided to let this one go. This is whats

AeroWorks Extra 260 100cc - 35%
For sale or trade Aeroworks Extra 260 Excellent condition. Da 100 with pipes, power distribution system, Jr servos 8611 and 8711 wing bags extra props, storage/ transport box included. Asking $1800.0

Goldberg Super Chipmunk - 45
For Sale Goldberg Super Chipmunk 45 kit.  New in Box Includes glass cowl and wheel pants .  Will ship to Canada and the continental USA at buyers expense.  PayPal or International M.O,

2.4G 7CH F701 Receiver Supported JR DSM-X DSM2 Compatible
The F701 receiver is a great solution for all model aircraft requiring full range up to 7 channels. This receiver is more powerful than AR7000 Receiver, This dual path redundancy, plus the fact each

Stream Schneider Sport 60
Stream Schneider Sport 60 ....Deluxe Kit with Floats.   2 Stroke 45/60 OR 60/80 4 stroke Excellent Flying & Aerobatic Capabilities With Schneider Style Floats OR Landing Gear. Span 5

NIB GAUI NX7 Basic Kit
NIB GAUI NX7 Basic Kit

2.4G 5CH DSM2 Full Range Micro Receiver With 30mm Antenna
Item name : 2.4g 5CH DSM2 receiver Channel: 5 Channels Size: 9.5*10.5*2.5mm Working voltage: 3.3~4.2V (recommended 1S lipo) Length of antenna:30mm Weight: 0.28g Features: It is compatible

JR r1221x
jr r1221x recievers never been in the air only mounted in airframes for mock up I have 2 for sale

Ball Link Plier
100% brand new and high quality Length: 139mm Width: 54mm Jaw length: 42mm Jaw opening: 34mm Ball opening: 4.5mm Features: 1.High quality and exquisite workmanship. 2.Mini appearance, goo

O.S. Engines O.S. .15 CV-A
asking 125.00 shipped or best offer motor was used very little check out my other auctions

OS 25 sf
this is an os 25 this was mounted in a plane i do not remember flying it so it is being sold as used it looks like the piston has a scratch on it but i do not think i ever ran the motor asking 60.00 b

BQY Power 11.1V 2200mAh Lipo Battery For RC Transmitter
Capacity: 2200mAh Voltage: 11.1V Size : About 100mm x 30mm x 21mm Charger Time: about 1.5 hours (by input 1A) Weight: About 151g Plug: Futaba plug & JR plug Fit:Futaba KO Ridio transmitter and 7

AEROWORKS YAK 55
FOR SALE: AEROWORKS 50CC YAK 55. Thinning the herd and this one I feel will sell quickly. This plane includes the following DLE 55 (side exhaust) Savox digital servos on flying surfaces. Smart

Zenoah G-23 Gas
Zenoah 23 used good compression and bearings with after market muffler will ship to lower 48 states only

EG aircraft Corvus Racer 540 50cc
Corvus racer 540 50cc for sale This plane is in good condition, has flown about 35 times. Servos: Jr 8911 high voltage elevators Jr 8911 high voltage rudder Hitec 7954 high voltage aile

Balsa USA Sopwith Pup - 1/6
Balsa USA 1/6 scale kit new in box I will only ship to lower 48 states

Wizard Biplane
Wizard Biplane By Sterling Kit is complete plans are yellow with tape vary usable will ship to lower 48 states only.

IGNITION ENGINE POWERED OLD TIMER PLANES- FREE FLIGHT- VINTAGEMODEL AVIATION
Plane info. Playboy (?) white w/yellow wing: Wingspan 61 inch polyhedral Fuse length is 44 inches stabilizer width is 30 inches Orwick 60 green ignition w/coil,spark plug points. very good comp

K&B .61 R/C
looks and feels good no damage

50% Laser Kit by G&L Hobbies
I have a 50% Laser 200 Kit For Sale. The Kit is made by G&L Hobbies. The Fuse is ribbed and glued together with tail feathers installed. Wings are skinned. All control surfaces are made but not instal

Goldberg Tiger 60
Up for sale, a Carl Goldberg Tiger 60 airframe with 5 servo's. I've added nav lights for those late evening flights.. Fly's good. Add your receiver, engine and go fly.. LOCAL PICK UP ONLY.. NO SHIPPIN

Aircraft, Chargers, Batts, Props, Cases, + More: All Must GO!
Bay-area multirotor tech company SELLING (almost) EVERYTHING!!!*** LETS MAKE A DEAL ! ***. (list will be continually updated -if able-) *If you need something not listed, I probably have it. Just ask

Magnum XL-91RFS
Up for sale, a Magnum XL 91 four stroke engine. I am the second owner and not started the engine. I will ship in the box in the photo.. $100.00 FIRM plus actual shipping..

DJI 550 hexecopter
DJI 550, converted to a 650, JR 9303 remote control 2.4 GHz, DJI E 300 kit, Vector GPS flight controller by Eagle-tree ,dronepart Inc. CNC aluminum arms, bosscam 2000 mW video transmitter, tarot t

78" Carbon Z T-28
I bought this plane last fall and have flown it about a dozen times. I decided to repaint her so she doesn't look like everyone elses. The Achilles heel of these planes is the upper gear doors break

Picco P3 .28 turbo head button
I have a P3 Picco .28 pullstart engine with standard plug head. I'm looking for a turbo head button which I believe came on the Factory Team buggy engine.

Hangar 9 Funtana S 3D .60-.90 ARF GASSER 20 cc DLE NEW
Newly built Funtana 3D 20cc Gasser 8 flights 20cc DLE with servo actuated choke New Hitec servos HD control hardware New Sanyo 6v. 2700 mah flight pack from batteries america New Sanyo 4,8v. 270

2.4G 6CH S603 Receiver Supported JR Spektrum DSM-X DSM2 compatible
These are great receivers Description: Frequency: 2.4GHz Channel: 6CH Mode: DSM-X(Supported DSM2) Input Voltage: 3.5-9.6V Weight: 12g Size: 47*24*14mm The Advantage(better than AR6210): -

Aluminum Fuel Dots "ON SALE"
Made of high quality aluminum alloy, the fuel filler with fuel dot, tight seal. 5/8~| outside dia. Comes in Red-Blue Black. Anodized Aluminum. Please let me know what color you would like

DLE 20 PITTS MUFFLER
Pitts Muffler for DLE20 20cc Gas Engine May fit other engines with 32mm center to center Mounting holes. Please check attached dimensions. Comes with mounting bolts and gasket $39.99 plus ship

Servo Reversers
Servo Reversers, 5.0 Vt - 6.0 Vt. Universal Connectors. $5.99 + $3.49 shipping for 1 or more. No PayPal Fee! CHECK OUT MY OTHER LISTED ITEMS

DLE/DA/DLA Aluminum Precut Spinners Plus 3 bladed Alum spinners
NEW STYLE- NEW MANUFACTURER- TOP QUALITY New,   High Quality STAR CNC ALUMINUM SPINNERS Aluminum Alloy material. CNC and Anodized processed. Quick and easy installation: large prop

Pitts Muffler DLE-55/DA-50/DLA56 PLUS
Brand New Pitts Muffler Fits, DLE50 / DLE55 / DA50 / DLA56 / GP50R, JVO 52 plus others! 50cc size mounting holes are 40mm center to center For instructions on how to add a Muffler Bracket,

Albatross 54" wingspan
Like new Albatross Biplane 52' wingspan.  Has electric 32 size motor with speed control. Weighs 3lb. 4oz. without the battery.  Uses 3 or 4 cell Li-po battery. Easy magnetic top hat

O.S. Engines O.S. .40 LA Natural
good running engine very low time

YS Engines YS .63 FZ
this engine was run but never flown.

Irvine 1.50 Ring
new in box never run, no stock muffler, but has new bison pitts muffler in bag also has optional radial mount. box and manual

12 V DC @ 107 A Power Supply, to run chargers
I purchased 15 of these power supply's several years ago, and made 12 in case charger supply's. I now have only 1 left. These are not ~|Pulls~| from servers. They are new/unused. They cost $400 new,

Orbit Microladder Charger
Orbit, Microladder Charger can charge all batteries as any other charger, and up to 11 LiPo. This charger is made in Germany and originally sold for $200. When used with a balance board, it can do wha

Magnum XL-91RFS
new in box

EVRA-190 (30 CC gas engine)
this is a 30 cc gas engine with electronic ignition and muffler looks good.

Frank Knoll 38% Christen Eagle RARE!
Frank knoll 38% Christen Eagle Air frame or ready to fly with TME smoke system In good shape owned it for many years last flown 2015 Engine is a Husky Challenger 4.4 with custom built smoke generating

Hangar 9 Aspire - EP (RTF)
Beautiful Aspire 2M Glider Excellent Condition: Includes 2 Channel Hitec Radio,Receiver & Servos, New hi Power Jeti Phasor 30-3 Brushless Motor, New 12X6 Graupner CAM Folding prop and Spinner, Also

Blade 450 3D
Has plane and radio and paperwork

Garage Sale
#1 OS 50 SX NIB $150.00 #2 OS 91 FX $175.0

1/6 Byron T34B Mentor
This kit has the retract ready wings, cockpit kit, new canopy. One stab has been started by me, which you will find is a ten! Some decals missing but nothing to complete a warbird trainer version, plu

flybarless exceed 300 new parts replacement


Blade Chroma Drone with 3 new battery,s
New Blade Chroma with carry case three batters charger St10 transmitter C03 cameras all systems checked G'zOne quad retail value is $1,350.00 selling for $799.00 New in case

Blade 200 SRX NEW HELI BNF with 3 battery,s
NEW 200 SRX BIND AND FLY SPECTRUM OR JR TRANSMITTER 3 new BATTERY,S 11.1V GREAT FIXED PITCH HELI BIND AND FLY

Dynam 250 Razor parts


O.S. Engines O..S. .95 AX
I am selling a new OS 95 AX Two Stroke engine for $179…… an honest bargain. The engine is brand new and still in the original box just as I received it from Tower Hobbies. The engine is pristine, is

Futaba R6203SB Rx Free Ship Cont US
Futaba R6203SB S-Bus Receiver. Never been in a crash no damage. $40.00 Shipped free in Cont US

O.S. Engines O.S. FS-1.10A
I am selling my new OS 110 alpha Four Stroke engine for $199…… a real bargain. The engine is brand new and still in the original box just as I received it from Tower Hobbies. The engine is pristine,

Futaba R6303SB Rx Free Ship Cont US
Futaba R6303SB S-Bus Receiver. Never been in a crash no damage. $40.00 Shipped free in Cont US

Futaba R6208SB Rx Free Shipping Cont US
I have a Futaba R6208SB, never crashed or damaged. $75.00 Free Shipping Cont US.

O.S. Engines O.S. 1.60 FX Ringed -Pristine $179
I am selling an OS 160 FX, ringed with muffler for $179. The engine was run one time on a test stand using an after market muffler for the initial break in. Following the break in I decided that the p

Futaba 9ZA WC2
Listed for sale are my 2 Futaba 9Z radios combo package. The 9ZAP WC2 is a low time radio that is in excellent condition. The screen is clear and the radio looks like new. All switches, dials and s

WW1 97" Bristol Scout and others
For Sale short Kits: EAA Bipe-80~|-$189.99 EAA Bipe-88~|-$199.99 L4/NE1/J3 Cub-129~|-$279.99 Flybaby-84~|-$189.99 WW1 Bristol Scout-97~|-$249.99 Miss Los Angeles-72~|-$209.99 Miss Los Angeles-

3 RC Helicopters and DX7s 7ch radio
eRazor 450 helicopter & replacement parts Blade 120sr helicopter & replacement parts MCPx helicopter & replacement parts DX7s radio transmitter & charger Batteries, charging station All heli's

Various tools
2 sealing irons 1 micro torch 1 engraver 10 iron covers 4 soldering irons roll of silver solder and flux micro torch is model sx22050 syntax electronic ignition Reduced to 40.00

QQ Mamba ARFSV super combo
After mulling it over for the last week, I've decided to put my Mamba up for sale. Biggest reason its a PITA for me to get it to the field (I drive a WRX...lol) and its about an hour and a quarter to

Dalton 300
40% Dalton 300 with DA 150 on canister, digital servos with powerbox, IMAC ready.

Top Flite AT-6 Texan
Hello, for sale is a new top flite Texan kit new in box. This is the wood kit not the arf. $200, no shipping and no trades. The only thing I would consider is dropping off the items at a ups or fedex

Dynaflite Super Decathlon - 1.08
Super Decathlon Balsa kit new in box. Not needed. $150.00 for local pickup only. No trades no shipping. The only thing I would consider is dropping off the items at a ups or fedex store, and the buyer

Losi 5ive T Used very little Never Raced
I have a Losi 5ive T used very little has mabey had 5 tanks of gas run through it Truck is all stock never been touched or upgraded in any way. Comes with a DX3S Spektrum Controller this will show tel

three planes too trade
I come to the state of mind to fly big slow planes ...I will trade the plane below for a 1/3 Balsa pup or 1/3 cub ect ...or what have you that flies slow...Remember lets go equal value each ... Habu

Troy Built Models DV8R
great sport jet, I bought it second hand and will not fly enough to justify. covering is not perfect . has smoke system. it needs a new elevator servo.( last flight an elevator servo wasn't right.)

Wtb kingtech k120g
I am looking for a used kingtech K-120-G. Anyone have one they would consider selling?

WTB (2) Cheap 2.4ghz RX & TX
I am looking for 2 complete 2.4ghz setups for my kids rustlers. They keep breaking the antennas on the AM radios that are in there currently. Not picky on brand as long as they have an internal antenn

Hitec Optima 7 MINT 1 yr old no crash free ship
Mint 1 year old no crash  Any questions just e mail. Product Description Ideal for most applications, the Optima 7 is the workhorse of the Optima line of receivers. Featuring full telemetry ca

Tiger Moth
Large scale Tiger Moth including OS91 engine and Futaba radio. I think it may be a ECOMRC kit but I was not the builder and this is just a guess. Nice work on construction by a very experienced builde

Turnigy TGY-390DMH (4) coreless,dig,BB,MG free ship
Package of 4 servos NEW opened lost interest in project and removed. FREE SHIPPING TGY-390DMH High Performance Digital Servo (Extra Strong) 5.4kg / .11sec / 22.5g Specification: Weight: 22.5 g

Dromida DT4.18 RTR 2.4GHz with Battery and Charger (1/18 Scale)
Excellent like new condition. Senior owned. Only used for about 10min. Thanks for looking and feel free to email with any questions or concerns you might have. SHIPPING TO LOWER 48 STATES ONLY

Snipe DLG SN Version
Unused Snipe DLG light version wing, short nose fuse. 1 yellow stripe wing 1 white on black wing I get discounts with fedex, so that will be the shipping method. Dont hesitate to contact me wit

JetCat P-200
Hey guys. I've decided to put my f16 on a diet. So I'm looking to sell this to get a bit smaller of a turbine. Engine is flawless and runs perfect. Never a failed start or flame out. I have

Hangar 9 P-47 D Thunderbolt - 60
New Assembled and is ready to Bind and Fly. Brand new and assembled by me. Just bind it to your specktrum system, adjust the travels and fly! Comes complete minus transmitter. Installed, never

Futaba S3010 Std. High-Torque


Futaba S3152/excellent used digital servos
Have for sale 10 excellent used S3152 digital servos. comes with mounting grommets and control horns, no box. These sell for $35.00 ea new, asking $20 ea and will sell in lots of 4ea since I am paying

Nor-Cal Harvard AT-6
NOR-CAL AERO Harvard AT-6 UP FOR SALE WING SPAN 65~| LENGTH 43~| POWER 60/80 2 OR 4 STROKE SCALE APPROX 1/8th box is in fair condition but the contents are great

Lanier Laser 200 1/4 Scale + Extras
NIB, Out of production kit. Kit features: >AFTER-MARKET FIBERGLASS SPECIALTIES COWL >Bud Light Laser Graphics >Balsa sheeted symetrical foam wings with aluminum tube >Built-up balsa & ply fusel

Schlundt Stampe SV4
For Sale is my Schlundt Stampe SV4. Here is the website to see more pictures of my plane and it's stats. Schlundt reduction gear with G62 Futaba 14 channel receiver. Fantastic flying model, never cras

Robart Retracts Wanted for Great Planes Seawind
Have a crashed Seawind or or set lying around from an unfinished project? Part number is #530Seawind Please let me know what you have and thanks...

Desert Aircraft DA-100
For sale is one lightly used DA100 with headers. The engine and ignition are in great shape. Thanks for looking!

HANGAR 9 INVERZA 33 (HAN4925) NEW IN BOX
Have for sale one NEW IN BOX Hangar 9 INVERZA 33 ARF(HAN 4925). Would like to sell locally, but will ship if buyer will pay 50%  shipping and insurance costs, Shipped in the U.S. only.  Plan

SPEKTRUM AR10000 DSMX NEW
SPEKTRUM AR10000 DSMX RECEIVER WITH 2 SAT. •10-channel full range receiver •Patented MultiLink™ receiver technology •Includes one internal and two remote receiver •An optional third remote recei

HPIC7184 - HPI Racing '69 Dodge Charger Clear Body Savage/T-Maxx
Hello, Selling sealed, brand new HPIC7184 - HPI Racing '69 Dodge Charger Clear Body Savage/T-Maxx Thanks for looking!

Traxxas 3615 Stampede Body VXL with Decal Sheet, Stampede
Hello, Selling sealed, brand new Traxxas 3615 Stampede Body VXL with Decal Sheet, Stampede Thanks for looking!

SPE 26
SPE 26 Good engine, just not needed. Ignition cable is frayed but is sealed. Does not affect performance.

Power Box Competition
This is a brand new Powerbox never used... It's very easy to install and program. Dual battery backup gives you a sense of security of a battery fails during flight. Plus your able to sync multiple

F4 Phantom
This is a discontinued Great Planes F4 Phantom propjet.

O.S. Engines O.S. FT-240 Twin
this is  a very low time OS 240  twin 4c glow engine    l will include wire and plug connectors and a special twin glow liter    also include original box and i

Ziroli F4U Corsair
For sale is my ziroli corsair   complete ready to fly with 4.2 gas engine  it is built up glassed and painted panel lines and rivits .robart retracts all around  with doors  h

Traxxas Jato 3.3
For sale is a RTR Traxxas Jato 3.3 and comes with everything you need to get going. I have two jatos and need to sell this one to finish another project. Truck has a little over half a quart of 20% fu

MXS-R 50cc Gas 3D 88"
Scale MXS-R 50cc Gas 3D Build aerobeez Wing Span: 89 Length: 84 EME 55cc Engine with auto starter prop 3blade 20x10 carbón fiber price $550.00 firm Contact 8137537933

B-26 MARAUDER WING S 138
Enlarged Jerry Bates plans wing span 138~| fuselage-105~| Sierra landing gear .servos Hitec 645mg. and Futaba 1/4 scale .It had D.B 5.1 - 83cc for power (NOT SUPPLIED ) The B-26 is constructed of foa

Top Flite Power Point Propeller Balancer
Top Flite Power Point Propeller Balancer With Instruction Manual. New $23.00 Plus Tax And Shipping Charges....SAVE YOURSELF SOME MONEY!!! ; Buy mine for $14.00 plus shipping. email me for photo

O.S. Engines O.S. .61 FX
OS 61 FX with Muffler, will include, 1 New TF Prop, 1 New Glow Plug. 1 New Great Planes Precision Fuel Filter, 1 New Fuel Tank, also 1 red spinner.. This engine Has ONLY 1 flight on it since New, and

discus glider
hi what I have here is a scale discus glider it has a 110inch wingspan its a nice glider it has a couple of cracks in it but thay are on the outside only very little prep work and thay will be gone! t

3 rc airplane's cheap!!!
hi I have 3 rc airplane for sale cheap! you could not buy one airplane at this price and have them ready to fly! thease are ready to fly with sevos already in them and engine's! and yes thay all run g

Webra Blackhead .61 glow engine
This is an older German made Webra Blackhead glow engine. It has NEVER BEEN RUN OR FLOWN and is factory new in box. The engine turns over well with excellent compression. These older engines did not c

Model Tech ME-109 - 40
New in box, complete and still sealed Messerschmitt ME109 ARF 40 size balsa kit. Features: - ARF all wood airframe - Pre-painted fiberglass cowl - Good low speed handling, - Includes color de

Quick sale !
Sbach 30cc. W/ 26cc. SPE gasser just broken in, kill swich and volt watcher , 2 servos on elevators and one for pull-pull rudder , no servos in wings. Local pick up only no shipping. Asking $350.00

ASP .91 ABC Series 3
I need a rear crankcase part for 10-15 year old ASP Red Head .91, two-stroke. Any useable condition is OK. If you have the part or a well used/junk complete engine that has an undamaged back piece, I'

Flight-Models 93" Extra 330SC
Flight models 93~| Extra 330SC new in the box with extra cowl(blue scheme). Don't have the funds to finish project so I'm selling it. Flight models is the same company that builds the Aerobeez ver

Great Planes Big Stik 60 RX Ready
Have a receiver ready like new Great Planes Big Stick 60 ARF with like new OS 61FX, like new Futaba 3004s and like new 1100mah NiMH battery. I bought everything new and broke the engine in very carefu

MTW TD110 Cans and DA Headers
Two MTW TD-110 can in good condition One operational MTW TD-110W. Headers for DA.  Sorry, not sure if it was for my 150 or 170. Misc mounts and supplies See picture. $200 buy pays shippin

SPEkTRUM 9 channel receiver
I have a SPEKTRUM  9 channel receiver in original box just like new With two remote receiver for $90.00 dollars I paid $149.00 + tax and shipping .

JET TRONICS VALVE
I have 2 jet tronics valve for sale one for break and one for landing gear both for 80.00 dollars or best offer .. landing gear valve for $50.00 and other for $30.00

1/5 scale P51 Mustang
FOR SALE HIGHLY MODIFIED 1/5 SCALE TOP FLITE P51 Ready to fly minus receiver, includes: 3W70i engine (about one gallon of gas), two 1800mAh Life with Booma RC dual battery sharing circuit for the ele

Two Sig Canopies for 4 Star 120 Models
Here I have two Sig 4 Star 120 NEW Canopies. They are for the Sig kit but can be used on any other model with no problem at all. I am asking $20.00 for the pair plus the actual shipping cost to be

Emcotec Smoke Pump PowerSmoke 740 HV
I'm selling an Emcotec Smoke Pump PowerSmoke 740 HV Part: EMCA90052 in perfect working condition. These sell for just about $200.00 Asking $130 Shipped in the USA. Add 3% for PayPal fees or send a US

Magnum XL-180 RFS
EXCELLENT CONDITION MAGNUM XL 180 RFS engine with great compression.  Came out of an airplane I bought.  Doesn't appear to have much time on it and is fairly clean.  Not gummed up and n

Futaba 10J transmitter
Used for one summer Futaba 10J radio and charger. Call or text Michael at 205-534-7440

BVM Bandit ARF MKI Gear Door Kit Air
HI Guys Selling a brand new Gear door kit for the Bandit ARF MKI air powered. Sceme is white orange and blue(xtreme blue) . Gear door nose and main is in dark blue(xtreme blue). Can be of course

Extreme Flight Yak 54 - 88
Extreme Flight Yak 54 88~| edition with a Desert Aircraft DA-50 Gas engine. New Falcon carbon fiber prop with covers. Carbon fiber wing rod. WINGTOTE wing bag that holds wings and rod. Plane is a 2

BVM F-86 Sabre Gear Door Kit Air
HI Guys Selling my untouched Gear door Kit for BVM Sabre 63~| for Sabre ARF or Kit Verision. As you can see all Hardware is included to fit the gear doors to your model. Was purchased and i never

Miss Vegas RTR nitro hydro
Miss Vegas 2 RTR nitro hydro. Good condition with brand new motor (never started) Add your receiver and battery to go racing.

ESC Schulze Future 40.161 xl
For 3-14S LiPo or 10-40 Nixx 160A cont. 210A max. Made in Germany! Other extraordinarily features ~|State Of The Art~| are: • Integrated blocking capacitors (these are space-saving placed insi

ESM T-28 NEW
ESM T-28 New never flown or even seen fuel. New 36cc gas engine. 3 blade adjustable carbon fiber prop. Serria retracts with robart air system. New battery kill switch installed. Dragon pilot's. Any qu

Jetcat P180RX
Jetcat P180 RX serial # 180118 Pablo was flying a Carf J10 when wind blew over on a low hover. Engine was lightly damaged and sent in for repair. New: Cowl Plastic intake Bearings Compre

Zenoah G-62
Nice G-62 set up for smoke, comes with smoke pump and two types of shut off valves. No muffler but B&B sells them.

Zenoah G-62
Clean used G62, no issues, just missing one pipe. Has no effect on how it runs.

Phoenix Tucano 40. Airframe only
This is an airframe only!! Very nice flier, just downsizing some.

PBY Catalina
Very nice PBY, great flyer, will fly off grass or water takes 3 or 4 cell LiPo. Just add the transmitter, receiver and battery of your choice and go fly.

RCM 15-500
Ready to fly RCM 15-500 ready to fly, plane has flown but never crashed, well built and in good condition. This vintage pylon racer is a great find. (engine and radio not included)

Custom Low Wing airplane
This custom designed vintage low wing airplane while quite agile to perform all kinds of skilled stunts, it provides a great low wing transitional airplane. Well built and covered with Super Monokote

Solo by SIG
Great intermediate airplane (or advanced trainer), vintage high wing airplane, originally made by SIG. Built with extreme attention attention to details and superb craftmanship, NEVER flown. Covered i

Great Planes Extra 300S - 40
I have brand new in box Great Planes Extra 300s 40 size ARF. I haven't seen one of these for sale in a long time and this one is pristine. This is my all time favorite covering scheme, and I was goi

Century Radikal G20 RTF
New, assembled but not flown Radikal G20 Heli. New Zenoah 20 engine, muffler, 2 sets of main blades and Align 610 servos on the head. Futaba on tail, and a JR DS821 on throttle. Comes with the starter

os max .35-s vintage c/l
o s max .35-s vintage control line engine,in excellent shape lots of compression. non-r/c engine with no muffler. never had one. runs great complete with a veco spinner and prop. asking 35.00 plus 7,0

JR 28X 28-Channel DMSS System with Case and extras
Like new JR 28X 28-Channel DMSS System with Case plus: 1 RG712BX 4 infinity receivers 3 duo 1 Programmer 2 xb1-cv2 3 xb1-pc2-50 2 xb1-pc4 1 xb1-cv4 Ill even throw in a powerbox cockpit SR

TamJets A-4
Fresh build . Not flown all, tam-jet gear ,brakes wheels struts,tanks. Tanks pick-up location, moved ,for perfect fuel draw at all positions. Extra 12 oz tank if you need more time in air .all con

Top Flite P-40 Warhawk - 1/5
new out of the box, top flight p-40, do not have the box. comes with brand new pneumatic mains and tail gear from robart, with the tank, service port, gage and valve. also comes with a new unopened dl

Thunder Tiger Raptor 90S
For Sale Raptor 90 with os91sx This is a Raptor 90. Comes with OS91 SX with pump Only used a gallon of fuel in it. Futaba 611 gyro with a 9256 digigal servo for tail 4 --9252 digigal servo

10 ngk cm 6 5812 spark plugs
lots of 10 plugs,cm6 5812 ngk spark plugs shipped to your door in lower 48 $49.00 they fit dle gas engines and alot more

Top Flite AT-6 Texan
FOR SALE TOP FLIGHT AT 6 HAS ALL HITEC SERVOS 2 BATTERIES FATUBA 8 CHANNEL RECEIVER, G20 GAS MOTOR HAS NEVER BEEN CRASHED OR HARD LANDED THE RECEIVER IS FOR A SUPER 8 RADIO BUT WILL WORK WITH OTHER FA

Seagull Space Walker II - 46 by sig models
THIS IS A VERY GOOD FLYING PLANE, I SOLD THE MOTOR,AND I AM ALSO GOING GAS, IT HAS ALL THE SERVOS AND A RECEIVER BATTERY BUT NO RECEIVER, IT BASICALLY JUST THE AIR FRAME BUT ALL YOU NEED IS A RECEIVER

Radio Control Switch Color Nut for Futaba and JR
Used for Futaba transmitter and JR transmitter Multi color set contains 6 color nuts (red, Orange, green, purple, blue, Gold 6 colors) Length of nut corresponding to long handle control switch an

Brian Taylor F4U-1 Corsair 75" ws fiberglas kit
This sale is for fiberglass fuselage fiber glass cowl clear canopy Wing ribs and plans for 175 shipped

REDUCED!! RCGF 15cc
I have a NIB original RCGF 15cc with the machined case and stand off mounts. Need the beam mount version. Will consider a trade for beam mount RCGF or Evolution 15cc. Shipping is included in price. 1

40pcs Carbon Steel Surgical Scalpel Blades with 2pcs Handle
Blades made from carbon steel. Handle made from stainless steel. Sterilized by gamma radiation. Ideal for Craft, Carving, Dissections, Etc. Included 20pcs #11 Blade, 20pcs #23 Blade + 1pcs #11 H

YS115FZ-S New in box with warranty
New in Box, perfect, best price online. Buyer pays shipping of $15. Warranty included, is from YS, as it is new. MJ 3108787018 human213@gmail.com

O.S. Engines O.S. FS-40 Surpass Ringed
New in box, no muffler. All exhaust threaded extension, remote choke accessory, hardware, and also includes a $30 O.S. factoory motor mount and all hardware for aircraft mounting. Never seen fue

YS .91 Tareq Heli new in box, complete
New in box with warranty, Ys .91 Tareq ultimate heli engine. Complete, manual and warranty buyer pays $13 shipping in usa michael 3108787018

Great Planes Shoestring - 60
NEW NEVER FLOWN Great Planes Shoestring - 60 ARF. Never Flown or Fueled. Beautiful airplane. Included 1 New Spinner, 1 New TF Prop.1 New Fuel Tank, ~|Radio and Engine NOT included~|. Want a mode

Futaba S3003
Removed from my airplanes. Slightly used. One servo kit includes: •Four rubber grommets to isolate vibration •Four brass eyelets •Four Allen head self-tapping mounting screws •One large

2S-6S Lipo to USB Power Converter Adapter w/Digital Display 5V 2A
These are great for for charging up your cellphone at the field or using it for anything that uses a usb plug. Maybe charging other batteries with it Comes with either TPlug or XT60 Plug

Try-Turn Yellow P-38 spinners and props
Two Tru-turn spinners for the Yellow P-38. Also included is two sets of props, both Zoar, one 20/12, the other 20/8. These were cut for the ZDZ 40. I have those engines for sale as well. Price i

futaba servo S3001
I have 4 futaba servos S3001 removed from airplanes. little use. One servo kit includes: •Four rubber grommets to isolate vibration •Four brass eyelets •Four Allen head self-tapping mounting s

10pcs Solder Iron Tips For Hakko
900M-T-B, 900M-T-I, 900M-T-3C, 900M-T-2.4D, 900M-T-K, 900M-T-1.2D, 900M-T-3.2D, 900M-T-2C, 900M-T-1.6D,900M-T-4C These tips are plated with lead-free solder. FOR:900M.933.376.907.913.951,898D,852D

Kondor Model Products B-25 Mitchell
Assembled, never flown B-25. KMP (ESM). Absolutely perfect condition. Has 2 brand new OS 70 4 strokes, never been fired up. The plane is weathered, and has some panel lines, enough to make it look gre

Kraft RC Transmitter/ Receiver set
Kraft sport series 72.320 Radio control System circa 1979. KPT-6A Comes with six servos 2 FM receivers 2 battery packs original Charger (not shown) Instruction manual Kraft System 1979 Catal

Soldering Jig
This is a cool device , Great for all kinds of connectors Works with T- Plugs, XT60 , XT90, Mini T-Plugs, Bullet plugs of all sizes

HB HB-61 PDP
This in a new PDP red letter early version 61 Classic. Never ran, bristle condition. Includes engine, muffler/screws, prop nut and washer. HB engines were produced in Germany by Helmut Bernhardt Feinm

CMPro Zero Fighter 50cc
CMPro composite Zero. 82-inch wingspan, 1 piece wing 3MM TOC 53cc engine with smoke muffler Smartsmoker smoke pump Century Jet retracts Century Jet 4 way valve Robart air tank TBM Air Pressur

NEW DLE 120
Brand new, just received from Tower. Untouched and unmolested. Seller will ship or you can pick up in Orange County or Coachella Valley. Comes with everything as direct from DLE (ignition, muffler

Non-Slip Flexible Flex Shaft Fits Rotary Grinder Tool for Dremel
Non-slip flexible shaft, Grinder attachment for rotary tools The connection is for 3/4~| thread (Suit for Dremel 100, 200, 300, 4000, 7300, 7700; Foredom, ToolShop;Performax; Milwaukee M12) Speci

JDM or NWHT assy video or Zero info
I have a JDM NWHT Zero kit, only the foam parts a cowl and canopy. I know they included build videos with their kita and this is what I need, I do not know if a plan was included with these kits but i

ZDZ 60 RV
I had this engine in a 21 lb. 33% Pitts Special biplane. I sold the airframe and kept the engine for future use. This engine is very strong running using a 22~| to 24~| prop. I am now going to larger

Futaba R617FS
Have 4 Futaba R617FS 7ch receivers new in box. Asking $60.00 ea. Will accept Pay pal, money orders, or cashiers check. FREE shipping in U.S. only. Any questions, feel free to call or email me, thanks,

Futaba 6EX 2.4GHz radio
-brand new; never used (see photos) -removed from brand new radio system -NiMH battery and smooth throttle metal tang also included! receiver not included

Saito FA-82
Have for sale 1 Saito .82  4 stroke engine in excellent used condition, great compression, smooth bearings, no crashes, very low run time. No box or instructions. Asking $200.00. will accept Pay

Futaba Telemetry Sensor GPS SBS-01G
Futaba Telemetry GPS Sensor. Excellent Condition. Flew with it about 5 times. Had it in a quad racer since i lost one quad. Now I fly races and dont fly far. Track your plane and you can find i

Align T-Rex 500 2 for 1
2 Helis for the price of 1 1 Align Trex 500 flybar heli with DS510 servos on cyclic, DS520 with Align gyro on tail. 1 Align Trex 500 flybarless with Hitec HS-5245 metal gear digitals on cyclic

JET BYRON A 4
NEW STARTED BYRON A-4 SKY HAWK NEW~| SPORT WINGS CUT~| BETTER AIRFOIL ,MORE SPAN ,COVERED ,FLAPS SCALE LOCATION.. HAVE COVER FOR BOTTOM FUSE HATCH {CHEATER HOLE] SETUP FOR DYNAMAX OR TURBINE

Sig Somethin Extra - 40


Redcat Mirage
Selling a Redcat Mirage 1/8 scale buggy I got in a trade. Only ran it once and have not touched it since. Everything is in good working order and operated as it should. It included a set of sand paddl

Zenoah G-62
Wanted: Zenoah G62, New or near new.

POWER MAX FUEL VALVE NEW
POWERMAX FILL VALVE PART, THAT GOES ON CAN INCLUDED. NOT IN PICTURE

Fly Sky FS-TH9X


Hitec Optima 9 RX New In The Box -3 Pak
Brand new Hitec 3 pack Optima 9 channel RX for $149. This is three separate Optima 9 channel receivers purchased as a package of three. Pristine condition, never used and in the box as they were deliv

TRU-TURN 3.5" 2- BLADE SPINNER - NIP
A New-In-Package  TRU-TURN 3.5" DIAMETER SPINNER #3502 - 2 BLADE .   Package hasn't been opened.  This diameter is perfect for many kits such as the 60 size Spitfire, P-51.

Spektrum A6150 HiTorq Dig Servos
I have ten (10) brand new in the box Spektrum A6150 servos for sale at $17.50 each. These servos are just as I received them from Horizon Hobbies, new condition and are still in the original packaging

OS NITRO MOTOR NEW.
OS max 30vG (p)ES PART# 13966 BIG BLOCK WITH ROTOR STARTER BACK ON IT FACTORY. FITS TEAM LOST MONSTER TRUCKS HPI SAVAGE AND OTHER MONSTER TRUCKS THAT TAKES BIG BLOCK. No trades Tower sells

JETPRO PIPE FOR BAJA 5B
Jetpro pipe high performance silenced V2 pipe brand new for the hpi Baja 5b

DLE DLE-20
I have a used but only flown 2 times DLE 20 in box and runs very good easy to start moved to 50cc plane and engine Will consider trade for electric Trojan plane

Goldwing BiPlane ( PITTS )
I have for sale a Goldwing Pitts Python BiPlane 60~| wing span Beautiful color scheme, Red, Black and white Assembled with Plug in wings can be flown with 30-35 cc or electric very light weight

US Engines 41cc 2.5 RC
Includes cut off switch and spring start runs good strong engine, Postal Money Order ONLY!!!!!!! FREE SHIPPING!!!!!

Goldwing RC Sbach 342
I have up for sale a new and test flown only 74~| Sbach ready to fly less receiver and batteries Digital 185 in, oz servos New DLE 35 cc rear exhaust 2 ea $30.00 pilot light / charge switches Car

Kingtech k100g
For sale k100g i can transfer warranty I will ship the item worldwide buyer will pay shipping charges 60 to 100 USD with tracking Turbine will be shipped in original box Kingtech k100g 142 min

Powermax Canister Trigger Valve WANTED
I found a couple bottles of Powermax Propane/Butane and now I need a trigger valve for them Anyone have any laying around that they dont use since they stopped making them?? Thanks Johnny

Hitec HS-5685 MG servos
I have three (3) brand new in the box Hitec HS-5685 MH servos for sale at $19.95 each. These servos are just as I received them from Tower Hobbies, new condition and are still in the original packagi

Hitec HS-5665 MG
I have nine (9) brand new in the box Hitec HS-5665 MH servos for sale at $19.95 each. These servos are just as I received them from Tower Hobbies, new condition and are still in the original packagin

Hangar 9 Ultra Stick Lite ARF - 120
Selling a hanger 9 ultra stick with an OS160. it has hitec HS625MG (4 in the wing, 1 for the rudder, 1 for the elevator. it has a spectrum ar 1000 with satellite. it was converted to a pull/pull on th

Hitec HS-5625MG
I have four (4) brand new in the box Hitec HS-5625 MG servos for sale at $19.95 each. These servos are just as I received them from Tower Hobbies, new condition and are still in the original packaging

T-2J Buckeye Ducted Fan
I see the kit is missing the wing box. The box includes all the fuselage parts including tail sections, cockpit, canopy and a stack of balsa. All of this is brand new but missing a lot of parts. 

Hangar 9 Toledo Special - RTF
********local Pickup Only******** Up for sale is my H9 Toledo Special. Plane with less than 10 flights.Engine is still new and need break-in. Every thing installed in this plane was new when buil

servo extensions
servo extensions. 15 in all. 5 long, 10- 12 in, and 10- 6 in, all in good shape . no bent prongs, no cracked plugs, no frayed wires.also two switch harnesses included, with charge lead asking 17.00 pl

O.S. 91 Max FX - $80 shipped.
Looking to sell my OS 91 Max FX glow engine for $80 shipped. This engine is ready to run now. Just add fuel. Instant starts, great transition and strong top end rpm. Good compression and silky

Traxxas E-Revo brushless nip sealed
Latest Traxxas erevo out with stability management and Bluetooth. Only trade I'd be interested in is a losi 5ive and would have to meet in person. Only looking to trade locally,or sell locally. No shi

Demon Cortex 3 Axis Gyro System NIB
Recently purchased brand new Bavarian Demon Cortex 3-Axis Gyro System for RC. The packaging is still sealed from the factory and has never been opened. $169 shipped to lower 48. Please feel free to em

E-flite EFL3005 Twist 3D 480 ARF
E-flite EFL3005 Twist 3D 480 ARF 2- Hitec HS-65MG Aleron servo's 1- Turnigy TGT9025MG Elavatorservo 1- Turnigy TG9025MG Rudder servo E-Flight 480 Motor FHH 40AMP ESC 2-Zippy 3 cel 2200ma 30C Bat

OMG 20 kg servos
Type : Digital Operating Voltage Range 6.0-7.4Volts DC Bearing Type  Dual Ball Bearings Speed(S/60 degree at 6.0V/7.4V) 0.20/0.18 Torque oz/in.(6.0V/7.4V) 250/278 Torque kg./cm.(6.0V/7.4V) 18/

Hangar 9 46% TOC Ultimate 10-300 "REDUCED"
Plane has DA 150, Hitec digital servos, smart fly system, etc... A lot of time and setup has gone into this plane, I am pretty fussy when it comes to my builds. All servos are matched for precise flig

Enya 19-V
in original box with papers..this is a nice clean engine ..looks great ..strong comp. when I bought it at a RC fle market he told me it was new ...so I bought it ..got it home and it looks new but it

Rxcel HD Power Switch
Rxcel Heavy Duty Power Switch with covered charge port. New in package. $7.49 for one! $6.95 each for 2 or more. Plus Shipping NO PAYPAL FEE! CHECK OUT MY OTHER LISTED ITEMS

RC10 #6010 A Stamped Gold Pan
A vintage RC10 off road 1/10 scale buggy. It is a gold pan ~|A~| stamped chassis. This buggy is in super good condition. It has a couple of lite scratches on the bottom of the pan. It has stock vintag

HPI Racing Baja 5B FLUX Brushless - XLX Esc, 6s Lipo, Extras
Up for sale is the Famous HPI Baja 5B Flux Brushless Electric Buggy. 6-8s setup.. Purchased brand new a few weeks ago...I have all original items including Original Box..it's Truly RTR...I am includi

KingTech K-80F
I don't need the engine anymore, so it's available for sale. I sent it for 25 hours service, it's back like new again. Never had a single problem, it served me excellent. kerostart version. (see attac

New,used, non-running or parts for jc evo gas engines
Like the title says I'm looking for NEW, USED, NON-RUNNING or PARTS for  JC EVO gas engines!! PLEASE message me let me know what you have and what your prices and we can talk from there. Thank

M46 ROSSI
M46 ROSSI brand new THE MUFFLER IS USED DONT HAVE THE NIPPLE PRESSURE FITING

BVM King Cat
BVM King Cat kevlar fuel cells Excellent condition!!

BVM King Cat retract set w/Pro-Link struts
For Sale Full set of BVM KingCat retracts with Pro-Link main struts Excellent Condition

BF 109 combo
Hard to find BF 109 with castle esc. Eflite motor. All servos installed. Upgraded retracts. Lots of extras. $1000 invested. Need final installing and setup. Local pickup only no shipping.

BJ Craft Monolog 2M Gas Engine Mount Plywood
Hi guys, I am looking for the plywood gas engine mount hardware that originally came with the BJ Craft Monolog 2M pattern plane. The ARF came with the plywood mounting hardware for three different

Trailer
Height from floor to underside of sliding shelf/formerly the campers bed is 19~|, height from underside of roof to floor of non shelf area is 25~|. Overall inside dimensions are 5' by 8', the sliding

YS Engines 1.20 SF
I have for sale a YS 120 SF. The engine has been benched run two tanks of fuel. The engine flew two flights in a Carl Goldberg Ultimate 200 and I replaced it with a DLE-20 The engine is a ve

Futaba 7CAP
Up for sale is the TX with battery and charger. This TX can easily be converted to 2.4Ghz using a multitude of kits.

Magnum Pro .45
Great running engine, good compression, bearings are smooth, runs very strong. Includes glow plug, but missing the prop washer. Asking $30 plus $7 shipping in the lower US 48. Payment by money or

AeroWorks Extra 260 50cc
Aeroworks 50cc Extra 260 with DLE-55 offered for sale. This plane is several years old, however I have taken multiple overseas assignments the last few years so it has less than 200 flights on it. Com

Top Flite P-51D Mustang - 60
This 65 inch wing span, P51D Mustang is virgin (Never been flown.) My friend built it with meticulous detail, and never got to the skill level to actually fly it. But he sure knew how to build them! H

JETLEGEND 1/7 JAS-39 GRIPEN
Hi everyone i am looking for JETLEGEND 1/7 JAS-39 GRIPEN

DLE-111 V2 New in Box for Sale
DLE-111 V2 new in box for sale. This engine has been out of its box twice - once when I first received it to check it over and once to take these pictures. It has never been mounted or run. As is norm

Bobcat - 50
Has New OS .91 FX with custom muffler.  8 Hitec Servos Needs TX/RX Battery, Pusher Prop Has Robart Mechanical Retracts. NO SHIPPING. Local Pickup Only. Wing Span: 51 in / 1300 mm Wi

Great Planes Escapade .61
Everything you see is brand new and never been used.Plane has been flown twice and flew fantastic!....Comes with everything you see! ready to fly, radio,servos,batteries, Magnum .91 four stroke engine

4 Brand New 11.1 5200 Lipo battery best offer
I bought these for a project a few months ago on eBay for almost $200. They have never been charged and I have no use for them. Best offer will be accepted no matter how low.

Wild Hare R/C Extra 300LX Special
This is a 88~| / 50cc WildHare extra 300 it has a futaba receiver and is complete with a DA 50 and all digital servo's $400.00.

Enya 45 and servos..wreck salvage


Brand New Futaba BLS157HV Servos for Sale
I have 5 Futaba BLS157HV servos for sale. One is new in box, the other four are brand new and were powered up once to find center for mounting the SWB servo arms. Price includes the attached servo arm

Brushless retractable motor system electronic mixer control
Looking for the Brushless retractable motor system with electronic mixer control that came with the Tower Hobbies ST Model DG_1000  powered glider. If you have one from a crashed plane that works

Goldberg Eagle 2 Kit
This is a ~|new in box~| kit of one of Goldberg's famous trainers. I will also include a Sullivan slant tank, spinner, fuel tubing and chicken stick all at no additional cost.

Midwest AT-6 Texan - 1.20
All new construction, never run, never flown. Futaba 7C PCM transmitter Ralph Cunningham Zenoah G-38 Robart Retracts All paperwork, plus some extras LOCAL PICK UP ONLY!! However will d

Pica P-51D Mustang
PICA p-51 1/6 mustang  74 INCH SPAN  NEW IN BOX    200.00  C.O.D LOCAL PICKUP ONLY  

2 Futaba BLS172SV brushless, high voltage high torque servos, like new!
Two (2) Futaba HV BLS172SV servos. These are brushless, high voltage, high torque, SBUS & SBUS2 compatible servos. Bought these new for a new airframe, only flew it 15 flights and have moved t

O.S. Engines O.S. FS-70 Surpass
os engines 70 surpass 4 cycle engine. perfect condition. runs like a clock. complete engine and muffler. asking 190.00 plus 7.00 shipping in the U.S. PAYPAL ONLY. Don't wait for the price to go up.???

Traxxas Summit 2.4 GHz
I have a Traxxas Summit it has a dewalt brushed motor, proline super swamper wheels with F-11 rims, I will also give the stock wheels and rims with it, it has aluminum traxxas pushrods and tie rods, a

Hangar 9 Cap 232 ARF - 120 ..REDUCED..
Selling a Hanger 9 Cap 232 with a 73~| wingspan. NO crashed with it at all. ~|NO MOTOR~| This is the plane only plus servos in the wing and Futaba Sky Sport Radio and receiver. Just install your mo

RCM 15-500
Ready to fly RCM 15-500 ready to fly, plane has flown but never crashed, well built and in good condition. This vintage pylon racer is a great find. (engine and radio not included)

Tom Kitty MK40
Ready to Fly vintage Tom Kitty, sport pattern airplane from the late 1970's. Made by Jack Stafford...this plane was built from the original all balsa kit...

SIG Komander
Built and ready to fly, never flown, pristine condition...great trainer

Baby Ugly Stick Kit (ACE RC)
Vintage Baby Ugly Stick kit from the original designer of the Ugly Stick (ACE RC), the same classic and popular plane just smaller. A .25 or electric engine makes it a fun weekender plane...never star

Moki S250 Five Cylinder Radial Engine
Like new Moki S250 five cylinder radial engine. Three flights on the engine, sold the plane that it was installed in, excellent condition. Run on regular gasoline, with 40-1 Redline Synthetic oil.

Pica Spitfire Mk IX - 1/5
New in box 1/5 scale Spitfire. All parts are still in the original plastic bags. Nothing has been moved except to take pictures. Buyer pays shipping cost and it's heavy. Weighs right at 20 lbs. Plans

Need High Speed needle for Super Tigre V60
The HS needle on my Super Tigre V60 is broken off, so I need a replacement.

BVM Super Balsa Bandit
I am selling my BVM Super Balsa Bandit RTF. It has a JetCat P120 V4.0 ECU with propane start and around 15 hours. Older engine that still runs great with no problems. The plane has JR 8411 servos thro

Ziroli Hellcat-Complete Kit
This kit was cut by The Aeroplane Works about 25 years ago. Quality of the cutting and wood is as good as it gets !! Wing tubes are included as well as the canopy and a Fiberglass Specialties cowl. Wi

NIB KingTech K-170E
Brand New never used Kingtech 170E for sale along with all new components as shown in the pictures. Please, only serious buyers...No trades. KingTech K-170E   Propane Start Diameter: 114m

OS 60 Max FP
this engine looks like it came right out of the box. very low time with muffler. the max version has ball bearings. will get pictures

Hitec Spectra synthesized 72 MHz transmitter module
This module is in perfect condition. It will work with any 72 MHz FM transmitter that will fit a Hitec transmitter module. The Spectra synthesized module allows you to switch to any of the 72 MHz fre

EZ 330L - 45
R/C AEROBATIC SCALE MODEL EXTRA 330 L 45 2 CYCLE CLASS ENGINE 70 4 CYCLE CLASS ENGYNE THIS IS A COLLECTIBLE ITEM MADE IN JAPAN, GREAT FLY AND GREAT LOOKS

58pcs Assorted Sanding Grinding Polishing Rotary Tool Accessory Set Electric Grinding Mill Accessori
Assorted kits for sanding grinding and polishing. Match in the drill, grinding, wind mill, electric grinding and other machine for grinding and polishing operation. Suit for stainless steel, copper

Non-Slip Flexible Flex Shaft Fits Rotary Grinder Tool for Dremel
Non-slip flexible shaft, Grinder attachment for rotary tools The connection is for 3/4~| thread (Suit for Dremel 100, 200, 300, 4000, 7300, 7700; Foredom, ToolShop;Performax; Milwaukee M12) Speci

216pcs Rotary Tool Accessories Kit Sanding Polishing Tool
This product fits Dremel and other rotary tools. Various combinations of mounted stone point. Ideal for all types of cleaning, polishing, grinding, etc. This set of polishing tools are perfect for f

Right Angle Rotary Tool Attachment Right Angle Converter for Dremel
Application: Suitable for Dremel 4000, 400, 3000, 300, 398, 395, 285, 200, 275, 100, 8220, 8200, 8100, 800. Suitable for Hilda HLD-180-A and HLD-180-B. Features: Right angle attachment ergonomic

WTB : NIKKO Transmitter AM 2-Channels Band-3 : 27.095MHZ
hi Gents, I am looking for replacement for this NIKKO transmitter AM 2-Channels Band-3 : 27.095MHZ or any compatible models .. Please email me if you have any compatible full functional spare wh

YMF-5D WACO BI-PLANE
    THIS IS A  GP WACO THAT IS ONE OF THE BEST LARGE SCALE FLIERS. I HAVE LESS THAN 2 HRS FLYING TIME AND THE PLANE HANDLES LIKE A 60 BIPE.   ITS IN EXCELLENT SHAPE AND

51 in 1 Tools Kit
Specification: 1. Model:K-T9051 Versatile Screwdrivers Set 2. Material: Chrome Vanadium Steel 3. Box Size: 150x125x35mm (LxWxH) 4. Application: Fit for repairing mobile phones, laptops, MP3, toys,

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. Much lighter and eaiser to manage th

Pica Duellist 2/40
Complete nib duelist kit from pica. I inventoried the kit to make sure it is complete. RCU's market research pricing shows they go for $225-$275. I don't know how accurate that is so I'm asking for $2

Tamiya lowride pumpkin body midnight pumpkin
New lowride pumpkin body, comes with the box, wheels (no tires), complete body and decals.

JR Style Servo Plug Set Gold Plated Male & Female x 3 packs
You get 3 packs of 10 pairs Servo plug set Quantity 10 pairs(10 male & 10 female) Usage For JR servo

Tamiya The Frog
Original tamiya frog ready to run with new re-release body, decals, tires and new bearings.  Just add batteries and its ready to drive.  Comes with older futaba radio and radio gear.

Servo Reverser
I have a bunch of these 5~6V Servo Signal Reverser Compatible for all servo

6mm X 1mm Neodymium Disc Super Strong Rare Earth N35 Magnets x 100
6mm×1mm ?Super Strong Grade N35 Neodymium Magnets ?Ni+Cu+Ni Heavy Duty Plating You get 100 magnets for $20

Spektrum DX6 Black with Receiver
I have in excellent condition transmitter. Comes with a new Turnigy lipo I just bought last week. No manual . Also comes with a brand new Lemon DSM2 6ch receiver.

AeroWorks Ultimate - ARF
DA 100 (2004) Mejzlick 28 x 10 TrueTurn aluminum spinner with lightened back plate. Hitech 5945 digital (4) on ali (2) on elev JR 8611 digital (2) on rudder Futaba high speed digital on throttle

Resin Cutting Disc with 3mm Shank for Dremel x 100
Specification: Material: Resin Color:Black Wheel Diameter: 32mm/1.26~| Wheel Thickness: 1mm/0.039~| Shank Size: 3mm Quantity: 100pcs Wheels 2pcs Shank Great for cutting wood, plastic and

102pcs 80Grit Drum Sanding Kit Fit Dremel Rotary Tools with 1/2 3/8 1/4 Inch Sanding Mandrels
Quantity: 30pcs x 1/2~| Sanding Bands Sleeves 30pcs x 1/4~| Sanding Bands Sleeves 30pcs x 3/8~| Sanding Bands Sleeves 4pcs x 1/2~| Mandrel 4pcs x 1/4~| Mandrel 4pcs x 3/8~| Mandrel

Strong Disc Magnet 12mmx1mm Rare Earth Neodymium Magnets x 100
Shape:Disc Size:Dia.12mm Thickness :1mm Material:Nd-Fe-B magnets Grade:N52 $20 for 100

136pcs Rotary Tool Accessories Bit Set
10 x Big sandpaper ring 12 x Small sandpaper ring 6 x Wool polishing wheel 1 x Wool grinding head 10 x Grinding wheel 3 x Steel wire brush 3 x Copper wire brush 3 x Nylon brush 2 x Polishing p

GT Power Capacity Lipo Battery Tester With Balance Function
Description: Brand:G.T. Power Item:Digital Battery Tester Balancer Voltage measurement range: 2-7s Lipo/Li-ion/LiFe/Nicd/NiMH Display mode: battery cell voltages, total voltage, lowest cell voltag

102pcs 80Grit Drum Sanding Kit Fit Dremel Rotary Tools with 1/2 3/8 1/4 Inch Sanding Mandrels
Quantity: 30pcs x 1/2~| Sanding Bands Sleeves 30pcs x 1/4~| Sanding Bands Sleeves 30pcs x 3/8~| Sanding Bands Sleeves 4pcs x 1/2~| Mandrel 4pcs x 1/4~| Mandrel 4pcs x 3/8~| Mandrel

AeroWorks Ultimate - ARF


G.T.Power 150A High Precision Battery Walt Meter And Power Analyzer
Brand Name G.T.Power Item Name Watt Meter and Power Analyzer Item NO. FT08 Operation Voltage 4.8V-60V Measures Range 0-150A, resolution 0.01A; 0-60V, resolution 0.01v; 0-6554W, resolution 0.1w;

TURBINE BYPASS
TURBINE BYPASS PRICE IS FOR ONE BYPASS PLUS SHIPPING

Phoenix Extra 330S
Selling my Phoenix 330 with OS .91, all servos , receiver, this is Not the red one, it is blue, cannot ship, this is for local pick up

Great Planes JU-87 Stuka
Up for sale is Reciever Ready Stuka with O.S .91 Four Stroke engine with Pitts muffler and 7 Futaba S3151 servos. Plane is in excellent condition and never crashed. Only flown few times.Just Noticed a

JR 11X 2.4Ghz - Great Radio!!
For sale is Slightly used JR 11X DSM transmitter in excellent condition. comes complete with charger and box etc. $360 Shipped USA. Thanks. Key Features: •Ultra-smooth, dual bearing sti

Top Flite Cessna 182 - 61
T/F Cessna 182, with Evolution 1.0, all servos/receiver, a 6.5 out of 10, and a real good flyer, can't ship, this is for local pickup only.




 
RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2016.  Privacy Policy
 
GET FREE RC CONTENT FOR YOUR WEBSITE

Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

Products Videos WattFlyer.com RC Classifieds

RCU5 | 54.198.90.50 | 0 | 1 | 05:55:17 PM EST | NC