Heli-Max 1Si Quad with extra battery
Here is a 1Si Quad, with camera, extra blades, micro SD card, card reader and charger. This is a complete unit with accessories. I have several of these that are returns most of them just had bad ba
O.S. Engines O.S. .75 AX
I have a Nearly new OS 75 AX engine. This came in a plane I purchased and had never been fueled or started. I broke it in and flew it 3 times but I wanted more vertical out of the plane. I replaced it
Ziroli P-51 Mustang
Full fuse(fuse is fiberglass) kit with plans, cowling, canopy and belly pan. Wood kit is made by War Bird Cutters. Robart retracts.
Will take $600.
Will not deal with Paypal.
Can be emailed a
Pilot RC 24% 73" Extra 330SC 30-35cc Red/White/Blue Carbon Fiber
I have a Pilot RC 24% 73~| Extra 330SC 30-35cc Red/White/Blue Carbon Fiber RTF. All you will need to your own Spektrum radio to bind it over. It comes with all the good stuff. DLE 35R, 7955TG servos o
Magnum XL 160A
Magnum FT-1.60 twin four stroke engine
Up for sale is a Magnum FT-1.60 twin four stroke, basically a clone of the OS Gemini twin, you know the $1100 engine. The Magnum line has been every bit as reli
Low time Saito 1.80 four stroke engine
Up[ for sale is a low time Saito 1.80 four stroke engine. Excellent condition, great compression, smooth bearings. Bought for large twin project and it has been
1958-60 Veco .35 RC engine, NEW
1958-60 Veco .35 RC engine, NEW
Vintage 1958-60 Veco .35 R/C engine new, never run!!
Up for sale is a new in box, Clarence Lee designed 1958-60 Veco .35 R/C engine. This great little engine has ne
FLY EAGLE JET BAe Hawk 1/4.5 scale
FEJ BAe Hawk 1:4 1/2
Brtish 2012 color scheme (RTF), built by Nirly professional build.
Model is ready to fly without engine. All JR 8911 servos, Power Box, EV5UA valve, 2 way valve, light syste
Fox 3.2 Gas
Fox 3.2/52cc gas engine w/BCM inverted Pitts muffler
Up for sale is a Fox Model Gas Engine 3.2
Carb. drilled and tapped for smoke. Suitable for planes 15-26 lbs. Sugg prop size: 20x12 22x8 22x10
Brison 5.8, 95cc monster gas engine
Up for sale is a Brison 5.8 (100 CC ) With an inverted pits style muffler. Comes with a CH Ignition, and a BCM or Slimline inverted muffler.
Size 5.8 ci / 95 cc
Battery charges up good,there are no broken switches.Comes with R600 receiver, charger, manual, decal sheet, etc.
Comes in original box. System is on channel 40 and both crystals are included. Price
HPI Racing Savage X lrp .30 big block
Truck is in good shape. Runs good. Has a barely broken in lrp 30 installed. Newest 2.4 edition truck with orange plates and 2.4 radio system. $300 cash.
up for sale is my new brushless addition E-revo with the up graded water proof esc , truck is like new with only a few runs on it , tried the regular esc but did not like it so up graded to the water
RC B4.2 w/ Brand New Castle ESC and 3500kv motor
This is an RC10 B4.2 that I purchased from a Team Associated sponsored driver. The package includes a TON of extra parts new in package, a-arms F&R, Dog Bone Drive shafts, CVD's, NIP aluminum suspensi
Traxxas Revo 3.3
up for sale are two 3.3 revos and one really really clean 3.3 T-maxx these have ben my shelf queens for a long time , but now its time to let go of a few running out of room for storage so her we go ,
Clod buster axle pair
It's a set of clod buster axles that I was going to use to make a crawler but lost interest and need the space. They're brand new and assembled. One differential is JB welded and the other just has sh
Axial yeti 1/8 scale
up for sale is my axil yeti 1/8 scale run 3 times on 2 cell 5000 very fast and agile climes great and very fast not sure what it would do on 2 3cell 5000 ran 3 times up and down the road , still have
DuraTrax Vendetta ST *WITH LIPO* see description
This is my Duratrax Vendetta st. It comes fully RTR. The motor has been replaced to a Hobbywing brushless motor and ESC (comes with program card). Also included is a whole lot of parts, stock and non-
Extreme Flight Yak 54 - 87"
Never been crashed, nothing wrong with it, just out of hobby. Comes with a DA50 Engine, Hitec 5945 metal gear servo for throttle, and a Futaba S9152 rudder servo, Hitec 5945 metal gear servos on eleva
32 Bling Rocket SF 200 Pro + TP4050 - 2050kv
32 Bling Rocket Receiver Ready
TP 4050 2050kv
SF 200 Pro+
Dual Rudders with dual waterproof servos
Carbon Fiber motor mount
Carbon Fiber Battery Tray
Built in drive line oiler
I hate to se
NIB DLE 111 FREE SHIPPING to US
This is a new DLE 111 twin. I am also including a custom wood mounting block as well. It was mounted on a new plane I purchased (I'm changing to a radial) but never run. I have the original box for it
XTM Racing X-Factor Brushless Crawler
Here's a XTM X factor converted to brushless. It's not fast on 2S because of the low gearing but climbs amazing no cogging at all.
Electronics include 2050kv 80a XCar setup, 1/8 buggy servo, tqi re
Traxxas E-Maxx brushless edition
Traxxas Emaxx Brushless edition for sale with upgrades and extras.
RPM A-Arms all around
RPM True Track Rear wheel set
RPM Shock Towers
Traxxas Steel D
NIB - O.S. Engines O.S. BGX-1 3500
I have a OS BGX-1 3500 engine, for sale . It is - brand new, untouched, UN RUN!, UN mounted! - and complete with ALL the goodies, decals, manual, wrench, etc., all still in their factory pac
Top Flite P-51D Mustang - 1/5 ARF
THIS IS, AN AS IS, TOP-FLITE P-51D ARF ORIGINAL, NEVER FLOWN AND IN EXTREMELY NICE CONDITION.
PLANE IS IN A (BNF) CONDITION, AS IT IS EQUIPPED WITH A FUTABA FASST R617FS RECEIVER- 7 CHANNELS.
REDUCED- SEAGULL MODELS SUPERSTAR 70" WINGSPAN 3D PLANE
im told this is a SEAGULL MODELS SUPERSTAR| BUT NOT SURE...IF YOU KNOW FOR SURE LET MEW KNOW. IN ANY CASE THIS IS ONE GREAT FLYING 3D PLANE WITH TONS OF POWER. I BELIEVE IT HAS A 160 NITRO ENGINE (Sup
REDUCED AGAIN!! DRASTICALLY REDUCED-RTF GIANT SE5-A - 80" WINGSPAN W/ 50CC GAS ENGINE
RTF GIANT SCALE SE5-A 80~| WINGSPAN....HUGE PLANE 50CC GAS ENGINE THIS PLANE IS A SHOW STOPPER AT THE FIELD.... THIS IS A WEATHERED PLANE INTENSTIONALLY SCUFFED AND MADE TO LOOK FULLY
Metal Dual Power Switch with Fuel Dot
Heavy Duty Metal Dual Power Switch with Fuel Dot for RC Airplane
ONLY 1 BLACK IN STOCK!
82.5mm, overall length
70mm, mounting holes center to center
31mm, height in ce
Kingtech Data Terminal
Brand new Kingtech/Jet Central Data Terminals
$30.00 each or $55.00 for the pair or $80.00 for all 3
Free shipping in the lower 48
PayPal accepted (no fees)
Robart Ziroli arf powered with DA 85 JR servos throughout, wing bags, tail bags, carbon two blade and three bladed prop, spectrum receiver and new A123 batteries.
Jet Central Mammoth
Brand new, never installed, Zero hour Jet Central Mammoth I Originally purchased this turbine from Jet Central last year but never got around to install it in any aircraft. Serial number JF-210-136.
GTM 1/4 scale Hanriot HD1, Engine
Up for sale is a very difficult to find Glenn Torrance 1/4 scale Hanriot HD1 kit. Also included is an OS FT-160 Twin with very little time, never flown. The kit and engine were purchased from a very r
Traxxas T-Maxx 3.3
The truck is still like brand new. The engine have been broken in, but just can't seem to get it running properly.
2 batteries for the EZ start starter
Magnum XL 160A
with a keleo muffler
AR6210 6 channel receivers (2)
Like new AR 6210 receiver with Remote satellite receiver & binding plug.
Never flown only used to set up plane sold plane buyer did not want.
Team Associated 4 X 4 RC8e
Hey Folks, - Sorry no trades - Up for sale is a Team Associated RC8 electric. - This was my first car experience. Was going to share it with the kids but found out on my first run that there is no
I have an auto start AMT 180 that came off my bobcat. I don't need it anymore as I sold the bobcat.
I everything with it and manual.
Asking $ 1000 shipped or best offer!
Power Switch w/ green LED lite HD
Power Switch with Green LED lite
Heavy Duty 22 ga wire, Universal Gold Plated connectors.
Charge port with secure closing door, and finger safety guides to prevent accidental movement of switch posi
Jet Central Rhino Kero Start
I have a Jet Central Rhino with approximately 8 HRS runtime on it, mint condition. Runs great! I had it on a KingCat but sold the airframe and don't need it right now.
Asking $ 2400.00 shipped
I'm looking for a OS 61 RFP pump or pump parts, or somewhere I can purchase from.
Irvine .46 ABC MkIII
This is an Irvine .46. Has only 3 tanks of fuel through it. It comes with standard muffler, I also have a side mount Pitts for an additional $25.00. These are great engines.
E-Flite Extra 330SC
Used E-Flite Extra 330SC. Great condition, no crashes or damage! You get everything you see except the servos. Airplane, Turnigy Park 450 motor, E-Flite ESC, aluminum spinner and prop. You will need a
OS 3820 1200 kv Motor
New in box, never installed or touched,
JCX-M6 Flight controller
I installed in in a 3d Hobby shop Velox and removed it, never took the time to learn how to set in up
Futaba MSA-10 Servo adapters
Had these installed in a 50cc pitts to enable the setup of a EagleTree Guardian
Never really used it, sold the Pitts
$42 shipped ea.
$80 both shipped
Manuals on-line : http://manuals.h
F4U Corsair 1/4 scale
Composite ARF F4U Corsair in excellent condition. Has Moki 215cc engine. Sierra landing gear. Radio equipment is Hitec digital servos. Has batteries but should be checked. Last flown in Feb 2015,
Align 3GX USB device
Align 3GX USB device $12 shipped
various lipo chargers 1s / 2s
various lipo chargers 1s / 2s
Celectra 1s $15.00
Celectra 2s $15.00
Electrifly 7.4 $15.00 each
$40 for all prices include shipping
Top Gun Aircraft F-15 ULTRA EAGLE II
Top Gun Aircraft F-15 Ultra Eagle with OS .91 VRDF engine mounted in an Byron fan unit with Spring Air retracts mounted in it. All servos are installed and only needs receiver and battery. This jet is
2 SPINERS FOR SALE TRUE TURN
FOR SALE 2 SPINERS
ONE IS A TRUE TURN
SECOND ONE DONT KNOW
BUT BOTH WORK PERFECTLY
TRUE TURN IS 4 INCHES
SECOND IS 3 1/2 INCHES
BOTH CUT FOR DLE 111
BOTH HAVE CENTER BOLT
FOR SALE 2 HITEC SERVOS
IN PERFECT WORKING ORDER
ONE HAS A BROKEN CORNER DONE ON INSTALATION
NEVER CRASH OR MISTREATED
Midwest AT-6 Texan - 1.20
This is a Midwest AT-6 kit built and is covered with fabric and almost ready to paint. Comes with aluminum cowl front ring and fiberglass cowl. The ailerons are missing and will have to be remade. The
CHANGE IN PLANS WAS GOING TO MY NEW AIRFRAME
BOUGT IT AT TOWER ON 3/13/14
HAS ABOUT 25 FLIGHTS ON IT
RUNS PERFECT NO HIKUPS
NEVER ON CRASH OR PROP STRIKE
Goldberg Super Chipmunk .60
Carl Goldberg Super Chipmunk .60 kit built with servos installed in it. The plane has operational flaps and set up for fixed gear. No wire landing gear or cowl is included. It got lost in moving.
Top Flite F4U Corsair - 2.1
I have a Top Flite Giant Scale Corsair kit for sale. The fuselage is about 85% built. I have carbon pushrods for it, versus the oe pushrods. The wing, with the exception of the spar, is untouched. The
Align T-Rex 500L Dominator
I have an align T-rex500 dominator for sale. This helicopter was originally a DFC but in December 2014, I upgraded it to dominator. all Body parts, tail servo and ESC are new. The rotor head, motor, c
NIB Spektrum/JR DS821 servos - $90
Up for sale are 4 brand new Spektrum DS821 digital servos for $90 shipped.
Never used or mounted or flown. I did test them and they are all good and quiet.
Includes all mounting hardware and 8
Sapac L39 70mm pnp
This is a pnp Sapac 70mm L39 with Hacker 70 amp esc and A30-14m v2 motor with CS 70mm fan. all hitec servos
BME 100 in excellent condition. Comes with mufflers ignition and a new Walbro carb. Also has a CH ignition with new spark plug boots.
I have for sale a nice cr01 unimog roller with a turnigy metal gear servo, axial 2.2 chisels, a 55 turn axial motor. The tires that are on it don't go with it. It's very clean. Just needs a esc and
Troy Built 50% Decathlon
Smartfli power box & regulator
2- Fromeco 4600 bats on rec
2- Fromeco 2200 bats on ignitions
Grapner smoke system
Zenoah G-62 with spring starter and bell mount
Zenoah G-62 with spring starter and bell mount
PST Jets Composite Reaction RTF
Nice PST composite reaction jet
Flies great. I have a bandit and comp arf flash so this ones not getting flown
This is a big jet, larger than my comp arf flash
Previous owner knocked landing gear o
Extreme Flight 104" Extra 300 Rx Ready DA 120
Selling an Extreme Flight 104~| Extra 300 for a friend. Every thing you see in pictures below minus receiver, and switch, Switch goes with receiver. This airplane, and everything on it was purchased n
ZLIN 50 Seagull Models
This aircraft has been out of production for a while and I will give you all the information that I have about it.
ZLIN 50 : Seagull Models ARF
Giant Scale Top Flite FW-190
As the title states, I have a Top Flite Giant Scale FW-190 with literally about six flights on it. It's in good shape with some weathering that I was messing around with and added, probably a bi
Heli-Max MX400 EP
Asking $225 with the 9C transmitter or $125 without the transmitter.
It has some aluminum and carbon fiber upgrades. It includes a lipo battery, aluminum case and some spare parts.
Their is NO charg
All (3) with Channel 60 crystal. $20 each or $50 for all (3)
Great Planes Ultra Sport 1000
I would like to buy a new, UNASSEMBELED, complete, Ultra Sport 1000 kit. I will pay by Pay Pal. If you have one for sale - please contact me.
Looking for very high quality scale wheels and rims for a 20% Tigercat. Mains are 7.25 inches in diameter and Nosegear is 5.25~| in diameter.
Here we have a new terremoto by red cat new in box call if interested 4046643113
Miniature Aircraft USA Stratus
Stratus airframe call if interested4046643113
turnagy Hal 450 size quad
A turnagy Hal 450 size quad everything for bnf nice landing gear 10 new carbon props call if interested 4046643113
Bill Hemple 1/4 Clipped wing cub
Features premium hardware, bungee gear, scale wing struts, scale cub door. Set up for DLE 35. Airframe only with cub spinner and prop.
New, never out of shop, Engine has not been started
New 55cc gas engine
all digital servos
Weight - 26 Lbs ready to fly
5 engines and parts engine
Assan 2.4 reeceivers
I'm downsizing my fleet. I have sold the planes these were in. I have use Assan receivers for 10 years in various park flyer sized airplanes, up to 60~| wingspan. the equipment has been rock solid. No
4 engines as a package
Durafly Junior BnF
I have a like new retro-style Durafly Junior Bind-n-Fly. Includes new Orange DSMX Rx with three-axis stability gyro and TP 1350 3S lipo. Foam construction. Overall dimensions are 43" W x 31"
Meister Scale FW 190 D9
Meister Fw190 D9 framed and glassed set up for Sierra mains and tail wheel (not included), built with flaps. Cowling and canopy included, all control surfaces are built and ready to cover. Plans also
Suprtiger engines 4
REDUCED! SOLO PRO 100 MICRO 3D HELI, CHEAP!!
For sale is my SOLO PRO 100 3D HELI from NINE EAGLES. It's used, flies great, and in excellent shape. For some reason, I can't seem to bind it to the TX anymore, so you'll h
TRU-TURN 3.5" P-51 STYLE SPINNER - NIP
A NIPackage TRU-TURN 3.5" DIAMETER P-51 SPINNER #3502 - 2 BLADE. Package hasn't been opened. This diameter is perfect for many kits such as the 60 size Spitfire, P-51. Req
DLE-55 side exhaust
bought new to fly in a 30% Ultimate. Plane didn't handle as well as I wanted, sold the airframe. Engine was ran less than 15 total minutes. I cut about 5/8" from the length of the exhaust pipe; n
Extreme Flight 83' MXS
83~| Extreme Flight MXS RTF. Plane is set up with DA35 with a Jtech pitts muffler, hitec 7954s on ailerons and elevators, 7950 on rudder, IBEC, carbon fiber spinner, 2 2600mah Fromeco lions, and JR
Lanier Laser 200 1/4 Scale
Price is for airframe only. This is a kit-built Laser covered with 21ST Century fabric and originally powered with a 120 size four-stroke engine/ Good condition
approx 3000 feet on reel. 150 lb test line
safety breaker on box to cut power
Long shaft starter motor. 12 volt.
Has bearing to support end of shaft
Has turn around pulley
Durafly 1100 Spitfire PNP
I selling a very nice flying Spitfire. Has the stock motor but using the 5 blade prop and Hobby King 60A ESC 4A UBEC. I flew it on a 4s 2200mah lipo and flies great. Im more of a scale flyer so 3/4 is
Byron GlasAir 1/4 Scale
Byron Original GlasAir 1/4 scale plane with new Supre Tiger 3000 glow engine installed in it. The fuselage is fiberglass and the wings, stabs, elevator, and rubber are foam covered with fiberglass clo
E-Flite DHC-2 Beaver
New in box E-Flite ARF Beaver. Includes cockpit kit, E-Flite 25 power brushless motor
P-82 Twin Mustang
THE PLANE WAS FLOWN TWICE AND LANDED WITHOUT INCIDENT. IT IS A BIT TOO FAST FOR MY LIKING. IT NEEDS SOMEONE WITH FASTER REFLEXES THAN MINE. ALL ITEMS; ENGINES, SERVOS, ETC. WERE NEW WHEN I BUILT IT.
Midwest HE-162 Salamander
This is my Midwest HE-162 Salamander I built and powered by an OS .46 VRDF engine in a Kress .40-46 fan unit with a Perry Regulator. All servos are JR but no receiver or battery. It only has four flig
New Boomerang Taurus
New Boomerang Taurus
This plane only has 2 maiden flights performed by Andy Kane
Super Eagle 120 Turbine with about 2 hours of run time
Hightec HS 5945 servos
Spring Air Mains
Pro-Series front g
winged shadow systems see how display.
Winged shadow display only,slightly used.
Composite- Arf Viper Mk2
I have a Comp-Arf Viper Jet MK2 that is NIB in the Green/Black and White scheme that I traded for and will not be building. It is in a complete and undamaged condition and includes Factory Retracts wi
Interceptor - Ducted Fan Jet - delux kit from Top Gun
New, but old, Top Gun Aircraft Interceptor - ducted fan jet kit
Originally designed for dynamax and .91 size power.
Still can be built old school with glow power -- or this would make an outstand
1 meter lengths or custom cut.
Red, in stock.
$3.99 per meter
$3.39 shipping for up to 4, 1 meter rolls
NO PAYPAL FEE!
ParkZone F4U-1A Corsair V2
$125 OBO - contact me at email@example.com or 561-351-1376
Located in Stuart, FL 34997. Willing to ship at buyers expense .
I also fly at the local fields in South Florida from Ft Laud,West Palm,
Vess 27c Prop Propeller
This is a new Vess 27c prop..Never out of the package..Not much else to say..
ParkZone P-51D Mustang
Parkzone P-51D Mustang BL - PNP. Stuart, FL 34997
$100 OBO - contact me at firstname.lastname@example.org or 561-351-1376
Located in Stuart, FL 34997. Willing to ship at buyers expense .
I also fly
One Race Old Losi XXX-SCT BND
This is a one-race old Losi XXX-SCT. It runs great but it's just not my thing. Only modification to the truck was opening up a few of the vents on the body.
For trades I'm looking for a
Traxxas Raptor New
This is a new Traxxas Raptor 2 wheel drive.Bag has never been opened...It looks similar to the slash...It comes with a 5000mah used battery..I plugged it in to verify operation in my livingroom...Work
LOT OF PLASTIC SERVOS TRAYS
For sale is a bunch of servo trays I've collected through the years. I believe they're from Futaba. The trays designed for standard sized servos. Some new, some used in excellent shap
MTW TD 75 Cans for DA 100 120 DA60 DLE 120 61
MTW TD cans
Used but excellent condition
Power Box 40/24 Champion
For sale is my Power Box 40/24 Champion system. It was used in my QQ 102 Yak 54 and this system was never involved in a crash and it offers security and redundancy for larger models. Included is the
Garage Sale Ad!!
kyosho lazer zx5 with many extra parts.
3W 106 CS Competition Series (Red Head), ignition, headers, FREE SHIPPING
For sale is my 3W 106 CS Competition Series gas twin. I had it in a QQ Yak 54 and it hauled the 28 lb plane around the sky with authority. This is one strong engine! The ~|Red Head~| Competition Se
team associated b44 buggy with many parts.
OS Engines FS-81a
For sale is one lightly used OS FS-81a. Engine has excellent compression. Bearings are quiet and smooth. Includes original box and muffler. This is a drop-in replacememt for the OS-70 four stroke.
Sig Somethin Extra 40 ARF
Hello. I have a Sig Something Extra ARF. Built and flown once. Nice flyer. Moving on to different plane now. No servos, motor, recr, batt, or switch.
Airframe only w fuel tank, pushrods motor moun
Glen Torrance Models DR1
You Will need a Engine ( had a Zenoah G26 ) Rx and Rx Battery to fly
Fly's Great for a full scale model , Just in time for summer FUN
Glen Torrance 1/4 scale DR1 , it is covered wi
New Spektrum Black DX7 Transmitter Free Shipping Last Offer 7/5 2015
New Spektrum Black DX7 Transmitter
Includes All Componets That Come In Box
Lion Battery And Charger,Neck Strap,Decals And Manual.
Took Out Of Package Adjusted Stiks To My Preferance
Jet cockpit Kit
Long time out of production! Generic cockpit! My intentions were to back pour these for resale? So many projects that I thought someone would like this for individual use or splash? This kit will fit
All Composite 120/150 Sukhoi
This Sukhoi was used as a team show performer! Has smoke system and JR servo's That I will leave in the plane as a bonus! Plane is in excellent condition with an elaborate epoxy paint job. There is a
New rolls of fluorescent Ultracote
3 rolls of 894 fluorescent Pink
1 roll 901 Neon Pink
1 roll 900 fluorescent magenta
1 roll 897 Power Pink
$85 shipped in the US for all of them, I'm not int
Sig Mayhem 3D with servos
Sig Meyhem 3d with power 1501mg metal geared servos in it. Has an engine mount in it and setup with remote glow ignitor. add your engine and receiver to fly. Pickup only in Zebulon or during the week
Great Planes Ultra Sport 1000
I am lowering the price ad i am needing to pay past due medical bills. Please no low balls or scams, I am looking to male an honest and quick sale. Great planes Ultrasport 1000. Enya 1.50 four stroke
Boomerang Jets Boomerang XL
I have reduced the price to hopefully sell this Boomerang quickly. I am trying to finish
A F15 to bring to KY Jets. Thank you for looking. Boomerang XL. 96~| long, 96~| wing span. AMT 280 ( extra tu
For Sale Vario Copra Turbine Helicopter
Hi Guys, here its For Sale this massive Bird Vario Turbine Helicopter with Vario mechanics and Jet Cat Turbine.
The Helicopter its Almost brand new , has a small rush on star port site
AeroWorks P-51 Mustang
Wing span: 86 inches
flying weight: Approx. 25 lbs
Working: Flaps, Ailerons, Elevators, Rudder, Sliding canopy, inner and outer landing gear doors, removable horizontal stabs.
Power plant: DLE 55cc
Skyshark RC Focke Wulfe 190A8 - 60
COMPLETE NIB SKYSHARK FW 190-A LASER CUT KIT. INCLUDES FW-190-A HARDWARE PACK!(Hardware, Fuel Tank, Wheels, Pushrod Tubes, etc). Box in good shape but has some hangar rash on one end.
Can be built
Up for sale is a comm lathe, brush cutter and a bunch of motor goodies.
(20) NEW REV-UP PROPS - 11 1/2 x 7 - REDUCED
A batch of (20) NEW REV-UP 11 1/2 x 7 Props. That's RIGHT, it is NOT a typo. The props are 11.5" diameter x 7" PITCH. Rev-Ups are more efficient than contemporary props of their
The Pixhawk 32-Bit Autopilot System for Autonomous Vehicles from 3D Robotics is essentially a very specialized computer that provides flight control for autonomous RC aircraft such as quadcopter
Bob Dively Skybolt
Bob Dively Skybolt NIB, complete wood kit ,plans , Fiberglass wheel pants and cowl 275.00 plus shipping Kit is 2 boxes 1-51x5x18 -17 lbs.2-12x12x12 2lbs.Can arrange local delivery within 30 mile radiu
Cressline F100 Kit With Custom dual wheel scale nose strut, 69 length,59 span .you can use any of the power packages with this kit for the build.Originally designed for dynamax fan.Classic foam cores
Hanger nine PT19
Hanger Nine Pt -19 ,With FPE 1.4 engine,Robart scale struts.Plane was totally recovered in Monokote with more true colors.Add Reciever and its ready to go .Includes transport stand Good Sunday afterno
Aquacraft VS1 & Thunder Tiger .21 Outboard
Aquacraft VS1 Competition Wood Tunnel Hull ARR and Thunder Tiger 3.5 Outboard Engine w/prop
I started putting this together and never finished. The throttle servo is not included though I will leav
Byron Christen Husky
Byron Christen Husky,with a super Tiger 3000,Strobe and landing lights.it is on floats but also includes the standard main and tail gear ready to bolt on.Add your reciever and batt pack and its
Blade 350 QX
Blade 350 QX v3 super nice condition RTF , spectrum 5 transmitter , charger, go pro mount, 2200 11.1 battery
Esm ki84 buy it from esm and you will pay over $500.00 with shipping for this plane..Wing Span:72~|Length:58.4~|Wing area:6.1 sq. ft.Wing Loading:35.1oz/sq. ft.Flying Weight:13.41lbs. *Weight Informat
Beautiful typhoon from esm, if you buy this plane from esm ypu will pay over $500.00 with shipping..Wing Span:73.5~|Length:60.9~|Wing area:6.0 sq. ft.Wing Loading:38.5oz/sq.ftFlying Weight:14.3lbs. *W
Pilots for sale. Non-living. Price 40.00 for all.
From left to right from photo.
Top half. 6"
Officer and gentlemen
Stuka ww2 airplane,just needs to finish the rudder and wheel pants.(included).plane is painted and come with the flaps servo installed. This kit was made by Royal.. real good deal for the price..I jus
Hangar 9 Extra 260 27%
Cowl needed for Hangar 9 27% Extra 260. Please indicate price with shipping to zip code 12303. Thanks!!
All JR servos and receiver
Smoke tank installed
10 out of 10
Blue Box cockpit and Pilot
$7500 RTF with Jetcat SX kero, low time
Great Planes Extra 330SC 3mm Foam 3D EP ARF
Includes everything listed below. In fair condition, a few dings. Batteries are a bit tired. But all in all a fun plane for the front yard or park.
Rimfire 28-22-1380 Outrunner Brushless
Futaba 14MZ Air
I have a 14MZ Futaba radio like new in operation that has not been used since it has returned from Futaba. I bought it used and sent the radio in for a full function check. When I got it back I put it
E-flite Carbon-Z Cub FPV Version with Autopilot
Have an almost brand new Carbon-Z Cub, flown 3 times. Has been modified for FPV and includes an RVOSD autopilot system. Has full navigation lighting and many more extras listed below. Local pickup
Fat Shark Dominator V1
Used very little. Comes with everything listed below. Have $450 invested.
Fat Shark Dominator V1
Fat Shark Dominator 5.8GHz Receiver Module
Fat Shark Dominator 2.4GHz NexwaveRF Receiver Module
Dremel (NEW) 4000/3-34 Rotary Tool
This is a NEW Dremel Model 4000/3-34 Rotary Tool. The 3-34 indicates that this tool comes with three (3) additional attachments and thirty-four (34) accessories such as sanding drums, cutters etc. It
FPVModel Ground Station
FPVModel ground station for sale. In excellent condition. Have $645 invested. Tripod not included. Everything listed below is included.
Turnigy 5000mah 3S LiPo
Fat Shark 5.8Ghz Gr
Great Planes Tracer 40
I am looking for a New In Box KIT of this plane. Reasonable price happily paid.
I would like to pay with PayPal, shipping would be to Sinton TX 78387.
My email is a Yahoo one so it would be bes
RVJET V1 RTF Never Flown
Brand new RVJET V1 never flown. Selling with everything listed below. Have $1350 invested. Wish I had more time to finish it and fly it. Should be a fun long range FPV ship. Wings are laminated a
Lipo 6s 4 packs
PULSE 6s LIPO 5000mAh 22.2V 45C - ULTRA POWER SERIES
I bought 4 of these lipo's packs On 3-14-2015
Unfortunately I am not able to run a 12s set up on my EDF jet build.
Needs to reduce it to 11 S.
Eflight Electric Retracts
EFLG520 60-120 95 degree rotating retracts that were installed in a F6F 120 size Hellcat. If you need rotating retracts for a Corsair or Hellcat or any other plane that the retracts must rotated when
X-Aircraft Stella 2 axis brushless gimbal
This is a X-Aircraft Stella gimbal, for use with a Go-Pro Hero 3 or Hero 3+. Not for Hero 4. I used it on my DJI F550 until I got a 3 axis gimbal. It is a great gimbal. All metal, super clean design,
Wing bag. 55~| long , 13~| root, 7~| at tip. In great used shape. $25.00 + $5.00 Shipping.
Brand New Don Smith T-50 BobCat
This is a Don Smith T-50 BobCat built from a Precision Cut Kits short kit. The project took four years working part time and is the second T-50 I have had from Don Smith plans. Everything in it is new
Rotopod Deluxe Training Gear
Rotopod Deluxe Helicopter training gear. For Helis up to 10 lbs. Never used new in bag. $ 35.00 + $5.00 shipping.
I have 2 of these for sale...Each comes with 2 sattelites...$75 each
Miniature Aircraft Blades
Minature Aircraft Rotosport fiberglass blades. 720mm. For .60 size heli. Never used. $55.00 + $5.00 shipping.
JR XG8 DMSS System
JR XG8 DMSS 8 channel system with telemetry.
SD memory card slot for firmware updates and model information storing.
Complete with RG831B 8 channel receiver, charger and operators manual.
HPI Super Nitro Full Option
Ok, so what I have for sale here is 1 complete full option rolling chassis w/ a brand new never run TRX 2.5 that will need an appropriate engine mount and 1 standard rolling chassis with a plethora of
Great Planes Giles G-202 - 1.2
Price is for airframe only. Plane has 73 inch wingspan and was originally flown with a Saito 180 four-stroke engine but would still fly fine with a 120.
Saito FA-325R5D Radial
Recently ( Nov Dec) checked/repaired by well known engine man . Name on request, All bearings replaced. 10 cam shaft and 2 mains. Test run by me but no more than 15 minutes total since overhaul. We
Duratrax kwik-pit super starter
This is basically a brand new nitro rc car starter. This item works great and is so much better than having to pull 10000000 times to start your car. I had it for only a few weeks when my engine blew
ALIGN T-REX 450 PLUS
What we have here is a top of the line 450 size helicopter. This is the align t-rex 450 plus. This is a flybarless heli that has top of the line electronics and is the best you can get out of all the
5060-KV300 Motor (120 equivalent)
This is a powerhouse of a motor! It is a 300 KV motor that can fly planes that weigh around 10-15+ pounds! It comes with I believe is a 120amp ESC with and external BEC. The BEC Is a must have on any
Kit built P-47 Razorback 88" 55cc
For Sale I have a beautiful kit built 88", 55cc P-47 Razorback. This was built from a Top Flite kit. I took this thing in on a trade. I don't have the room in my hangar for it, so it has to go!!
EDO OSE-1 PLANS CANOPY AND COWL. 72~| SPAN WARBIRD/SEAPLANE.
Northwest Hobby Tech A6M3 Zero
This is an all foam Zero kit, the fuse is to be sheeted inside and out, wings and tail section are all foam. Have good Canopy and Cowl. Some work was started on the wing panels to accept landing gear
Dynaflite Super Decathlon - 1.08
This is one of the nicest fabric and paint Decathlons that I have ever seen. Gas powered Brison 20. Engine runs smooth as silk and has plenty of power. Servos are Hitec 635's on the wings, same or bet
VQ Fly Baby Evolution 46, bind & fly nitro plane **Price reduced**
I am selling my VQ Fly Baby as a transmitter ready, one day flown airplane. It has a good running Evolution, a Spektrum full range receiver, all JR821 high voltage digital (way overkill) servos, Lipo
R/C Airplane Plan printing & enlarging service - $9.99
Print your Plans and 3-views - first 30 sq/ft - $10.00
I will print your Model Airplane Plans and 3-views - 30 sq/ft for $9.99 ---That's 10 linear feet of plans on 36~| paper. Don't bother tile p
Pica P-51D Mustang
NEW IN BOX Pica 1/6 scale mustang WIIL NOT SHIP , LOCAL PICKUP ONLY,
PLEASE DO NOT ASK ABOUT SHIPPING. 220.00 cash
THE kit is complete and the contents have never been
Highly modified and Detailed 30% Scale PT 17
Wingspan 116~|, fuse length 88~|, weight 39 1/2 lbs., power DLE 120. This model was modified from the original World Models ARF kit. Fuse has been painted. Cowl and wheel pants have been added. Fus
Goldberg Ultimate 10-300
This was a Carl Goldberg Kit of the Ultimate Bipe 10-300 that I purchased over 25 years ago and expertly built this model 2 years ago. I upgraded the kit with a Fiberglass Specialties Cowl and Wheel P
O.S. Engines O.S. .46 AX
Reduced Price Align T-Rex 600E Pro
Trex 600E PRO
Algin servos DS610 CYCLIC DS650 Tail
Castle Ice HV80
Castle BEC Pro
Roto Tech light Blades
(6) 3300 65C batterys (4) Pulse (2) Thunder Power
Webra Speed 120
Selling a very low time Webra 120 Speed nitro engine.
Comes with a Bisson Pitts style muffler for side mount configuration, and a very nice alloy machined engine mount.
It is a long stroke engin
Used excellent Het 700-60-2610 with new Birdi 190amp ESC 85.00 shipped Ready to mount on fan
OS 25 FSR ABC w/muffled tuned pipe
For Sale almost new OS 25 FSR ABC RC engine with stock muffler & Mac's muffled tuned pipe. This engine was installed in a 25 size low wing Commander & has less than a dozen flights on it. Engine was
Reduced Price Garage Sale
***(1) JR regulator $ 45.00
***(2) Spektrum regulators $45.00 ea
Fromeco regulator $20.00
Power Box Gemini switch regulator $20.00
Flight Power regulator $20.00
JR Gyro 370A $5
(4th of July Sale) Servo Plug Wing Harness
I make these in 22 and 26 Gauge servo wire using MPX connector
Two Plug Wing Harness
26g $10 each Sale $7
22g $13 each Sale $10
NOTE: 26g wire comes with hook clips on servo side
Irving 40 RC new in Box w/muffler
For Sale IRVING 40 RC ABC airplane engine NIB. Engine is brand new & was removed for photo only. Included with engine is the stock muffler, allen wrenches & muffler bolts. These are very sweet run
Vintage Waco bi-plane
Amazing ready to cover Waco bi-plane, never flown...a truly unique and rare find...in great condition...
For sale is the rudder servo for 40% & larger plane
Over 1000 in/oz of tork...... enough to turn any size rudder
Comes with Nelson alloy servo arm shown in pic
Aerial photography quadcopter
dys d800 quad
kde direct 4215XF motors
KDE Direct UAS55XF esc's
DJI Wookong M with V2 imu
futaba R3003sb rx
brand new pelican 1610 case
tmotor 16inch beachwood props
gimbal is not included it
Used - Brillelli 366GT 60cc Gas Engine!
Nice running engine with good compression. Comes with engine, ei unit and standoffs. CH ignition by Rcexl. Comes as seen in the picture. Shipping in the U.S. is on me. Thanks for looking!
Vortac Release Clips
I have 3 of the Bomb and Drop Tank Release Clips, NIP. 2 in each package. Price is per each package.
Vortac Bomb Release Mechanisms MK II
I have 1 of the old Vortac Release mechanism, MK II.
I've got a Tam's F-18 ready to fly with JetCat Titan SE (propane start), it was built by Tam and has all JR servos. Full armament kit included altho a few fins are broke off on a few from
1 NIP set of Vortac Bombs.
Great Planes Tiger Moth - 60
72~| Tiger moth with receiver , servos and battery switch. I believe this plane was not flown but a new build.
It does have some hanger rash but is minimum. $199.00 or best offer.
48 Inch Challenger Pro
I'm selling a 48 inch Challenger Pro ,that's brand new.The following is a list of the items you will get: hardware is Speed master (NEW) including stinger,trim tabs,6in. rutter assembly,radio box,cerv
MPI 1.0" Aluminum Servo Arm JR/Airtronics
You are purchasing a lot of 10 (ten) MPI 1.0~| servo arms new in package.
Garage Sale Ad!!
For sale: vintage playboy 70in wing,rudderbug,SBD partially assembled, 11 engines most only bench run, many other items. Inc. hundreds of magazines. Reason selling, father passed away. $950 for all. M
Thunder Tiger Raptor 50 Titan
This heli only has about 20 flights on it. It has been kept in an air conditioned room. Included is everything to fly excluding RX and TX.
Longer Tail Boom
Rear mount tail rotor serv
Fatshark Teleporter v4 First person view (FPV)goggles
hi. I recently got in to FPV flying (first person view). Bought these goggles and camera. Love it so much, that i am going to be purchasing an upgraded set for more serious flying. the goggles wor
heli max 1si quadcopter with camera
this is a heli max 1si quadcopter with extras, it has been flown very little, has extras, 3 batteries,extra blade guards, extra props,comes with all the things it came with new,has a camera for taking
TMAXX BIG BLOCK
Custom TMAXX BIG BLOCK. WILL DO COOKIES ON DEMAND
custom chasis plate
alot of aluminum
2 speed transmission
Would like to sell locally but will ship
YOU PAY FOR SHIPPING
giant stinger airframe 84 inch ws
this is a kit built,it is the air frame only .,no electronics besides a charging jack and switch , it just to big to haul for me,the wing is one piece, it had a g 62 on it and it worked very well for
5 ngk cm 6 5812 spark plugs
lots of 5 plugs,cm6 5812 ngk spark plugs shipped to your door in lower 48 $23.00 they fit dle gas engines and alot more only 2 leftI
when they are gone they are gone
New in box..still in warranty. Bought 3 month ago..614-410-5830
3MM TOC 53
3MM motor has excellent compression and is a strong runner. I was going to install on my 50cc revolver but I couldn't find a Pitts style muffle to fit it. Ended up buying a DLE 55.
The muffler was
Two, new in box... Tower sells for $170.00 each.... will let go for $125.00 each MAILED in the lower 48 only..
I Prefer a US Postal Money order but if you have to use Paypal, 3% is added to the invoi
Hitec Ultima X2 DC Charger
Brand new, never used. Tower sells for $150.00, will let go for $110.00.
Shipping is a flat $8.00 ( I will cover anything over that ) Prefer USPS Money order. Paypal OK, but add 3% to cover fee they
NIB JetCat Kero-Start plug
Still new in package (Dreamworks pkg) JetCat Kero Start plug.
Price - $175 shipped (firm) Paypal 3% extra.
Pl. PM if interested.
JR R922 X receiver DSMX
For sale JR R922x Powersafe receiver with 4 sats, 9-channel PowerSafe 2.4GHz DSMX , used only several times , looks and works like brand new.
It has original plugs, 4 satellites with wires and a s
Skymaster 1/5 F86
Skymaster F86 custom scheme with Kingtech K170 purchased new from Kingtech for this project.
-Includes sliding canopy that uses Firgelli linear actuator instead of air. The actuator makes the cano
Corsair scale tail wheel
For sale is a 1/5th scale tail wheel for Corsair. It is new in the box and includes the functioning tail hook. Very scale system.
Buyer pays shipping of $7.00
Fox .35 CL Stunt Engine
New in box.
Instructions not included.
For sale NIB Waypoint motors:
A) pair of W-E3026-10 - $40.00 + 10.00 shipping
B) pair of W-E3020-12 - $38.00 + 8.50 shipping
C) pair of W-E3014-20 - $35.50 + 8.00 shipping
FLYING FOOL CONTROL LINE AIRPLANE
Kit from the 1960's to build Flying Fool control line airplane.
BVM King Cat
Wanted - BVM KINGCAT Retracts for TAM/BVM F-18 F Super Hornet.
Spektrum DX 18 Gen 1
Spektrum DX18, Gen 1 transmitter on Mode 1. Used a few times before I got the Gen2 version. Only difference is voice prompts on Gen 2. Also have a case. I can change it back to Mode 2 if needed.
Aviation Models Yak 54 - 35%
Aviation Models (SD Models) 35% Yak 54, airplane in like new condition, never been damaged and no hangar rash. Engine is a 3W 106CS with KS Headers and 3W Cannisters. Engine has very low runtime, on
Zenoah GT-80 Twin
I've had the enigne several years. I bought it new and did run it on a test stand. Magneto with spring starter and starts and runs great. Will throw in a 2~| prop extension.
Buyer pays shipping.
Spektrum DX8, receivers, sats, Align 3GX - Canada shipping onlyONLY
ONLY SHIPPING WITHIN CANADA. PRICES ARE IN IN CANADIAN FUNDS, PLUS SHIPPING FROM WINNIPEG.
Canada Day price drop!
Have these items listed separately, but will offer them as one package deal, f
Kangke Waco-UPF7 1/7 scale
I have the kangke UPF7 it is a very nice flying bipe I have flown it with an OS-60 and then it becomes alive with the OS-90
it would also be very nice as an electric with the large hatch on the top
50cc gas extra 300L 82" wing
here is the 26% extra that kangke has
fly's super with the 50cc gas motors out there
Now Super Kraft has released the 82 inch Extra 330L. Our goal was to fulfill a market need for a large scale a
Tower Hobbies Trainer - 40
Selling my Tower Hobbies Trainer 40 ARF receiver ready plane and including A Hobbico Superstar 40 ARF as a backup frame. I bought the Tower Hobbies plane to learn on, but then moved to a Parkzone T28
JMB Pitts Muffler DLE85
New I. Box JMB Pitts Muffler for DLE85 Motor. One of the best made with bracket attached to prevent cracking due to vibration. Tested fit on my DLE85 and it was perfect, bracket fit motor mounting fla
Pitts Muffler DLE-55/DA-50/DLA56 PLUS
Brand New Pitts Mufflers
Fits, DLE50 / DLE55 / DA50 / DLA56 / GP50R, JVO 52 plus others!
$4.49 Certified shipping &n
CP-Mods C-Devil Cat
Selling a RTR CP-Mods C-Devil Cat with a Zenoah G26 modified by CP-Mods with a Hanson tune pipe. The radio is a Futuba 3pm-MX 2.4GHz and a Futuba R603FF with a 1300mah LiFe battery pack. The boat has
Zenoah G-26 Marine
Selling a Zeonah G-26 Marine engine with a Gizmo RC G-2 top end kit that has about 250ml of fuel ran through it. The engine also has an aluminum carb isolator, collet and zero drag seals. $225. Engine
Hangar 9 Taylorcraft
I have a new cowling from Fiberglass Specialties for the Hangar 9 Taylorcraft. This version was molded to fit the first generation T'Craft. The description says ~|Taylorcraft Clipped Wing ARF, 85.5~
Robart/Ziroli P47 Arf
For sale is this new never flown robart/ziroli P47 arf, it is powered with a new DA85, JR11x transmitter, 9 channel rec, duralite A123 life batteries, jr 8611a servos, has navigation lights and severa
Selling a good working JR921 2.4ghz receiver. Came with the B-25 that I just purchased on RCU. Tested works flawlessly. I fly Futaba and don't have use for it. Possible trade for Futaba 2.4ghz receive
Great Planes Ultimate Biplane 40
Brand new in the box. Stored in a controlled smoke free environment.
Wingspan: 43 in (1092 mm)
Wing Area: 742 in² (48 dm²)
Weight: 5.5-6.5 lb (2495-2950 g)
Wing Loading: 17-20 oz/ft&su
BME CAP Maniac
This plane in brand new in the box, never out of the plastic. It has been stored in a controlled, smoke free environment. It is an ARF that has a BME baseball cap in the box.
Wing Span 60"
Cox Ultimate 40 ARF
Brand New in the box. Stored in a controlled, smoke free environment. never out of the plastic or box.
Prefer LOCAL PICKUP
New Version 2 !! Fly-Model Navy Cat Jet CF + Air Retract
Red, Blue, and Unpainted (white in fuselage)
New in Version 2:
Better intensity of the airframe
Longer C/F wing tube
More C/F reinforcement areas,
e.g., extension in boom,
Promotion !! Fly-Model Extra300-LP 50cc 3D
Top quality balsa/plywood construction, perfect for both beginners and experienced pilots. Come with all hardware and accessories, engine and servo separate purchases.
Colors schemes: Yellow
Promotion!! Fly-Model Thunderbird 50cc 3D ARF
Top quality balsa/plywood construction. Come with all hardware and accessories, engine and servo separate purchases.
Wing Span: 2235mm / 88in
New !! Fly-Model SBACH342 50cc Version-2 3D ARF
V2 New Features:
Side-force generation (SFG) addition
C/F reinforcement in wings and fuselage
C/F wing/stab tubes
C/F main gear
C/F tail gear system
PU rubber w
Miles Reed Weeks Solution
I have a 70" Miles Reed Solution with a Brison 3.2. Plane was recovered 2 months ago by myself only need a few more things done don't have time. Plane is in excellent condition. Cowl needs painti
I have a Twin Hots with Twin Supertigre 45's and 8 servos.
Flies Great appox 20 flights on airplane.
Will fly on 1 engine
Questions Call 8048920446
HANGAR 9 1/4 SCALE PA-18 SUPER CUB
This is a great flying plane! It can float around in the sky but can also do huge loops. The flaps are also very effective and fun to use.
The plane comes with 7 Futaba S3305 servos, The motor is a H
Saito FA-450R3d Radial and Exhaust Ring
4.5 Cubic Inch (75cc) 3-Cylinder Ringed
Radial Dual Plug 4-Stroke Engine
both items are NEW and never run
Key Engine Features
• Over 40 pounds of sta
Great Planes JU-87 Stuka
Airframe and includes servos and all leads
Plane has never been damaged or involved in a crash
Flown at most 10 times
Any questions or concerns please do not hesitate in contacting me
Thunder Tiger Raptor 30
Was a Raptor 36 kit that kept getting upgrades till it reached where it is at now.
Thunder Tiger 46 heli motor, extended boom, 570 mm wood blades, auto rotate hub, ICG 540 gyro, Futaba GV-1, Hatori p
JetCat P-80 SE
P-80 SE Propane Start
12h 4m 27s
Was flown in my dad's Bandit ARF. Never wrecked or damaged. Very reliable engine, knock on wood....
Comes with everything t
F-86 electric ducted fan jet with 70mm edf unit. Approx. 50~| span and length. Includes speed control, electric retracts, and all servos! Has flaps and speed brake on fuse sides. Can ship UPS, FedEx,
Hangar 9 Cap 232 1/3 Scale - 3.0
zenoah 80cc 5645s all around spectrum rx bind n fly local pickup or can meet within 200mi for an extra 100$
Saito FA -270T 4 stroke cycle engine
Saito FA-270T 4 stroke cycle engine
New with receipt from 1985. Willing
To negotiate on price fair offer from
Enthusiast . Just want to see it where
It belongs. $ 339.99 orig. price .
CMP AT-6 Texan with Zenoah G-26, retracts, and servos ARF
Warbird season is here! Are you ready? I'm selling thus CMP AT-6 Texan. It includes a Zenoah G-26 gas engine, pneumatic retracts, and servos. Servos are 2-Hitec 615MG on ailerons, 1- 615MG on elevato
modelbau tornado 100
modelbau tornado with jet central 100 12 hr appx on turbine. all hitch servos 5645s on wings, 225s on tail boom
dreamworks retract and brake. fresh build ready to bind n fly with fut rx.
JetCat P-70 low time
Low time, 11 hours p70. I have it in a bandit and it runs great but I'm wanting to put a 100 in it so..
Includes turbine, ecu, gsu, pump, and 2 solenoids
Mr. Mulligan giant
This is a giant 108~| Mr. Mulligan, from a Bud Nosen kit.
This is in excellent condition,
the engine was new to this project and is a 52cc turnigy that runs perfectly.
all hitec servos,
Saito FG21 4-Stroke Gas Engine
I was originally intending to install this on a Sig 4-Star 120 but other interests got in the way of this hobby.
Engine is not only new in box but has been out of the plastic wrap twice, once upon re
S,E,5 A BYPLANE MINI 3 CHANNEL RTF WITH TWO LIPO BATTERYS AND CHARGER NEVER FLOWN NEW IN BOX FROM TOWER HOBBY
Sig Four Star - 60
Sig 4-Star 60 (Bind-n-Fly)
OS-91 Surpass 4-stroke (very low time)
Basic Jr/Spektrum digital servos
Spektrum AR7000 receiver
New 2100 mAh NiMH battery pack
3-1/4 gallons Wildcat 10% nitro fuel (se
Traxxas E-Maxx brushless
Not a typical back yard basher and it does not see mud, snow, or water. Pavement use only. Shelf queen. Hobbywing 2000KV sensored motor with 150amp esc. programmer included. FLM aluminum arms/shock to
Hangar 9 Alpha Trainer .60 - RTF
Hangar 9 Alpha 60 Trainer (Bind-n-Fly)
Basic JR/Spektrum/Futaba servos
Spektrum AR7000 receiver
New 2100 mAh NiMH battery pack
3-1/4 gallons Wildcat 10% nitro fuel (see note below)
Mintor 60cc Muffler or Header
I am looking for a new or used in excellent condition Mintor 60cc Muffler or Header. I only need one of these items, I have a new Mintor 60cc engine If you have one or know anyone that does, please
Cermark Pitts S2B
Cermark Pitts S2B with Turnigy (XYZ) 26cc gas engine with Pitts muffler. Has Hitec servos on all controls. Add reciever, batteries, fuel and fly! Will ship Greyhound (make sure there is a terminal nea
topflite t34,rtf,rimfire 80 electric setup.
Plane has a rimfire 80 motor,80 amp esc,220oz servos,2 six cell 5000mah batteries and a spektrum rx.plane is ready to fly.its a floater in first possition flaps.10 min flights,could use some scale det
FREE SHIP BEARINGS STAINLESS REAR Seal Frt OS SAITO YS TT Royal Enya KB Magnum Evo (see fitment)
FAST & FREE SHIPPING IN THE US, SHIPPED from ARIZONA Same day Shipping USPS Insured with Tracking and Delivery Confirmation.
ADD 5.95 for INTERNATIONAL Shipments
CANADA ADD $2 Shipping (1 to 3
OS HZ55 Hyper 50 YS 56SR TT REDLINE 53 HELI YS50 FX46-H FREE SHIP BEARINGS STAINLESS REAR Seal Frt
FAST & FREE SHIPPING IN THE US, SHIPPED from ARIZONA Same day Shipping USPS Insured with Tracking and Delivery Confirmation.
ADD 5.95 for INTERNATIONAL Shipments
CANADA ADD $2 Shipping (1 to 3
1/4 28 Great Planes spinner Nut Aluminum
I have this extra 1/4 28 Great Planes Aluminum spinner Nut. It is still lin the original package only 3.00 I can ship it to anywhere in the U.S.A. for 2.40 via USPS first class shipping.
FG Mitsubishi pajero BODY AND TIRES ONLY
This is a FG Mitsubishi Pajero body ONLY. this will fit a 2WD or 4WD FG chassis.It has a custom head lights and radiator grill.this body is 500 mm wheelbase .will come with aluminum rear mount and s
Ofna Nexx 8T brushlees truggy RTR
This is a ofna brushlees Nexx 8T truggy RTR . Use only ones to test . The truggy is 95% brand new. Body still has the protective film. The ESC, Motor, servo and radio show in the picture are include.
king headz front and rear hubs for Ofna Jammin /nexx 8T
These are King Headz front and rear hubs, steering ack, front and rear braces For ofna Jammin X2, X1 or Ofna nexx 8T. they are like $200.00 plus shipping parts. I will sell them for $165.00 free shipp
62 T spur gear for Ofna Jammin X2 / Ofna nexx 8T
this is a 62t Steel spur gear with diff mounts. Will up grade the 48 stock one in order to give more torque to the truggy.
Ziroli B-25 Mitchell - 101" Wingspan RTF, New DLE35's
This is a beautiful, fully built and ready to fly Ziroli B25.
- It has been built with a 3 piece wing design. The outer wing pieces come with wing bags and are designed with overlaping lips to
Great Planes SR.-22.Fiberglass body.RTF with your Tx,Rx.Wingspan 50 Has rim fire 10 motor.OBO
Looking for all or any tactic products 625 radio or receivers anylink 2 thank you have a great day
team losi DBXL up graded
New losi dbxl .
ready to run.
Has a locker spool in it so now it can run 2wd or 4wd
it has a Zenoah G26 top end installed.
the buggy and motor has 1/2 tank through it.
motor was never started whe
O.S. Engines O.S. FS-91 Surpass
TGA F-16 C Viper. All composite kit, built and painted, full set of fully tested fully functional scale gear, wheels, tires, and brakes, new fully tested turbine tube, Super HD stab actuators, JR s
F-16 Viper Fuse & molds
TGA F-16C Viper Fuse with hatches ,composite flying surfaces, retracts, gear, wheels and tires, intakes, extras of everything, and molds as shown in picture. If you want to make your own jet and
Top Gun Aircraft F-15 Ultra Eagle II Pro
Latest versions of the TGA F-15 Ultra Eagle. What is seen in pictures is what you get, plus an additional F-15 fuselage not shown all are the latest version. Tons of extras. It would be worth whil
F-111 two fuses and foam flying surfaces. One set is sheeted and has swing wing bearings installed and the pivot tubes in the stabs. All as pictured
PNP FMS P47 - never flown
never flown FMS P47 PNP. plane was built and weathered by me. just add receiver. This is the V2 with the upgraded motor. Prefer local pick up but will look into shipping cost. Text with questions/pics
JR PCM 10X Air
For sale is a perfect condition JR 10X
It still has the factory screen protector in place
Also has newer enloop battery installed
encluded are the following items :
scanselect RF DECK
AquaCraft U-18 Miss Vegas Brushless
This is a miss vegas that has been converted to brushless. The bottom was filled with foam panel and sealed in with a carbon fiber inlay to provide a flat surface for mounting the internal components.
40% TT TOC Katana
This is a very nice TT TOC Katana. Was told it was the predecessor to the Pilot Katana and Pilot parts fit. Has a very small crack in canopy, almost not noticed.
Very clean 40%. Comes with a DA150 wi
Dynamite 80 Amp Marine ESC
This esc was purchased installed but never ran the boat. It's good as new. The series battery connector was removed but never replaced with anything. The all wires are still full length.
OS Max .90 FSR
OS MAX .90 FSR NEW - NEVER USED. THE ENGINE HAS BEEN OILED ON A REGULAR BASIS AND HAS NEVER SEEN FUEL. I NO LONGER HAVE THE ORIGINAL BOX BUT HAVE THE ORIGINAL INSTRUCTIONS. COMES WITH THE MUFFLER ADAP
spektrum as3x sport reciever
This is a new in box Spektrum as3x 6 channel sport reciever.
Composite-ARF Ultra Flash RTF (Free Shipping)
Trying to consoldate into few jets. Selling my UF rtf with K100g turbine. Comes with two 2600 life for rx and 2000mah 9.9 for turbine. Early in its life the owner before belly landed in approach an
Pica/Platt FW190D9 Built & w/ Retractable Gear
This is a Pica/David Platt FW190D9 with a 65~| wingspan. It was built in the 1980/90s and not flown until the guy I bought it from (who bought it at a swap meet in FL) put a motor in it and flew it on
6D Futaba Transmitter
SELLING SINCE AM LIQUIDATING ALL OF MY 72 MEG. RADIO & receivers.
The Futaba is a 6DA on channel 48.
Have a complete setup of Corona 2.4. To convert a radio from 72 Meg. to 2.4.
Saito FA-325R5D Radial
Saito FA-325R5 in original box with all the extras! The only reason I did not rate this beautiful engine as new is because I have broken it in with 2 tanks of fuel on a test stand. Valves were check
Tamjets F-16 fuel tanks
TamJets F16 1/8th scale turbine fuel cells and bubble tank. Plane did not spool all the way up on take off and stalled and hit on the front. No damage to fuel cells.
TamJets F16 tailpipe
Turbine Tailpipe from 1/8th scale Tamjets F-16. Plane stalled on take off when the engine did not spool all the way up and settled to the ground cracking the front of the plane, but causing no other
FUTABA 9VAP with Reciever + Extras!
Condition: Used Excellent
Why Selling: Inherited and do not need
Willing to Trade: No
FUTABA 9VAP FOR SALE
NOTE: The FUTABA 9Vap Transmitter can
TamJets F16 retracts
Hangar 9 Ultra Stick Lite ARF - 120
The Ultra Stick is ready to fly, just add your receiver. It includes Saito 180 and all servos. Plane is in excellent condition never crashed. The Saito will pull the plane straight up. Cannot ship.
DLE-61cc Gas w/Electronic Ignition - NIB
1/3 Scale J3 Piper Cub
The Cub was built from plans. I do not know who did the plans. It is very well built and flies great. Just like the real one. The engine is a gas G38 older but low hours. It flies the plane very r
Got three of these for sale! Buy one, buy ALL THREE!! Never fueled, no box, manual will be emailed as PDF file.
Displacement: 2.30 cu in (38.0 cc)
Bore: 1.50 in (38.0 mm)
ESM Spitfire MK XIV-XIX Color F 72.5" Wingspan Model ARF - FIBERGLASS!!
Brand new in box ESM (Ever Soaring Models) Spitfire ! Not going to get around to building her anytime soon, so just making room in the house .... Approx shipping is around $40 to conus.
NEED PITTS STYLE MUFFLER FOR DLE-30
Tenergy 6 Volt 2000 mAh
6 volt 2000 mAh battery pack With Standard receiver plug.
AeroWorks Ultimate - ARF
Aeroworks ultimate 50cc biplane
Only 5 flights on it. No crashes or hard landing.
DLE 55cc / Pitts muffler. Carbon fiber prop / cover. Carbon fiber spinner. Only 6 tanks run through it
Da 200L, (milled cylinders), Serial # 290, Has the crank upgrade. Not the mag version. produced in black for a sponsored pilot and is stamped not mag on the case. Includes two ignitions that look new,
MPI 1.5" Aluminum Servo Arms
You are purchasing 8 (eight) new in package MPI 1.5~| Aluminum Servo Arms Single. These arms fit JR and Airtronics Servos.
RCU IS NOT WORKING PROPERLY WITH EMAILING. PLEASE CONTACT ME DIRECTLY AT: email@example.com or (661)-670-0972
Have the following:
(USED) (1) Hangar 9 Cap 232 ARF 1.20-1.50 in the box.
Composite-ARF Yak-55SP 3.3m
For sale are some Comp-Arf parts to suit 3.3 yak
Figured some one can use for a project
Parts in good condition
Super Tigre G-51 Ring/ Italian...$42.50/ SHIPPED
SUPER Tigre G-51/ Italian...$42.50 / SHIPPED/....Bench Tested...Runs, Idles Great...Very Strong motor...Good Compression, Smooth Bearings...Complete W/ Muffler, Glow-plug, Alum., Hub as pictured...P.P
HANRIOT HD 1 WW1 BIPLANE
THIS HANRIOT HD 1 WW 1 BI-PLANE IS BUILT FROM WALT MOUCHA PLANS.
WING SPAN IS 110 INCHES.
FUSELAGE LENGTH IS 75 INCHES.
POWERED BY BRISON 4.2ci/69cc ENGINE.
PLUG IN WINGS.
ALL METAL GEAR SERVOS.
Hangar 9 P-51 Miss America
Never flown electric conversion completed with battery hatch and tray. Standoffs are setup for an .90 E-Flite motor. Will include a set of FMS 1700mm P-51 struts and wheels. Modification also includes
Desert Aircraft DA-85
DA 85 with all the up dates 30 flights after updates.Runs Good. 304-982-1697
SOCKET HEAD STEEL ALLOY SCREWS , Washers & Blind Nuts
RTL FASTENERS SOCKET HEAD STEEL ALLOY SCREWS , Washers & Blind Nuts
(100) 8-32x1" Black Alloy Steel Socket Head Cap Screw..2 packs of 50pcs
(100) 8-32x1-1/4" Black Alloy Steel
L-13 Blanik 4.2m
Blanik glider add your turbine and recever and fly.15 flights 1000.00 /There is video on ona rc club youtube Thanks Phone 304-982-1697 Terry I also have a new fuse that comes with it.For extra shippin