RCUniverse Classified Ad Market Archive

Showing Listings No. 19801-20000 of 20000

   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67 
 
Great Planes Sportster .60 For Sale
Great Planes Sportster .60 for sale. Has an older OS .60 with a Perry carb on it. Has servos in it but not sure what brand. This plane probably has not flown in several years and needs to be gone t

Nitro helis
Both helis are in like new condition. Flew very little. Also have a parts heli to go with the nexus and another nexus nib. The hawk sport has an extra canopy and tail cover. Will entertain trades for

Air-tech Germany Air cylinders
Air-tech Germany Air cylinders $50.00/shipped in the USA

JetCat P-200 52 Lbs of thrust
Selling my low time P-200 (52 lbs of thrust). The turbine is a propane start and comes with everything except the battery. This P200 starts, and runs like new. I've never had any issues with this turb

Ziroli F4U Corsair with 3 cyl gas radial
I have finished a Ziroli F4U Corsair with a Saito FG 84 3 gas radial installed. The engine has been made to run strong by Ray English the Saito GURU. The model is detailed with panel lines and rivets

2 A-10's for sale
I am selling 2 Blitsworks RC A-10's. One is Ready to fly minus receiver, the other is NEW in BOX..The one in the box is the Kit form and comes with no electronics, motor, or speed controller. A 4000

Great Planes Spacewalker
Giant Scale Great Planes Space Walker RC Airplane. 82~| wingspan powered by OS 91 FS four stroke engine. Runs good. Servos all checked.ccReceiver ready. Flown very little. Very nice condition. Local

XOAR 25x10 wood prop
XOAR 25x10 Beechwood prop new in package weight is 152g

Savox SC-1267SG Servo
SAVOX SC-1267SG servo High Voltage .09 speed 277oz torque at 7.4v as shown for only $55.00

Savox SA-1283SG Servos
THREE SAVOX SA-1283SG Servos .13 speed 416oz touque 6v All Three as pictured only $210.00

Hitec HS-7954SH Servos
TWO Hitec 7954 High Voltage Servos Both Servos as Pictured only $145.00

Savox SV-1270TG HV servos
TWO SAVOX SV-1270TG HV servos High Voltage .11 speed 486oz torque at 7.4v Titanium Gear Get both servos as shown for only $125.00

Blade 450 3D
Great flying helicopter! Very clean and in excellent condition. Everything works perfect, is straight and adjusted. Some new parts are included. Additional photos available upon request. Do

ZDZ-180 B2RV-J NIB **PRICE REDUCTION**
**PRICE REDUCTION** For sale is a NIB ZDZ-180 B2RV-J stump puller! Same mounting pattern as a DA-170. Looking to get $965 shipped to the lower 48. Specs are listed below. Thanks for looking. Two st

O.S. Engines O.S. 1.60 FX Ringed
Probably the smoothest running nitro engine I've ever owned. Very powerful and reliable. I am including a BCM (Bison) Pitts style muffler with it. ($65.00 value) It's a ringed engine and has ha

Jack Stafford Models B-24 Liberator
Greetings all, I am selling my Stafford B-24 kit. The kit is complete with Plans and Instructions. Included: 4 each K&B .18 2 stroke engines (All 4 engines have had an initial break-in run perfo

BVM Bobcat Nose Retract Assembly
Looking for BVM Bobcat Nose Retrack Assembly.

NIB OS FS 120
NIB OS FS 120 4-STROKE. Never seen fuel. There is a really small sent in one of the pushrod tubes. Compression is as factory new.

Carbon-Z Cub with Floats
Thinning out the herd. For sale is my carbon-Z cub with floats. This is stock as it came from horizon hobby. it has some dings on each wing tip from running off the runway into the fence once, other t

Great Planes 2-1/4 Aluminum Spinner
Great Planes 2 1/4 Aluminum Spinner very good condition. $12.00 plus shipping

O.S. Engines O.S. FS-120 Surpass SP
Not Needed. Nib,,,never seen fuel. The ~|bottom~| half of factory box is missing. I have ordered one exhaust header to complete this engine. It will come in the box as soon as it arrives.

ZDZ 160 B2 RV
Recently picked up this ZDZ 160 B2RV aircraft engine. I just purchased my first jet, so the 40% IMAC is out. This is a great engine,  ignition module, and new headers. Selling for $500 shipped i

JR COLT 6CH 2.4GHz DMSS Retro System
COLT 6CH 2.4GHz DMSS Retro System Part Number: JRP07432 Retail:$899.99 MAP:$499.99 Overview JR - JRP07432 - COLT 6CH 2.4GHz DMSS Retro System Step back to the Future!

JR XG8 8-Ch DMSS Transmitter, Black - With RG712BX 7Ch. DMSS XBus Rx
XG8 8-Ch DMSS Transmitter, Black - With RG712BX 7Ch. DMSS XBus Rx Part Number: JRP00658 You may Call me@302-875-3602 to discuss offers Retail: MAP: $609.9

RCGF 26cc
NIB RCGF 26BM. Never seen fuel. The ignition is missing other than the crankshaft pick-up. CDI is available from https://www.rcgfusa.com/rcgf-26cc-bm-electronic-ignition for appx. $65. Other brands ma

Rare Moki NIB 360m
I ran across this beautiful motor and just had to put my hands on it. I can see my teeth in the piston skirt looking through the exhaust ports. Never been anywhere near an airplane. The foam packing h

Giant 96" Lazy Ace
War weary giant 96~| wingspan Lazy Ace for sale. Here's a video I made of my Lazy Ace in flight: https://vimeo.com/223307201 Too big to ship. Magnificent flyer. Been sitting up for a whil

Giant 96" Lazy Ace
War weary giant 96~| wingspan Lazy Ace for sale. https://vimeo.com/223307201 Too big to ship. Magnificent flyer. Been sitting up for a while. Should be gone over by an experienced builder

Mounts for Satellite rx's
I have over 100 mounts for satellite rx's. Can be used to mount other things as well. Two different types. One type is a plastic mounting base with self stick pad on the back of it. The other type is

Servo Extensions Galore
I have 95 servo extensions for sale. They have JR / Hitec plugs on them. These are the good ones.... most of them are gold plated, 22ga from Air Wild Hobbies. A few are smaller gauge (lighter) for sma

Servo Plugs and Wire
I have a bunch of assorted servo plugs and wires for sale. There are: 2- 55~| wires with female plugs on one end 2- 36~| wires with male plugs on one end 2- 32~| wires with female plugs on one end

Airplane Holders
I have 2 of these airplane holders left to sell for just $15 each. These will hold your plane at the stab while you start the engine. It will probably cost at least $25 to ship one of these, so I do

Top Flite Precision Magnetic Balancer
Top Flite Precision Magnetic Balancer Balance props, wheels, spinners and more — with accuracy never before possible! Airplane and boat props, car wheels and tires, clutch bells, ducted fan jet roto

Castle Link USB Programming Adapter
Castle Creations Castle Link USB Programming Adapter, used twice. Price is $16 plus $4 shipping. Please add $1 for Paypal payments to cover the fees. Thanks for looking, Jim

1/72 Fletcher Class Destroyer DD-557
1/72 Scale USS Johnston 557 Customized from AquaCraft complete with: 1. BECC cloth flags & Vinyl Decals. 2. DURATRAX BEC 128amp ESC 3. (3) 3000 Mah BATTERIES W/DEANS PLUGS. 4. RAM Bilge

Top fight giant zero
For sale new top flight zero Never flown, all components new. DLE 55R with 22/8 xoar prop. Rorbart air retracts, All new hitec servos, spectrum 9 channel receiver ,farnaco batteries 5200 rec

Top Dawg Aviation Canopy
I am looking for a canopy for the 88 Inch Gas Top Dawg Aviation 540. Mine is yellow but will take any color.

World Models Piper J-3 - 1/4 Scale - NEW in BOX
New in Box, World Models 1/4 Scale J-3 Piper Cub Plane was recently purchased from World Models. Sudden change in plans resulting in sale: my loss, your gain. $349.00 Buyer pays shipping, OR lo

Dromida drone
Comes with remote, battery, charger and extra set of props and parts needed The Frame is brand new Comes with new props Needs one new motor 239-776-9544

Goldberg Piper Cub anniversary edition Electric with landing gear and Floats
Electric anniversary edition Goldberg Cub Has .50 electric engine running 3s setup Ready to fly with your receiver and lipo battery Comes with floats and extra spare landing gear Cub Wingspa

E-Flite Blade CX 4
This has been flown a few times and body cover is slightly cracked from a hard landing I think it will need a new set of blades 239-776-9544 This is the Blade CX4 Micro Coaxial Ready-To-Fly Elect

Fr sky 9ch 2.4
New in the boxFrSky L9R long range receiver 2.4ghz L9R receivers boast reception sensitivity that doubles the range of existing FrSky X Series receivers. The L9R supports 9 standard servo outputs a

Futaba R617FS 2.4
Used Futaba R617FS 2.4ghz Fasst RC airplane/helicopter receiver. Will work with any Futaba Fasst System. SPECS: Size: 1.6 x 1.1 x .35~| (40 x 27 x 9mm) Power Requirement: 4.8 - 6V Curre

Pilot Extra 330SC- 35%
35% Pilot Extra 330SC DA 120cc, DA Headers with Dual ProFlow canisters, Mejzlik 29 x 9 Carbon Fiber Prop w/spinner 3 – MKS 599 servos Rudder, Elevator, 1 – MKS High Speed Servo Throttle, 4 – HS-

SAITO FG-60R3 Plus keleo Exhaust


Futaba S9405 Servos $45 each (7 available) New installed but never flown in Hangar 9 SBach
Futaba S9405 Servos - NEW installed but never flown in Hangar 9 sBach $45 each. I have seven available. For additional info, you can email your phone number or call 201-214-6191

JetCat SPT5 Turbo Prop
Like new Turbo Prop engine, Engine was complete gone through, all parts replaced new from factory, please look at receipt. Engine sold as is, all sales final!

Moki 250cc Radial
MOKI 250cc Radial Factory Refurbished Guaranteed Perfect! Factory setup and not ran since return $3200 includes shipping anywhere in US (Will ship worldwide!)

Crimper and 20 pairs of Servo Ends Fut/JR
You get a crimper and 10 Female ends and 10 Male JR Ends and 10 Male Futaba Ends So you can pick which ones you want to use Perfect for servo lead connectors and some other RC crimp connectors

Polyethylene Heat Shrink Tubing with box x 700 pcs
You get 8 different sizes in different colors and all comes in a plastic case From 1mm to 14mm sizes 700 pieces

Tiger cat
Need. A. Tiger. Cat. Esm. Or. And. Big. One

DLA 64 cc Twin Cylinder
DLA 64 cc Twin Cylinder ~|Boxer~| Gas Engine HP: 7.2 @ 8,500 rpm Idle: ~ 1,400 rpm Pull: 41.8 lbs @ 300 ft Altitude Weight: 57.1 oz Engine, 2.3 oz Muffler, 6.4 oz Ignition Prop: 22 x 10, 23

Hobbico Accu-Cycle charger
Used in excellent shape Hobbico Charger. See full details at http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEYD4&P=FR&atrkid=V3ADW3A24148B_10642245165_pla-296402450811__36556522365_g_c_pla_w

DLE 222cc 4-Cylinder
Factory Run Only (NEW) Specifications: (pulled from http://www.dle-engines.com/dleg0222.html) Stock Number: DLEG0222 Displacement: 13.6 cu in (222.5 cc) Bore: 1.77 in (45 mm) Stroke: 1.38 in

Saito 125 Mounted in Hangar 9 sbach w/lightend spinner 18-5 Prop & Remote Glow Driver NEW
Saito 125 Engine is brand new mounted in Hangar 9 sbach.  Was never started or seen fuel (lists for $375.00).  Selling with lightend spinner 18-5 Prop and Remote Glow Driver -  $325.00

YS61S long stroke
Up for sale used YS61S long stroke engine, picked this engine up from a club member about a year ago have bench run it runs great. includes a NIP OS8 glow plug,and check valve. No header or pipe in

3W 170 Headers - like new - 1 flight on them
3W 170 Headers - Like NEW - one (1) flight on them. 3.5~| drop 4~| length

Futaba Switch Harness w/Charge Plug Futaba J
NEW Futaba Switch Harness w/Charge Plug Futaba J $6.00 PLUS POSTAGE EMAIL ME FOR PHOTOS

Pro Heavy Duty Futaba J Servo Y Harness Connectors
(2) Pro Heavy Duty Futaba J Servo Y Harness Connectors. (24 inch.) Retails $12.00 each SAVE YOURSELF SOME MONEY YOURS FOR $15.00 Plus Postage. Email me for Photos

Futaba Servo Extension
This is a Aileron Servo Extension with Futaba J Connectors. This extension goes between the receiver and the aileron servo to make the wire longer. On one end of the wire is a male ~|J~| connector a

BVM Bandit
Up for sale is my well taken care of, but flown BVM Bandit. This is the original Mk.I model, and not the MkII where they changed the wing mounting system. I purchased this about 5 years ago, with o

Jet Stream 888
Used twice for tune up. Comes rtr minus battery. No damage at all! Buyer pays shipping. One owner (me) Will send pics upon request. Having problems loading here. Runs 50mph out the box pro

Roban Superscale Bell 407 (700 size)
PRICE DROP! From 1350.00 to 1200.00 This is a Roban Bell 407 (700) size prepainted kit. You will need to add your electronics to the aircraft. Includes scale lighting, landing gear, function doo

O.S. Engines O.S. .55 AX FREE SHIPPING
New in Box. Never been out.......... Call or TEXT Sherwood........ 270-784-7771 or email Sherwood@Sherwoodsguns.com..... FREE SHIPPING

World Models Cub - 1/3 PARTS
I have a set of wings and elevator for the world model 1/3 scale clip wing J3 cub. wing tips are scuffed up need covering but no wood is damaged. 100.00 you pick up will not ship. Call Dan with ques

Spektrum DX6i w/ 5 RX trade for Taranis
used dx6i with 5 receivers 2 orange 1 lemon with satellite and 2 spektrum 1 with satellite. looking to trade for a taranis.

Powerful RC plane engine starter with battery - NEW - Complete and ready to use
12-18 volt 6-1 gear reduction starter w/3cell LiPo and 2 inserts (one of each size). We deliver the starter with both inserts - which works on most spinners. Much lighter and eaiser to manage th

Vario Hughes 500 - Turbine
Gday guys - for sale is the rare Turbine Hughes 500 ready to fly. JetCat PHT3 Turbine rotor disc Ø 1 680 mm take-off weight 12 kg Specification of the kit scale 1 : 4,5 height 630 mm length 1

Fly eagle mig 29
Hello up for sale is my flyeagle mig 29 it's prehoneycomb it has savox servos for the elevators all other servos are hitec 7955 also has spectrum power box interarco uat all you need to do is add your

T One Models T1
Selling new T1 scheme is Red /Black. options/equip. Incl.   Electric gear/brake upgrade   Tams pipe   Split fuel/smoke tank upgrade   Complete pre made wire harness   Fa

Hangar 9 Extra 330S ARF
For Sale 1/3 scale Hangar 9 Extra 330S This plane is 3D capable 97 in wingspan, 83 in length Powered by Zenoah 80 CC Twin Gas Engine JR DS 8611 servos on control surfaces - total of 8 JR NES 537

Hangar 9 Edge 540 (1.20)
For sale is a Hangar 9 27% Edge 540 This is a great flying aerobatic airplane. Powered by a Saito 180 four stroke. 78 inch wingspan Throttle JR-417 Ailerons- 2 es JR ST125 MG Elevators 2 each J

Seagull Edge 540 .60
For sale is a 60 size Seagull edge 540 This plane has a wingspan just under 64 inches. It is powered by an OS 91FX two stroke engine with less than a gallon of fuel run through it. 2 ea JR DS 537 o

Kyosho Calmato 60 Sports
For Sale Is a Kyosho Calmato9 Sports 60 Evolution 61 two stroke 72 inch wingspan Throttle JR DS 821 Elevator JR DS 821 Rudder JR DS821 Ailerons 2 each JR ST47BB. No Crash Damage Nice Flying

JR XP8103DT PCM
I've decided to sell this transmitter that I used for my foamies since I have everything programmed in my Futaba radio now. This JR 8103 works as it should, but it doesn't look good on the back. A few

Hangar 9 Cessna 182 Skylane - 150
Cessna 182 Skylane Remote Control Airplane by Hangar 9 This is a large airplane with a 94 inch wingspan It is powered by a Saito 150 Golden Knight 4 stroke engine. It has functioning flaps, a scale

Top Flite P-40E Warhawk - 60
p-40 from top flite completely assembled and covered in fiberglass ( ailerons, rudder, elevators, covered in solartex) the canopy and cockpit are from p-40 arf. asking :$ 150 obo will not

ZDZ Super 80 RV-J
Hi, This is an excellent engine... almost brand new... only run twice on the bench to make sure all was OK ... and it is...!! It's the SUPER ZDZ 80 RV-J engine... with the black head. Some flye

Top Flite T-34B Mentor - 61
i have this top flite t34 mentor v tail used but in excellent condition, almost ready to fly. totally assembled and covered in fiberglass, painted with csr paint + clear gloss it does not have fla

Hangar 9 Extra 260 27%
Hi, This is a great flying plane... and has wonderful equipment... and is quick... The engine is a DA 50 with stock side pipe and just starts and runs without a problem. I use Redline 40:1 for

3D Hobby shop 75 Extra
Brand new in box Yellow/Black 75 extra

piper pawnee 96"ws
piper pawnee texas rc 96~| ws project never crashed hatch and canopy cover with fiberglass. it needs to be finished, i dont have cowling, has some servos, i also have landing gear and wing struts, thi

Spektrum AR12120 Power Safe Receiver
I have two AR12120 receivers that were in Jets and are no longer needed. The battery connectors have been changed to T-Connectors so they matched my batteries. The pictured receiver has the anti-cha

100pcs 1/8 Inch Mandrel Fiberglass Reinforced Cut Off Wheel for Dremel
The cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Great for contractors and the home hobbyist. Fits Dremel Craftsman Chica

Brand new in box RC10B64D team kit
Hello all. Up for sale is a brand new team associated RC10B64D team kit. Never opened. Purchased as a spare kit but never got to it. Comes as if you purchased from local hobby store or online. Pur

Top Flite F4U Corsair - 61 parts


tricycle robart
robart set in good condition $85

top flite p-51 1/5 tail and main retract
top flite p51 1/5 retract tail robart main is aerowork with robart struts used in good condition $200 obo

Airworld GEE BEE R3
What you are buying: Airworld Gee Bee R3 composite completed model. Includes composite spinner, stainless steel flying wires, extra metric cotter pins and clevis pins. No radio gear, fuel tank or

1/4 oz stick weights x 48
Have a few of these. New You get 6 sticks of eight 1/4oz weights

Skymaster Large BAe Hawk 1/3.65
Skymaster 1/3.65 Large Hawk 100 NEW UNBUILT Wings still in box. Everything that comes from the factory. No work done. Customer went in a different direction so was acquired by FlightWerkz.

stick fusalage or set of plans wanted
I have a wing set from a 1/3 scale Stearman that is 85 in. with a cord of 15.5 in. I want to mount it on a stick type fuselage. The fuselage has to be from a 90 to a 120 size plane.

Giant Scale Planes Staudacher GS300 - 90
NIB box opened for inspection

SCALE DLE 120 Hellcat Exhaust
I had this scale Mufflers made for my Ziroli Hellcat. Unfortunately I lost the plane during the fish flight on take off. I decided not to rebuild the plane opting instead to build an enlarged version

DLE 120
Im selling this darn near new DLE 120. I lost the plane on the 5th flight on takeoff. This engine is from broken in. There is a small broken chip on the underside fin and a ding on another on the unde

Saito flex exhaust tubes
New, unused Saito flex exhaust tubes for a FG-33r3 radial. May fit other applications. No longer needed. free shipping

Miles Reed Weeks Solution Bi-Plane
Built from Reed plans a ~74~| Weeks Solution Biplane. Comes with what I believe is a 4.2 Sachs with electronic ignition. I will not say this for sure other than the props I found for it were a 24/10

Two Great Planes Fuel Filler Valves and Fuel Filter
This is two of the Great Planes Fuel Filler Valves and one of Great Planes Fuel Filter. They are all three NEW and still in their original package. Great Planes Retail Price on the three items is $35

Blade theory W with FPV (2) and fatshark headset (2)
Much like video games- us oldsters can't compete!! So  as you can see I got all the best and tried but sadly gave up quickly. Everything is like new, can't even see grass stains on the bottom o

30cc Funtana Pro Stick Built Kit by Modelbau (FINAL Price Reduction)
Final Price Reduction. $600 30cc Funtana Pro Stick Built, Kit by Modelbau RTF Note: This plane has NEVER been Flown and the Engine has NOT been Started. Airframe: Fuselage, Removable Wings

Final Garage Sale Ad (Updated)
Items are New or Light Used (LU) Buy ALL Remaining Items $50 Any 2 Items $10 Any 3 Items $15 Any 4 Items $20 Note: I PAY Shipping anywhere in the Continental USA. - Shown in Pic Spra

TamJets F-18F
I'm going to sell my TAM/BVM F-18F ready to fly or I will pull out whatever gear you don't need. This plane has ten flights on it and it flies great. I have a Jetcat 180 RX on it with only 1hr 58 M

Pilot RC 29% Sbach 342 Custom Green Livery RTF ELECTRIC
Pilot RC 29%Sbach RTF ELECTRIC $1000 All JR 8411 (4) Rudder is JR 8711 JR 9 Channel power safe dsm2 rx 2 glacier 2s 2100 life rx packs only 3 flights 2 glacier 6s 6000 30c packs only 10 flight

O.S. Engines O.S. .75 AX


JetCat P-120SE, LOW Time, Kero Start
JetCat P120SE, Kero start, serial #2558, only 22 minutes on ECU, includes everything in pics except GSU. It came on a like new KingCat I bought. This turbine was purchsed originally in 2008 a

Ace Seamaster 40 built from KIT w/OS 50SX -RTF
Ace Seamaster 40 recently built from the kit (not ARF). The airplane has not been flown but is ready to fly. Includes OS Max 50 SX Engine, Switch Glo Pro Remote glow driver, 2500 NiMh 6.0 Volt Receive

Hobbico Accu-Cycle Elite
Hobbico Accu-Cycle Elite battery cycler and charger. Excellent condition ready to use. Buyer to pay shipping and handling. If pay pal is used please add 4% to the price. Asking $65.00.

EME 30-35cc Starter
I have for sale a new EME Auto starter with a 100amp electric switch with XT90 connectors, a new Turnigy 2200mah 3s 20c lipo with XT60 connectors, a new HD switch harness with built in charge jack XT6

Giant Scale Planes Staudacher GS300 - 90
NIB only taken out to inspect

RAM Engine speed Control
For sale brand new RAM Cruise Control unit. Can be used to control the air speed of you Jet plane from the ground. Buyer to pay shipping and handling. If pay pal is used please add 4% to the price. P

Hangar 9 Extra 330S airframe only
New assembled Hanger-9 33% Extra 330S Not much to say about the plane except that it is new never flown............ SELLING THE AIRFRAME ONLY............. $575.00 WILL NOT SHIP THIS IS A LA

UP-4 valve
UP-4 valve:  additional gear door valve such as on the B-25. list: $78, sell for $45 plus $7.15 USPS priority box for shipping. sam parfitt samparfitt@fuse.net

Super Tigre G-2300 Ring NIB
Hello Super Tigre fans. If you have a NIB Super Tigre G2300 for sale, I'd be interested in hearing from you. Please PM me with your best offer, including shipment to France. Payment as you lik

Jet Hangar Hobbies F-86 Sabre
The Jet Hangar International F-86F Sabre/FJ-2/3 Fury is a true ducted fan trainer. This kit provides a simple to build and easy to fly trainer type ducted fan aircraft while still maintaining the scal

Micro Mini Hand Drill with Chuck and 20pcs 0.3-1.6mm Straight Shank Twist Drill Bits
Have a few Material: Steel Color: Silver Drills Length: Approx. 2.1-4.3cm/0.82~|-1.69~| Drills Size: 0.3mm, 0.35mm, 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm, 0.65mm, 0.7mm, 0.75mm, 0.8mm, 0.85mm,

Eleven Hobby T-28D PNP FREE SHIPPING in CONUS
I have for sale a very nice clean looking T-28 that I repainted. All painted with rattle can spray paint from Home Depot. Has vinyl from Callie Graphics. Never been crashed. Plane still looks new. Sti

ProBoat BlackJack 9inch .
Used in excellent condition.. Only used it a few times in a swimming pool.. Comes with Radio, boat,battery, charger, manual and boat stand.. Added the team losi decals to match my losi mini T truck..

Yellow Aircraft P-38 Lightning Landing Gear/parts
Wondering if anyone has gear for a Yellow P-38 kicking around. I broke a trunnion on a main gear yesterday. I only need a trunnion, so damaged gear/parts gear are fine. Please PM, or email mikeandjean

Balsa USA Sopwith Pup - 1/4
Sopwith pup with zenoah 20cc . Built by a master builder and ama member 001 . Comes complete and ready to fly, all servos and spectrum receiver , electronic ignition. May trade for something unique or

Spring loaded canopy locks x 10
Spring loaded canopy lock. Great for canopy, battery compartment or hatch. Locking shaft protrudes 12mm Lock mounting area: 15x26mm

Flightline 1200mm Bearcat PNP with Retractable tail wheel
This plane only has 3 flights on it. Two from me and when I sold to fly friend , he didnt fly it for months . When he did , you had a hard landing and ripped one gear out. I got the plane back in a tr

Sig Citabria - 35
I had this built many year's ago and never flew it. Never got the O.S. 46 FX dialed in. Had a bad back and got tired of taking cowling off and on. Sold to a business to hang and display it. Bought it

Hangar 9 P-51D ARF Plastic parts HAN503512
I'm looking for the Hangar 9 P-51D part number HAN503512 Plastic parts. I have two kits but looking for the plastic wing and fuselage parts to complete the P-51 I've been assembling buying one part at

42% Hyperlite Slick
Need to make some room. Selling my 42% Slick Hyperlite. Custom built and covered by the one and only Mark Boguszewski. Absolute perfection!!!! Powered by a 3W 110 Competition Series Engine on stock ex

Stinson Reliant
Here is a beautiful Stinson Reliant. It has a evolution .60 engine. This plane has never been damaged or abused. Only a few flights. No tears or rips in covering. It has a 68~| wingspan. RTF, just add

DLE 120
This engine is low time but has new pistons, rings, and cylinders. I have not run it since overhaul. That's so you can break it in the way you want to. The reason for overhaul is that I used after-

E-Flite Blade 400 3D
500 size Blade Helicopters all RTF condition, never crashed few flights on them

B17G Flying Fortress 10'2"
I built this B17G for competition, it is detailed almost to the max. It is 10'2~|, built from Bob Holman plans. It has flaps and Likes electric retracts. All of the lights and all three turrets w

3W 3D Prop 31.5x8-14 for 150cc-170cc
I am selling my 3W 3D carbon fiber propeller (31.5x8-14). These are expertly matched to the 3W150-170cc engines, and they work great for IMAC and for 3D flying. Here is a link that shows the specs of

Holman/Meider FW 190 D-9
Scratch built fuse and Holman foam wing build up. Balsa construction fuse, tailplane, cowl, custom fiberglass D-9 hood and Holman wing. Has custom Century Jet mains, and Sierra retracting tail whe

Hawker Nimrod 74"WS
Hawker Nimrod Scratch built and modified from Chris Gold's Fury Plans. Balsa construction. Fuse half fiberglassed and painted. Back half of fuse, tailplane, control surfaces and wing covered

HPI SAVAGE MODDED FLM,RPM,STS.30
THIS IS BEEN SITTING ON THE SHELF AND ITS TIME TO LET IT GO I JUST LIKE MY BOATS BETTER IT A HPI SAVAGE IT HAS A FASTLANE MACHINE CHASSIS AND MOTOR MOUNT RPM ARMS ANS A STS .30 RICK BLAKE MODDED MOTOR

500 goblin RTF
Goblin 500 RTF excellent condition V-bar system on it, 6 cells setup.

700 Goblin 12 cells setup
Beatiful 700 size electric Goblin about 10 flights on it.

Helion INVICTUS 10MT
Purchased this vehicle brand new in box from Hobby Town. Son only ran it a few times. It is in PERFECT/ALMOST BRAND NEW CONDITION! IN THE ORIGINAL BOX! Would make a perfect Birthday or Christmas G

Align T-Rex 600


3'' Metal Track platform
HANDMADE in the U.S.A. By someone who cares!!! Durable tracked robotics platform, great for beginners and advanced hobbyist. T66 aluminum frame, lynxmotion 3~| track system. 120 rpm Gearhead torque mo

PRICE DROP!! Like new Magnum .61 xl two stroke
I HAVE DROPPED THE PRICE DOWN TO $45 FROM $55. DON'T MISS THIS ONE.Offering for sale, my like-new Mag.61 two stroke with muffler. This power house is really clean, inside and out. Great compression, s

Robart/Ziroli G.S. Stuka struts
Giant scale struts for a Ziroli Stuka. I had planned on using them in G.S. Macchi 202 as retract struts. doing a new project. Robart price; $201.00 Asking $140.00

Brand New O.S. Engines O.S. FS-70 II Surpass
For Sale is an OS FS 70S-II Surpass 4 Stroke Model 34700 Brand New In Box. Never mounted or run. Perfect condition. Comes with manual and all the paperwork. Very nice engine. $175 + 15 shipping Priori

POWERBOX POWERPAK 2.5X2 ECO NEW-IN-BOX
New-In-Box Powerbox PowerPak 2.5x2 Eco with built is cell balancer and mount. Assembled using the latest generation of high-current Li-Ion batteries Output voltages: 8.4 V For use as receiver pow

Hangar 9 P-51D ARF
box has been opened, parts never out of box, part still in sealed plastic bag $195.00 + shipping. MFG's link http://www.hangar-9.com/Products/Default.aspx?ProdId=HAN2375

Hanger9 F4U-1 Corsair
Older Arf 60 size Hanger 9 F4U Corsair , has a new cowl..Has some minor hanger rash . servos in the wing and fuse , also has retracts . Local pickup only, thanks

DA60
Perfect condition, barely used, less than a gallon through it, DA60. Includes ignition and pitts style muffler. Check out the pictures. $500 which includes shipping to Cont. US and Paypal fee. No

"Expert" TX/RX charger high performance trickle for Futaba
NEW-IN-BOX ~|EXPERT~| high performance trickle chargers for FUTABA batteries.  With 100mA output they charge twice as fast as the older 50mA FUTABA wall warts.  MODEL EXRA420 (FUTABA), ORI

Shoestring by Great Planes
Shoestring racer by Great Planes. Fuselage is fiberglass. Includes ESC, electric motor (Scorpion), servos, and 4 battery packs. It runs on 2 battery packs (6 S). Receiver is not included. This

Blade 130X Red Bull BO-105
I bought this a few years ago, only flown 3 times, is BNF mint condition. open to offers. MAKE OFFER.....

2 Forza 450 with 3 blade heads
I am JR dealer, these have been sitting in my office for over a year. the green one has been test hovered and the Orange one has been flown a few times. I am a scale guy so these have not seen any ha

Garage Sale Ad!! - OS 61 SF/RF PARTS - NEW
HERE ARE A GROUP OF BRAND NEW PARTS FOR THE OS 61 SF and RF ENGINES. The prices listed here are for EACH unit and came right off Tower invoices and are what the parts cost me when I bought them just

Ledgend P51 96" ws zdz 80
Great looking p51 with composite fuse and built up wings. ZDZ 80 motor and runs strong. Sliding canopy with 4 blade prop. Maiden it few weeks ago and had landing and repair the retract area with stron

Team Losi Eight-E 3.0
This is a great condition 8ight E 3.0 rtf with everything pictured. Comes with new set of tires and 4s 5000 lipo. No rx or tx

Duralite Power system
This is in great condition with switch

Freewing F14 +tons of parts
This is the twin 80mm Freewing F14 with tons of extra parts and 2 sets of 6s lipo pack. I got it awhile ago but never got around to fly it. Too busy with turbines. It was in a belly landing which sc

Great Planes Reactor Biplane .61 GP/EP
REACTOR BIPLANE FUTABA 3152 ALL AROUND YS 91 ENGINE RUNS ON 30% PLANE IS FAST AND WILL 3D WELL WILL INCLUDED 1 NEW AND 1/3 GALLON OF FUEL LOCAL PICK UP NO SHIPPING

Byron Originals F-20 Tigershark kit
Looking for a F-20 kit Must be able to ship Sorry no PayPal

PAU Extra 40%
pau extra rtf minus receivers included if needed, zdz180 with proflow cans, biela 32-12 prop which imo is perfect for imac, including a biela variable pitch prop 31.5x8x14 which is excellent for 3d

Extreme Flight Edge 540 EXP
EXTREME FLIGHT 60" EDGE 60" edge with their power combo option, rft minus receiver, hitec 5245's on all surfaces, 3 glacier 6S 3300mah batteries, my style of flying i was safely getting a

Wing Manufacturing P-38 Lightning - 40
Hey guys, This is a Wing Mfg "short" kit that is NIB.  The kit is in excellent new condition, builds into a 70" wingspan airframe.  Everything is in the box, hardware bags ar

Yellow Aircraft F-14 Tomcat - 82
F-14A Tomcat Yellow Aircraft. Working Spoilers, Elevons and Wing Flaps and Rudders.  Custom made Swing Wing Actuator. Maiden Flight Video: https://www.youtube.com/watch?v=y85aXxMTJw4 SPECS:

carf eurofighter canopy
Hi to all I'm looking for the carf eurofighter canopy so please if you have one contact me thanks so much for looking.

Yuneec Typhoon H
Have this nice lightly used 4k drone for sale .this drone was used only ones maybe for five flights to recover jet from a very tall corn field about 3/4 mile from a flying field.

Bvm twin turbine power rafale
Hi I'm selling my bvm rafale with two super eagle for power or just turbine ready ,recently replaced retracts cylinders and some other parts from bvm with remote drop external tanks and lights + I hav

jetjoe 1400 new inconel burner
Have this brand new and new style burner for jj1400 so if you have one burned or deformed this is what you need to make the turbine work again thanks.

Garage Sale Ad!! PowerBox equipment
For sale are items that are new or lightly used ( maybe 2-4 flights on them) Most of the original packages are gone, the prices reflect used items, but you are buying as good as new products. Po

CORTEX
price includes shipping it was in the airplane for a couple of fights but it`s not for me any questions please ask Shawn

Balsa USA S.E. 5a
BALSA S.E.5A : Smithsonian quality. Built exactly from an American plane shown in the photo. Bought this plane 4 years ago, put on my bench for show and never flown. Here's what I know. Covered

WIRE WHEELS
WIRE WHEELS : 4 and 1/4~| New. Proctor wheels distributed by E.B Wire Wheels, years back. $70 plus $10 shipping. Thanks for looking.

Prather Prop Pitch Gauge
Used Complete Prather Prop pitch gauge .

BVM Super Bandit 3 Main NEW Struts
BVM SUPER BANDIT 3 Main Struts That are NEW!!! Retail Price $315

Sig Piper J-3 Cub 1/5 NIB kit
I have for sale a new in box Sig 1/5 scale Cub kit. It's still factory sealed. This is all laser cut. Asking $190 plus shipping. Would prefer a local pickup. US Postal Service money order only. No Pay

Yellow Aircraft F-22 Raptor
I have a yellow aircraft f22 for sale, its in decent shape for its age, it lost a gear door in flight and I have not replaced it, the paint needs work, its not bad just not good. the plane fly's gr

Jet legend yak 130 1/4 scale twin turbine
This is the jet legend yak 130, its set up for twin turbines. I bought this plane because I wanted something large and reliable and I was not dissapointed, with the amount of money that goes into

Kingtech K100
Nice strong motor, reliable and low hours, if you interested I will provide more information. I can take any form of payment including credit cards, there will be a 3% charge for credit cards or pa

Composite-ARF Yak-55SP 2.6m Landing Gear
This AD is for the landing gear only. Not the airplane

QAV 500 PROJECT
QAV 500 PROJECT, this is a project I started but lost interest in, everything is new, unused in excellent condition, no issues here. The following is included: QAV 500 frame w/aluminum arms, T-MOTOR M

Balsa USA Sopwith Pup 1/3 - 2.7
BALSA USA 1/3 Sopwith Pup, has functional landing gear,covered in Solartex, has some patch repairs in the covering but is in good condition has 1/4 scale servos on the elevator,rudder and ailerons,pow

HRB 4S 14.8v 5000mAh 50C-100C Lipo
I have 3 brand new Capacity:5000mAh Continuous discharge rate: 50C Burst Rate :100C Voltage: 14.8V Cells : 4S Size: 6.1×1.89×1.26in/155 mm ×48mm ×32mm (0 - 3mm difference) Weight: 18.27oz/5

China Line RC 6s 4500mah 40c x 2
I ordered the wrong size so will let it go for lower then I paid for quick sale . I paid $86 ea You get 2 lipos for $150 shipped Voltage 22.2V / 6-Cell / 6S1P Discharge Rate 40C Continual /

Parallel and Series T-Plugs
I make these Two lipos to One ESC and Can also make Two Esc's to One Lipo You can get 5 Parallel or 5 Series plugs for $15 or Mix Match

24in 22g JR/Hitec Servo Extensions x 20
I have many sets of these

Vintage Guillow's French Nieuport 28 and Comet Corsair kits
Up for sale is a couple of vintage rubber band power kits by Guillow's and Comet. First kit is a 1957 Guillow's French Nieuport 28 WW 1 fighter with a wingspan of 17.5 inches and a fuselage length

12in Y Connectors 22g JR/Hitec servo extensions x 10
I have a few sets of these These are Y's These are 12in and 22g wire $15.76 shipped for 10

Bullet Connectors 4.0mm x 25 pairs
I have lots of pairs of 4.0mm bullet connectors You get 25 pairs

2mm Gold Bullet Connectors x 30
I have a bunch of these These are 2mm gold bullet connectors You get 30 pairs

Hobby King/ Vantek 88 inch Spitfire for sale
I have a Hobby King 88 inch Spitfire for sale. ( made by vantek for Hobby king). This plane flies great, but I had a lot of trouble getting the landing gear in a position that I could actually taxi i

Bae Hawk 1:4 3/4
Skymaster T-1 BAE Hawk 1:4 3/4 Power Box Cockpit SRS i3-Gyro Servo's Hitec 7954 on control surfaces Hitec 645 Steering Unilite System (2) 123 Batteries 2,500 ma Smoke pump Coc

$5000.00 Carden Extra 300 43%
FIRST $5000.00 PROFESSIONALLY BUILT BY MIKE HILDERBRANDT 43

skyrc b6 ac charger
sky rc b6 ac v2 50w 6 cell ac/dc battery charger $45.00

F4D SKYRAY 71" WING SPAN 96" LONG
THIS SKYRAY IS SCRATCH BUILT FROM ENLARGED PLANS BUILT WITH BALSA AND PLYWOOD COVERED WITH GLASS AND PAINTED WITH ACRYLIC ENAMEL ROBART RETRACTS.WHEELS AND BRAKES, HIGH TECH SERVOS, PLANE HAS 25 FLI

ME 262 107" W.S. PROP VERSION READY TO FLY
THIS ME 262 107~| W.S. HAS TWO FLIGHTS ROBART RETRACTS, TWO NEW O.S. 120 AX ENGINES, PERFECT CONDITION, HAS FIBERGLASS FUSE AND NECELLS, BUILTUP WING,STAB AND RUDDER AND GLASSED ITS A FAST AIRPLANE,

ME 262 107" W.S. PROP VERSION READY TO FLY
THIS ME 262 107~| W.S. HAS TWO FLIGHTS ROBART RETRACTS, TWO NEW O.S. 120 AX ENGINES, PERFECT CONDITION, HAS FIBERGLASS FUSE AND NECELLS, BUILTUP WING,STAB AND RUDDER AND GLASSED ITS A FAST AIRPLANE,

Bridi F7-F Tigercat Kit
Hey guys, I'm trying to make an honest effort to cut back on the amount of gear that I have.  A family member is moving in with us, so something has to go.  I'd rather that it not be me! T

Hangar 9 CAP 232 80in - 2.0
Used but very solid and dependble Wing bag like new and is an extra $50 Tank and fill valve included No engine or electronics included at this price but can finish it ready to fly if you prefer and

YS Engines .45 FS (Side Exhaust)
YS 45 FS motor Motor is in very good condition with good compression. Carb opens freely and the crank turns great with smooth bearing. Comes with the tuned pipe and header .. More info can be foun

Great Planes Cosmic Wind Minnow
This is an Great Planes RC Cosmic Wind Minnow RC model airplane. The airplane is receiver ready and motor was run today and all servos check good. Motor is OS .91 Four Stroke. Has been flown, but not

Quique Somenzini Yak 54 - 86
receiver jr r922 2 - hs3234d servos 3- hitec hs5625mg servos roto flo fuel tank. 2- 2000ma life batt. DA 50 engine.22x8 carbon prop. Plane is in good condition, no crashes, or hard landings.

Lanier Sukhoi SU-31
Pro built 120 inch wing span Lanier Soukoi better than excellent condition , Will forward photo's upon request.Presently Airframe only (no electronics or motor) $1200.00 OBO Would consider trade fo

SlipStream MXS 30cc Electric
For sale is a Slipstream 30cc (72~| wingspan) converted to electric using an 8s setup. This plane is great shape and includes the following: Airframe Brand new Tacon 110 Castle ICE 100 ESC Turni

MTW RE2 NIB
For sale is a NIB MTW RE2 Tuned Pipe. Taken out of the box for pictures only. Looking to get $165 shipped to the lower 48. That saves you $35 plus shipping over a new one. Thanks for looking.

Twisted Hobbys 32" Crack Yak RTF
I'm getting out of the hobby, and selling everything I have. This Crack Yak has a Sunny Sky X2204-21, 1800KV motor on it, and Hitec servos. It has an orange rx from HobbyKing, and I don't remember




 
RCUniverse is a service of Internet Brands, Inc. Copyright © 2001-2018.
Terms of Service | Privacy Policy
 
GET FREE RC CONTENT FOR YOUR WEBSITE

Search | Marketplace | Event Central | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search | RCU Youtube Channel | | RCU Twitter!

Member Locator | Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

Products Videos WattFlyer.com RC Classifieds

RCU2 | 54.161.49.216 | 0 | 1 | 07:00:49 PM EST | NC