Possibly a new project for Takedown?
#1
Senior Member
Thread Starter
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
Possibly a new project for Takedown?
Ok Ive noticed my Micro-t hasnt been running in like 4 months so I decided well instead of just fixing it up why not insanely modify and upgrade it... I plan to get alot of stuff.
This is what I plan on getting here soon.
1) Losi Xcelorin BL ESC- https://killerhobbies.storesecured.c...530-detail.htm
2) Losi Xcelorin 10250kv BL motor- https://killerhobbies.storesecured.c...545-detail.htm
3) Losi micro-t lipo setup- https://killerhobbies.storesecured.c...862-detail.htm
4) 3 racing shox- http://minihobbyshop.com/store/index...oducts_id=7085)
5)Losi Titanium Turnbuckle Tie Rods- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
6) Ximpact body- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
7) Aluminum tranny case- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
8) Wheelie bar- http://www.thetoyz.com/cart/thetoyz_...20MICRO%20BAJA
9) Threaded Shafts f/r- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
This project if I end up doing it wot be able to be started until near chrsitmas because I still have to catch up on a few other projects of mine.
This is what I plan on getting here soon.
1) Losi Xcelorin BL ESC- https://killerhobbies.storesecured.c...530-detail.htm
2) Losi Xcelorin 10250kv BL motor- https://killerhobbies.storesecured.c...545-detail.htm
3) Losi micro-t lipo setup- https://killerhobbies.storesecured.c...862-detail.htm
4) 3 racing shox- http://minihobbyshop.com/store/index...oducts_id=7085)
5)Losi Titanium Turnbuckle Tie Rods- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
6) Ximpact body- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
7) Aluminum tranny case- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
8) Wheelie bar- http://www.thetoyz.com/cart/thetoyz_...20MICRO%20BAJA
9) Threaded Shafts f/r- http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T http://www.thetoyz.com/cart/thetoyz_...name=MICRO%20T
This project if I end up doing it wot be able to be started until near chrsitmas because I still have to catch up on a few other projects of mine.
#2
Senior Member
Join Date: Aug 2007
Location: woodbury,
MN
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
I would buy the brushless motor and esc package. It is only $50.00. http://teamlosi.com/Products/Default...rodID=LOSB9594 Tell me when it is done!
#3
Senior Member
Thread Starter
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
ORIGINAL: novakmaxx
I would buy the brushless motor and esc package. It is only $50.00. http://teamlosi.com/Products/Default...rodID=LOSB9594 Tell me when it is done!
I would buy the brushless motor and esc package. It is only $50.00. http://teamlosi.com/Products/Default...rodID=LOSB9594 Tell me when it is done!
#4
Senior Member
Join Date: Sep 2006
Location: Seattle,
WA
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
Dude, Get the 3 racing shocks. They are actually oil filled versus just aluminum versions of the stock. They really make a difference on how the trucks handles and jumps/lands.
http://minihobbyshop.com/store/index...roducts_id=708
You also don't want a wheelie bar. In order to use it, the slipper will have to be overtightened. Which reduces the tranny life. Which is increased exponentially by using a 2 cell serial lipo.
http://minihobbyshop.com/store/index...roducts_id=708
You also don't want a wheelie bar. In order to use it, the slipper will have to be overtightened. Which reduces the tranny life. Which is increased exponentially by using a 2 cell serial lipo.
#6
Senior Member
Thread Starter
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
ORIGINAL: Mini_Me
Dude, Get the 3 racing shocks. They are actually oil filled versus just aluminum versions of the stock. They really make a difference on how the trucks handles and jumps/lands.
http://minihobbyshop.com/store/index...roducts_id=708
You also don't want a wheelie bar. In order to use it, the slipper will have to be overtightened. Which reduces the tranny life. Which is increased exponentially by using a 2 cell serial lipo.
Dude, Get the 3 racing shocks. They are actually oil filled versus just aluminum versions of the stock. They really make a difference on how the trucks handles and jumps/lands.
http://minihobbyshop.com/store/index...roducts_id=708
You also don't want a wheelie bar. In order to use it, the slipper will have to be overtightened. Which reduces the tranny life. Which is increased exponentially by using a 2 cell serial lipo.
#8
Senior Member
Join Date: Sep 2006
Location: Seattle,
WA
Posts: 1,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
Your paying 14 dollars for those gpm. 21 for the oiled. So its only 7 more? Otherwise the GPM shocks you linked have NO value other than being metal. I don't think they even are meant for grease. Your better off with the stocks if $7 more is going to kill you. [sm=bananahead.gif]
#9
Senior Member
Thread Starter
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
ORIGINAL: Mini_Me
Your paying 14 dollars for those gpm. 21 for the oiled. So its only 7 more? Otherwise the GPM shocks you linked have NO value other than being metal. I don't think they even are meant for grease. Your better off with the stocks if $7 more is going to kill you. [sm=bananahead.gif]
Your paying 14 dollars for those gpm. 21 for the oiled. So its only 7 more? Otherwise the GPM shocks you linked have NO value other than being metal. I don't think they even are meant for grease. Your better off with the stocks if $7 more is going to kill you. [sm=bananahead.gif]
#11
Senior Member
Thread Starter
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
ORIGINAL: quadzilla122
aww takedown i liked your jumping evader avatar better.I think it was an evader[&:]
aww takedown i liked your jumping evader avatar better.I think it was an evader[&:]
#13
Senior Member
Thread Starter
My Feedback: (23)
Join Date: Mar 2004
Location: Oshkosh,
WI
Posts: 7,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
ORIGINAL: quadzilla122
lol all i remeber is that it was a truck jumping and it was yellow i think[&:] dont tell me it wasnt yellow.
lol all i remeber is that it was a truck jumping and it was yellow i think[&:] dont tell me it wasnt yellow.
#15
Senior Member
Join Date: Jun 2007
Location: Brandon, SD
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
RE: Possibly a new project for Takedown?
If you go brushless you will need a new reciever too. Just a heads up.
I broke 4 rear carriers on my micro t with lipo and atomic bb motor. I'm going to get aluminum rear carriers and rear camber links once i have some money.
Also get aluminum steering links. The stock ones SUCK!.......A LOT! Cant wait to see how yours turns out.
Mini Me, My Micro T does wheelies like crazy with the stock slipper tightness. My tranny is fine
I broke 4 rear carriers on my micro t with lipo and atomic bb motor. I'm going to get aluminum rear carriers and rear camber links once i have some money.
Also get aluminum steering links. The stock ones SUCK!.......A LOT! Cant wait to see how yours turns out.
Mini Me, My Micro T does wheelies like crazy with the stock slipper tightness. My tranny is fine