RE: OFFICIAL MINI E-REVO THREAD!!!
yeah, the max amps batts are way overpriced imo... I am never buying another one.. plus they have hyperion tap on them which I had to get an adapter for to charge the thing with my charger (which has Align taps). I am going with Zippys from now on... they perform great and priced so well!
|
RE: OFFICIAL MINI E-REVO THREAD!!!
Does anyone know what website has them instock? Please help!
ORIGINAL: dacaur ORIGINAL: micro guy I think they are they same? As peelin out said can anyone plese confrim it before i order? The stock oil is 45 wt, so yes thats what you would want to refill the fronts if you are happy with the damping now, but I would go heavier, 50 or 55 and 65 in the rear if you run two batt's.... Thats where I plan to start anyway |
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: djcmeeks Don't know much about Rhino's. That is a stellar deal. What do you do for balancing connectors? I've always been happy with MaxAmp products and the customer service is great. Their packs have always lasted me a very long time. I don't mind paying more for quality. If Rhino's are a good pack I might have to check them out. I don't expect you to buy 5 Rhinos at one time.....but maybe 3 or 4 to double your Revo sessions and pocket the money saved! With the $150 you spent on MaxAmps, you get 1 session and an empty wallet:D All Rhinos have balance/charging leads. I just hook-up an Astroflight $20 balancer and charge directly at the + & - . I'm sure there are adapters for your set-up. I hope I answered your question. |
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: Aloha Flyer ORIGINAL: djcmeeks Don't know much about Rhino's. That is a stellar deal. What do you do for balancing connectors? I've always been happy with MaxAmp products and the customer service is great. Their packs have always lasted me a very long time. I don't mind paying more for quality. If Rhino's are a good pack I might have to check them out. I don't expect you to buy 5 Rhinos at one time.....but maybe 3 or 4 to double your Revo sessions and pocket the money saved! With the $150 you spent on MaxAmps, you get 1 session and an empty wallet:D All Rhinos have balance/charging leads. I just hook-up an Astroflight $20 balancer and charge directly at the + & - . I'm sure there are adapters for your set-up. I hope I answered your question. |
RE: OFFICIAL MINI E-REVO THREAD!!!
as far as age goes, if you treat a lipo well, it should last you years... I know people who fly planes with 5+ year old batteries they still use and they work great.. I have several el cheapo lipos I got off ebay two years ago which still work great.. I mean, I guess it's good to get a high quality item which a good company behind it, in that respect paying the extra for Max Amps is worth it I suppose.. but ymmv.. I guess it's can be a combination on what you have a budget for and are willing to deal with.
|
RE: OFFICIAL MINI E-REVO THREAD!!!
Hey guys, has anybody had any experience running 1/10th foams with dual Nimh batteries in series? What would be the best gearing for it. I was thinking that the smaller size of the tires might 'gear' it down enough to still use the stock pinion(28t I think). Any thoughts?
|
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: peelin_out as far as age goes, if you treat a lipo well, it should last you years... I know people who fly planes with 5+ year old batteries they still use and they work great.. I have several el cheapo lipos I got off ebay two years ago which still work great.. I mean, I guess it's good to get a high quality item which a good company behind it, in that respect paying the extra for Max Amps is worth it I suppose.. but ymmv.. I guess it's can be a combination on what you have a budget for and are willing to deal with. On a different subject.....I checked the New/Updated offering from Team Losi 1/18th scale; The Mini-LST2 Limited Edition RTR: http://www.horizonhobby.com/Products...dId=LOSB0217LE Not due until later this month! (Can't Wait!)- With the furer of the Revo VXL and excitement of the Vendetta and Mini Hyper STe what will be the upgrades for the MLST2 to compete? Widertrack with upgraded suspension?, BL motor or fortified transmission?, New Body? or more Aluminum Bling? NO! What you get for $220 is A BLACK PAINT SCHEME TO THE OLD BODY, A 7.4V 1000mAh 2S LiPo battery as apposed to the NiMH (I swapped for lipo as soon as I bought my first MLST 3yrs ago), Mini-Torquer chrome dish wheels with mounted Mini-Duplex tires- Ok so the rims and tires look different and FINALLY a Losi radio system with Spektrum 2.4GHz DSM technology! And get this, were lucky.....the suggested retail price was $299...I saved nearly $80! Why would I ever invest $40 of the $80 dollars I saved for a NEW Mini E-Revo VXL. TEAM LOSI....YOUR GENIUSES! |
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: Aloha Flyer On a different subject.....I checked the New/Updated offering from Team Losi 1/18th scale; The Mini-LST2 Limited Edition RTR: http://www.horizonhobby.com/Products...dId=LOSB0217LE Not due until later this month! (Can't Wait!)- With the furer of the Revo VXL and excitement of the Vendetta and Mini Hyper STe what will be the upgrades for the MLST2 to compete? Widertrack with upgraded suspension?, BL motor or fortified transmission?, New Body? or more Aluminum Bling? NO! What you get for $220 is A BLACK PAINT SCHEME TO THE OLD BODY, A 7.4V 1000mAh 2S LiPo battery as apposed to the NiMH (I swapped for lipo as soon as I bought my first MLST 3yrs ago), Mini-Torquer chrome dish wheels with mounted Mini-Duplex tires- Ok so the rims and tires look different and FINALLY a Losi radio system with Spektrum 2.4GHz DSM technology! And get this, were lucky.....the suggested retail price was $299...I saved nearly $80! Why would I ever invest $40 of the $80 dollars I saved for a NEW Mini E-Revo VXL. TEAM LOSI....YOUR GENIUSES! On the left is my Mini Monster Baja with a Raminator Body(recognize the wheels), on the right is my mini quake with the Mini Monster Baja body http://www.dacaur.com/rc/minilst/lstquake.jpg |
RE: OFFICIAL MINI E-REVO THREAD!!!
Anyone know where I can get spare body posts?
|
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: Aloha Flyer ORIGINAL: peelin_out as far as age goes, if you treat a lipo well, it should last you years... I know people who fly planes with 5+ year old batteries they still use and they work great.. I have several el cheapo lipos I got off ebay two years ago which still work great.. I mean, I guess it's good to get a high quality item which a good company behind it, in that respect paying the extra for Max Amps is worth it I suppose.. but ymmv.. I guess it's can be a combination on what you have a budget for and are willing to deal with. |
RE: OFFICIAL MINI E-REVO THREAD!!!
Has anyone changed ECU's yet? I want to get a Mamba Max ecu but not sure if one will fit the stock location?
|
RE: OFFICIAL MINI E-REVO THREAD!!!
I asked earlier but got no response. Does anyone have any recommendations for gearing to use when running with 1/10th scale sedan foams. I will be running 14.4v (series). Anybody....?javascript:void(AddText(':D','_image/s2.gif'))
|
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: little_mox84 Has anyone changed ECU's yet? I want to get a Mamba Max ecu but not sure if one will fit the stock location? |
RE: OFFICIAL MINI E-REVO THREAD!!!
What are the specs of the motor and esc?
I want to run my own brushless stuff I recently purchased.. Anyone try a Dynamite C4? it says it can fit 1/16 scale cars.. |
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: Dan H Anyone know where I can get spare body posts? You have 2.5hrs left at Ebay: http://cgi.ebay.com/Traxxas-1-16-E-R...lenotsupported |
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: klaze What are the specs of the motor and esc? I want to run my own brushless stuff I recently purchased.. Anyone try a Dynamite C4? it says it can fit 1/16 scale cars.. |
RE: OFFICIAL MINI E-REVO THREAD!!!
Jaejw1 is right i mounted a MM in mine.. here is a film, shorter rear pushrods, still way to springy..
http://www.youtube.com/watch?v=juGjHvNiCUk Pic on the car http://rc-xtreme.blogspot.com/2009/0...rom.html#links |
RE: OFFICIAL MINI E-REVO THREAD!!!
Just letting you guys know about the new body styles for the E-Revo VXL at: http://www.thetoyz.com
Halo Warthog Clear body http://www.thetoyz.com/cart/thetoyz_...&cat_name=MINI E REVO Baja Bug Clear Body http://www.thetoyz.com/cart/thetoyz_...&cat_name=MINI E REVO |
RE: OFFICIAL MINI E-REVO THREAD!!!
Doing flips is going to be a normal thing during offroad races in a few years..
|
RE: OFFICIAL MINI E-REVO THREAD!!!
ORIGINAL: klaze Doing flips is going to be a normal thing during offroad races in a few years.. |
RE: OFFICIAL MINI E-REVO THREAD!!!
I've searched this thread and forum as well as a bit on youtube. How fun is the mini e-revo in the grass? Most of my run times are in medium length lawn and I would hate to dump the cash out for one of these guys to be bored in the yard. I see the speed videos on pavement and then there are a couple in the grass but even then videos can be deceiving when it comes to speed. I never get a real feel for how big of a yard they are being run in and how much fun they really would be. For bashing in the yard, much fun?
|
RE: OFFICIAL MINI E-REVO THREAD!!!
I would say its about 1/2 - 2/3 speed in the grass, more or less depending on length. That said, i would say its more fun on grass than pavement, because it doesn't roll as easy. Its definitely faster than your typical mini on the grass, in my opinion, the tires work pretty good, but with a tire change to something like masher 2000's (I know they don't make them in 1/18 scale, but something similar would be good) it would definitely be better.
I have not had any problems with it thermaling in the grass on 2 stock packs run in parallel, but the motor is definitely hotter after running in grass than on pavement. Definitely don't do series packs on grass!! If you know you are going to run mostly in grass, you actually want to gear down a little and it will go faster. The stock gearing is more biased toward speed than power, I would say throw on the speed pinion but keep it at 7.2 or 7.4 volts and it will run cool in the grass, and probably be faster than the stock gearing (but only in the grass) On my mini quake, when I went down 2 teeth on the pinion from stock, the speed in grass about doubled, while I only lost a couple MPH on pavement... In all honesty though, if you can afford it, 1/10 scale 4 wheel drive is the way to go in grass. Personally I cant afford to drop $200+ on batteries for a 1/10 electric, so 1/18 - 1/16 is what I run for electric, and 1/8 for nitro :D |
RE: OFFICIAL MINI E-REVO THREAD!!!
DACAUR gave a thorough answer to the grass question. To me it comes down to SPEED and then CLEARANCE.
If it looks fast on pavement but has car styled clearance (1cm or under), the drag will not make it fun in the grass. However, if it's fast on pavement and has 2CM and up of clearance, Less drag means there is fun to be had. All bets are off if you keep your lawn like the Floriida Everglades! :D |
RE: OFFICIAL MINI E-REVO THREAD!!!
Adjustble pushrods for the E-Revo VXL 1/16
By Thomas Pettersson To this date i have been using ball-ends and hollow balls for the Stampede, they are trimemd to fit and working ok. To bad when the car compress they bind when the car flatsot...somthing like a swaybar... I stoped by the LTD (local traxxas delaer) and did find some real nice stuff. Parts that will be needed. -DU-BRO Ballends/swivels #369 2/56 - 4/40 -Short AE turnbuckles 45mm (im using FT) -Longer AE Turnbuckles 51mm (same as above) -Drill 3mm -Drill 2.5mm -Plier protect the "mouth" with some tape Parts: http://i123.photobucket.com/albums/o...s/DSC_0031.jpg Take out the ball, use the 2.5mm drill to get bigger hole http://i123.photobucket.com/albums/o...s/DSC_0033.jpg The little washer that follow must be drilled to, they are used @ the rockers http://i123.photobucket.com/albums/o...s/DSC_0038.jpg You have to drill app 6mm in the ball"stud" when you use short turnbuckle for pushrod so you can screw them together tight. Use the 3mm drill http://i123.photobucket.com/albums/o...s/DSC_0039.jpg http://i123.photobucket.com/albums/o...s/DSC_0040.jpg When this is done, all you have to do is mount everything on the car.. http://i123.photobucket.com/albums/o...s/DSC_0044.jpg As you can see @ the rockerarm i am using the little washer, it must be mounted on "top", it is tight, litle force but it will work.:p FRONT http://i123.photobucket.com/albums/o...s/DSC_0041.jpg REAR TOE LINK (same as steering) http://i123.photobucket.com/albums/o...s/DSC_0045.jpg http://i123.photobucket.com/albums/o...h_DSC_0046.jpg http://i123.photobucket.com/albums/o...s/DSC_0047.jpg |
RE: OFFICIAL MINI E-REVO THREAD!!!
Hi there I was looking to purchase the mini erevo or slash but I have alot of questions. *First of all how long does it take to charge the stock battery on 1.5amps.
*How durable is the lilbeast? I saw someone split there truck in half[:o] *How well does it handle? I once had an rc18t and a mamba 25 with 8000kv motor running on 6cells. was handful I kinda hated it *How prone to flipping is this thing? *Whats more stable the slash or the ervo? I realize the erevo is wider but the slash is lower *Say 1/8th scale vs 1/16th which is funner in your opinion *Is it possible to get the roller erevo for under 200? *How well does the vehicle perform with the 380 motor? *Will the mamba 25 system work? *Lastly how durable is the drivetrain on 12 cells? Thanks |
All times are GMT -8. The time now is 01:43 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.