View Single Post
Old 09-18-2010, 11:48 AM
  #1  
macdona
Senior Member
My Feedback: (3)
 
Join Date: May 2003
Location: Reno, NV
Posts: 260
Likes: 0
Received 0 Likes on 0 Posts
Default problem with binding

Whem JR/Spectrum bought out the module for the JR radio I jumped into it. Worked great untill the last week. The radio went out of bind on takeoff run. Tried to rebind but it jumped in and out. Today I tried binding in my shop and couldn't get it to hold and noticed that when I pushed on the bind button that the module moved. Pulled the module, cleaned the contacts and using a very small needle nose slightly twisted the contacts. Also wedged a small piece of foam on one side of the module. All my problems went away. I thought I would post this in case someone else might be having problems