RE: Sebart Angel S Evo 50E
I took a piece of White electrical tape and made a loop on the back that creates a lifting point. I use a small piece of blenderm tape to hold the canopy on. This is a very nice flying model and will do both precision and 3D. I am currently running a Scorpion 4020-10 on 5S 5000 MAH 40C packs. 7.5 minute flights are using 50% of the battery. Given everything the 4000 MAH packs are better but the flight times are limited to 7 minutes. I am going to build a Miss Wind S and just collecting parts for that. I wish they had the Miss Wind S in the 110 or 140 size but alas they do not offer this.