RCU Forums - View Single Post - Byron AT-6 Build /Rebuild
View Single Post
Old 03-02-2011, 07:16 PM
Join Date: Feb 2007
Location: Dearborn, MI
Posts: 3,211
Received 0 Likes on 0 Posts
Default RE: Byron AT-6 Build /Rebuild


would it work if you flipped the elevator pushrods and cranks to be inboard of the servos. And then the pushrod goes to the elevator on the same side rather than crossing over to the opposite side? I am guessing since I cant tell the angle of the fuselage tapering to the tail.