View Single Post
Old 05-01-2011, 05:32 PM
WacoNut's Avatar
Join Date: Jan 2005
Location: Blanchester, OH
Posts: 6,563
Likes: 0
Received 4 Likes on 3 Posts
Default RE: Band saw or scroll saw

I use both, I also use my table saw for ripping the ply. I have also been know to rip out some stringers from sheeting when needed on the table saw. A band saw will cut faster and cleaner than a scroll saw but for inside cuts the scroll saw is a must. A good belt/disc sander combo goes a long ways as well. I cut my outside cuts about 1/32 oversize then sand them down to final shape.