RE: Hangar 9 produced the Twin Otter!
Joe,
I've been reading the string on RCGroups for the Twin Otter (wow, that's good stuff). I'm half way thrugh it. One of the early on posts had this question: "I want to use 3-bladed props & Power 25 motors. Would 12x8 3 blade work?" The answer was "12x8 3 blade is too much prop for Power 25, even with a 3S pack. Would have to drop down to the 11x7 either MAS or Graupner props...." So,here's my question along those same lines: If I want to stay with the 25s and use the suggested 3S 3200 batteries (since I have a number of these already), will I be OK turning the 11x7 3 blade in your opinion?
thanks in advance for your advice on this!
Tom