RE: My first serious paint job.
Well first I started out with some pictures that I made in Flexi10 Software.I already have the paper size setup. Flexi10 automatically set ups the contour cut marks. Do not worry about the colors as they are not going to come out in the cuts. Next I let the cutter do its thing while I take a break for a few minutes. After the cutting is done, I get the paper ready for weeding. I pull the negative off to leave the remaining cuts on the blue. Next I really weed out the cuts to leave a perfect detailed decal. Now I am ready to put on the underside of the truck body for painting which I will put the progress pics up later.