RCU Forums - View Single Post - Jetcat 180RX
Thread: Jetcat 180RX
View Single Post
Old 01-17-2012 | 03:00 PM
  #39  
schroedm's Avatar
schroedm
My Feedback: (1)
 
Joined: Jul 2002
Posts: 5,193
Likes: 0
Received 1 Like on 1 Post
From: SevenoaksKent, UNITED KINGDOM
Default RE: Jetcat 180RX


ORIGINAL: DUCMOZ

Hi All, I normally do not post. But after reading these, because I just received my 180, I spoke with Bob at Jetcat USA. He advised me that he has checked the USA turbines and they seem to have the same trottle-up timing as the 160SX. I hope this helps.

Thanks
I'm not sure how that could be! Jetcat onlyhad 1 ECU mapping for this engine up until this afternoon when they created and tested a new one. As a result all 180RXs will perform the same. I don't see 'USA' turbines being any different - they all come from Jetcat with the protected ECU mapping nobody can change.
My advice would be to fire it up and see for yourself!!! Jetcat would not admit the problem and express ship new ECUs to some of us to confirm the new settings knowing this is all public unless there truly was a problem.