RCU Forums - View Single Post - Suggestions Please for micro p-51 (Big newb! here)
Old 01-24-2012, 08:25 PM
  #1  
meloman408
Junior Member
 
Join Date: Nov 2011
Location: san jose, CA
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default Suggestions Please for micro p-51 (Big newb! here)

So I got this plane from tower hobbies thinking that it was small and i practice how to fly at home, but I didn't get any electronics because the kit a tower hobbies was freaking too expensive now I am ordering the setup stuff from tower hobbies and can really use some suggestions. First I wanted to see if I can put the AP05 motor on it or is that too much power and then what battery and esc I would need to get. From the manual it says to use a C05 motor a 7.4v 100-200mah lipo and a 4025 prop, but I HK dont have that motor so this is what I was thinking

Motor: AP05
http://www.hobbyking.com/hobbyking/store/__9662__HobbyKing_AP05_3000kv_Brushless_Micro_Moto r_5_4g_.htmlESC:

BATTERY: 120mah 2 cell
http://www.hobbyking.com/hobbyking/store/__19422__Turnigy_nano_tech_120mAh_2S_25C_Lipo_Pack _E_flite_micro_series_compatible_.html

ESC: 10a HK @ 8g
http://www.hobbyking.com/hobbyking/store/__21247__HobbyKing_10A_ESC_1A_UBEC.html

Servo: 2*2.5g
http://www.hobbyking.com/hobbyking/store/__3714__HobbyKing_2_5g_17kg_12sec_Micro_Servo.htmlRx:

Prop: 5*3 or 4025 very unsure on this one

Rx: Orange 3g reciever
http://www.hobbyking.com/hobbyking/store/__11972__OrangeRx_R410_Spektrum_DSM2_Compatible_4C h_2_4Ghz_Receiver_.htmlRx:
Thanks a ton guys and yea I know this shouln't be a trainer plane but I don't plan on flying it anytime soon nut until atleast master my slowstick