Well here is my to cents. I had the exact same plane and it did the stame thing as you are discribing. I spent days on the flying feld trying to make to quit and have a nice slow landing, but know matter what I did it still tryed to stall out on landing. After trying about every thing I could thing of and putting the CG in about every place conceavable me and a few of the guys came to the conclusine that I would just have to bring the plane in hot. It was the only thing I did not like about the plane. I did not try flaps but that might have worked and looking back at it I belive it just might have fixed it but once I got use to bring it in hot it really was not that bad. Just give it a little down to get it about a foot or so off the ground cat power and give a little up and it will make a perfect 3 point landing every time. As far as changeing the CG I set it to where it would fly level inverted and left it there.