Hey Guys,

Just got a Leo 2 from Flea Bay, and after taking it apart and reassembling to make sure it was put together correctly for battling
I have found that there are a couple programming issues. I am running a E-flite LP5DSM transmitter and a Spektrum AR6100e receiver. Ihave it plugged in as follows
Channel 1 (J1) to Rudder
Channel 2 (J2) to Throttle
Channel 3 (J3) to Elev
Channel 4 (J4) to Ale

Dip Switches on the transmitter are set as follows
1-4 off
5-7 on
8-10 off
All Trims are set to neutral

The tank drves left and fights right. The reverse of my Tiger which is cool.
Problem is when I turn on the tank it runs fine butsometimes when I rotate the turret right itchanges thelighting set up and the turret will not rotate until ucycle back to the b1/ni mode it doesnt seem normal to me I am probably missing something I am the first to admit I am a noob at this stuff please advise with any assistance youhave tooffer.

Jon