RCU Forums - View Single Post - plug and play onboard glow system
View Single Post
Old 06-25-2012, 12:31 PM
  #3  
RC_Fanatic
My Feedback: (1)
 
Join Date: Feb 2002
Location: Sutter Creek, CA
Posts: 1,042
Received 0 Likes on 0 Posts
Default RE: plug and play onboard glow system

I've used a couple of the C-tronics on-board glow for years and love them but - they are no longer available. The nice thing about them is that they are truly plug-and-play. Turn on transmitter with throttle at zero and turn on receiver. No glow until you go to high throttle and back to zero. Glow full on at idle, pulsed up to 1/3. Go to idle, then cut-off and driver shuts off. No worry about reversed throttle.

If yours is like that, you have a winner and I want two!