RE: Converting my existing BlackMagic V2.2 to electric
Well guys,I performed another test today on my BM electric conversion using the E-Flite Power 160. I must say the results this time were im pressive, I'm getting to like this motor, iot certain;ly has a great deal of power.
Todya I ran a 20"x13" APC-E prop and obtained the following results:
Voltage-38.08V, 84.4A, 3300W all at full throttle.
I suspect if I go to a larger prop I can get better results. For now, however, I am a bit comforted. Tomorrow I will go fly
This exercise has proven to be interesting, although somewhat confusing but that is what the learning curve is all about.
I would like to thank all the people who inputed information and comments as they were valued highly.
Orlando (aka crashlander)