RCU Forums - View Single Post - New Mold Making & Resin Casting Book

11-01-2013 | 12:17 PM

#1

BOC262

Junior Member

Joined: Oct 2013

Posts: 1

Likes: 0

Received 0 Likes on 0 Posts

New Mold Making & Resin Casting Book

This may be of interest to some of you:

Secrets of Expert Mold Making & Resin Casting, 2nd edition, written and illustrated by Karl Juelch. 120 pages, over 100 detailed illustrations with supporting text show and tell exactly how to create high performance molds capable of making perfect, professional quality castings.

Most books and articles leave out important bits of information, making it impossible for the beginner to get really good results. I was lucky enough to apprentice with a master mold maker who shared the secrets of making flawless castings. I then spent a number of years running my own mold making and resin casting business. All that knowledge and experience went into writing this book--nothing has been left out, all the secrets are revealed. Starting from the simplest molds, the book will guide the reader to more advanced techniques using vacuum, pressure and heat for the most demanding casting needs. Also discussed are methods for making core molds to produce hollow castings. To the best of my knowledge this subject has never been covered in print before. Emphasis is on low cost, low tech methods that are suitable for home shop use.

Here is a link to a review of the 2nd edition, the newest version of the book:

http://www.nscale.net/forums/showthread.php?31697-Mold-Making-and-Casting-Book&p=341099#post341099

and here is a link to 2 reviews of the original book. This version is no longer available:

http://12emodels.free.fr/5-ressource...old_making.htm

The book is available on Amazon and Amazon UK:

http://www.amazon.com/Secrets-Expert.../dp/1492294942

Reply Like