RCU Forums - View Single Post - Unequal elevator halves
View Single Post
Old 01-30-2014, 01:03 PM
opjose's Avatar
Join Date: Nov 2005
Location: Poolesville, MD
Posts: 12,603
Likes: 0
Received 0 Likes on 0 Posts

Originally Posted by speedracerntrixie View Post
I appears to me that because of the built up construction of the elevators and a lack of care while covering that the elevators may have a slight warp. This is easily taken out by holding an opposite twist and re-shrinking the covering.
Normally I would agree but look closely at the photo.

The elevators are not warped from the LE to the TE.

Rather the 4-40 screw "horns" he is using are at different positions relative to each other.

The right one is slightly forward of the left. --- Geometry is wrong.