RCU Forums - View Single Post - oil mix for gas engine
View Single Post
Old 08-17-2014, 04:53 PM
  #56  
rt3232
My Feedback: (6)
 
Join Date: Dec 2004
Location: hastings, MN
Posts: 5,953
Likes: 0
Received 1 Like on 1 Post
Default

Well guys I will step in hear and muddy the water been flying gassers for over 20 years ( started with a G-38) and I don't like the smell of auto gass and the ethanol, me and my flying buddy switch to 100 ave gas from our local airport when the ethanol became mandatory, and yea it's $ 5.50 a gal but it has vary little smell burns clean (like coloman fuel) on Oil for break in I use any good ashless 2 cycle oil for the first gal on the ground,at the recommended mix, Then it is in what ever plane I got the engine for and fly it for the next gallon then 50 :1 klutz oil all the way. the other thing you can store it as it will not go sower like pump gass and I do add 1oz per gallon of sta-bill or sea-foam to inhibit water.

Cheers Bob T
AMA13377